The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-06-2010, 11:02 AM   #1
lil hoodlum
Registered User
 
lil hoodlum's Avatar
 
Join Date: Oct 2009
Location: Denton, Texas
Posts: 1,705
Lube a spedometer cable?

Good afternoon everyone. I recently installed a new spedometer cable and I am wondering should I put some kind of lubrication in the cable housing? I have avoided any highway cruising 70+ MPH because I don't want to ruin it.

If yes, what kind of lube and how to do it?

Thank you for your time!

Keith
lil hoodlum is offline   Reply With Quote
Old 06-06-2010, 11:42 AM   #2
cdowns
Senior Member
 
cdowns's Avatar
 
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
Re: Lube a spedometer cable?

autoparts store has speedometor cable lube// it's dry graphite based and actually polishes the cable and inside the housing for resistance free spinning
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane

MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF

DONT BELIEVE EVERYTHING YOU THINK

TAKE MY ADVISE;I DON'T USE IT ANYWAY
cdowns is offline   Reply With Quote
Old 06-06-2010, 11:49 AM   #3
Stocker
20' Daredevil (Ret)
 
Stocker's Avatar
 
Join Date: May 2003
Location: Jefferson State
Posts: 13,589
Re: Lube a spedometer cable?

^ x2... I have used lightweight lithium grease without problems, but graphite is the way to go.
__________________
- Mike -

1972 K20 LWB 350/350/205

RIP El Jay
Stocker is online now   Reply With Quote
Old 06-06-2010, 06:46 PM   #4
71 super
Registered User
 
71 super's Avatar
 
Join Date: Sep 2005
Location: Canton North carolina
Posts: 3,079
Re: Lube a spedometer cable?

If you have problems getting the graphite into the sheath, add some rubbing alcohol and create a good mixture. Use a squirt bottle to get the liquid into the cable, the alcohol will act as a carrier and evaporate shortly after installation leaving behind the graphite as a lubricant.
__________________
67 blue step side- bb
68 gold and white swb cst anniversary
68 custom swb hot rod Ls swap
69 swb cst 6 cylinder/ overdrive
69 black/black cst bb swb
70 orange and white cst Canada built truck swb bb
71 black and white super swb bb
71 red and white super swb
72 green and white super swb 4x4
62 nova wagon 400 series Ls swapped
68 Camaro 327/4 speed- 1 owner, original paint
66 Volkswagen bettle
69 auto stick Volkswagen Beetle

Last edited by 71 super; 06-06-2010 at 06:46 PM.
71 super is offline   Reply With Quote
Old 06-07-2010, 07:50 AM   #5
mrein3
Registered User
 
mrein3's Avatar
 
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,253
Re: Lube a spedometer cable?

I always pull the cable from the back of the odometer. Then slid the center part out of the sheath. Lube. Re-install.

Never use that white lithium lube in the north country where it gets cold. That stuff freezes.
__________________
'70 cab, '71 chassis, 383, TH350, NP205.
'71 Malibu convertible
'72 Malibu hard top
Center City, MN
mrein3 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com