Clutch Head v Phillips Head - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andice · 06-11-2010, 12:32 PM

I need some advice on the type of bolts to purchase for the rear fenders of my '64 SB Fenderside. The bolts that were on the truck before disassembly were hex head.

Andice · 06-11-2010, 12:36 PM

Oops! These would be the bolts that mount the rear fender to the bedsides.

slorio · 06-11-2010, 01:02 PM

Andice:
I have a 1966 GMC fenderside. When I took mine apart, the bolts were 5/16"X 18 coarse thread with phillips head. The bolts appeared to be the originals. I don't think clutch head bolts were used on our trucks.
Regards,
Steve
New Orleans

Andice · 06-11-2010, 01:50 PM

Slorio:

Thank you for the response/info.

markeb01 · 06-11-2010, 03:35 PM

My 1960 GMC stepside originally came with clutch head fender bolts. I replaced mine with conventional hex head bolts. Not sure when or if the factory ever did the same. If originality isn't important, button head allen socket screws would be much easier to install and remove than the clutch head style, while remaining snag free to anything loaded in the bed.

*LILRED66* · 06-12-2010, 10:33 AM

The early sixties trucks, used clutch head, both behind the door panels and on the rear fenders. I am not sure what year they were changed to phillips head.

With the correct tips, the clutch heads are kind of novel.

06-11-2010, 12:32 PM	#1
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Clutch Head v Phillips Head I need some advice on the type of bolts to purchase for the rear fenders of my '64 SB Fenderside. The bolts that were on the truck before disassembly were hex head.

06-11-2010, 12:36 PM	#2
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: Clutch Head v Phillips Head Oops! These would be the bolts that mount the rear fender to the bedsides.

06-11-2010, 01:02 PM	#3
slorio Registered User Join Date: Sep 2006 Location: Louisiana Posts: 374	Re: Clutch Head v Phillips Head Andice: I have a 1966 GMC fenderside. When I took mine apart, the bolts were 5/16"X 18 coarse thread with phillips head. The bolts appeared to be the originals. I don't think clutch head bolts were used on our trucks. Regards, Steve New Orleans

06-11-2010, 01:50 PM	#4
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: Clutch Head v Phillips Head Slorio: Thank you for the response/info.

06-11-2010, 03:35 PM	#5
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: Clutch Head v Phillips Head My 1960 GMC stepside originally came with clutch head fender bolts. I replaced mine with conventional hex head bolts. Not sure when or if the factory ever did the same. If originality isn't important, button head allen socket screws would be much easier to install and remove than the clutch head style, while remaining snag free to anything loaded in the bed. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

06-12-2010, 10:33 AM	#6
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Clutch Head v Phillips Head The early sixties trucks, used clutch head, both behind the door panels and on the rear fenders. I am not sure what year they were changed to phillips head. With the correct tips, the clutch heads are kind of novel. Last edited by LILRED66; 06-12-2010 at 10:34 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.