My new interiror - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GGinferno · 04-01-2010, 01:57 AM

Hey guys check it out! My new interior almost complete! The truck is going from orange to Flat black with gloss black flames with red pinstripe! the dash in not done yet...still need the pinstriping done...

DWright · 04-01-2010, 05:51 AM

Born Lucky · 04-01-2010, 06:17 AM

Nice.
I like the colors. I am thinking os spraying my with a splash of red to.
Also, love the shifter!

**DPowers** · 04-01-2010, 09:28 AM

Cool- really "pops" out at you.

GGinferno · 04-01-2010, 09:29 AM

Ya i think the red will looks good with black..but then again black matches with everything....the red on the pictures looks really bright...but its not these were night time pictures i will take some in the day time...like is said the dash is still going to get som red and white pinstriping and the stering wheel and column is going to get black and white pinstriping

vin63 · 04-01-2010, 01:41 PM

Very cool! I dig the shifter. Are able to see the gauge mounted under the dash OK, or does the steering wheel spoke block your view? I was thinking of mounting my tach in that area.

REDNOSE65 · 04-02-2010, 12:48 PM

Quote:

Originally Posted by GGinferno

Hey guys check it out! My new interior almost complete! The truck is going from orange to Flat black with gloss black flames with red pinstripe! the dash in not done yet...still need the pinstriping done...

Right On, Flat Black and Red...That's Classic Old School.

62 Bowtie · 04-02-2010, 04:04 PM

Looks good

I like the old school look too!

tsm · 04-10-2010, 11:06 PM

I really like this. Nice job! What type of steering wheel is that? Sorry if it's a stupid question.

GGinferno · 04-11-2010, 04:04 AM

Vin the tach is ok! The picture looks like its blocking it but its not! Its actually works out perfect! I always built the home built low buck rat rod look...and red & black has always been the old school look...and the steering wheel is the stock! I did give a touch of life with a little of JB weld to fill in the gaps and cracks..

and little paint...and you see the results.

Rich 5150 69 · 04-11-2010, 10:37 AM

Cool, you going to highlite the seat with red as well. By the way Sam`s cruise night at Mikes diner will start soon, (the old Mels diner at sheldon/99 ) you going its on Tuesday nights....

GGinferno · 04-11-2010, 02:33 PM

Nice! its right by the house to! ohhh yeah i will be thier for sure!

The Seat is going to get done in a black vinyl with red tubbing and red stiching the center of the seat is going to be red aswell!

Shaky · 04-11-2010, 03:29 PM

Shift knob?

GGinferno · 04-11-2010, 11:11 PM

Oooh yeaaah! the knob is on its way! chack it out! my wife is going to paint it as soon as it gets in!

Shaky · 04-12-2010, 05:38 AM

Ah yes - I knew it was gonna be somethin' good!

**scotts62** · 04-12-2010, 08:03 AM

I like it!

GGinferno · 06-08-2010, 04:35 PM

Finally done with shifter knob!

REDNOSE65 · 06-08-2010, 05:25 PM

Quote:

Originally Posted by GGinferno

Finally done with shifter knob!

I dig it, man...2 Thumbs Up!!!

protrash64 · 06-08-2010, 06:30 PM

Right on!! Looks cool GG.

likaroc13 · 06-09-2010, 12:29 AM

nice work...that'll fit nicely into your color scheme

T-Bone Tommy · 06-14-2010, 07:35 PM

Where did you get that knob????????

GGinferno · 06-14-2010, 08:14 PM

Thanks guys! T-Bone i got from www.jimmyflintstonestudios.com only 15 Bucks! unpainted

04-01-2010, 01:57 AM	#1
GGinferno DiablosWeldingFabrication Join Date: Jun 2009 Location: Elverta ,CA Posts: 201	My new interiror Hey guys check it out! My new interior almost complete! The truck is going from orange to Flat black with gloss black flames with red pinstripe! the dash in not done yet...still need the pinstriping done... Attached Images

04-01-2010, 05:51 AM	#2
DWright Shlong Bed Club Join Date: Apr 2009 Location: Milford, VA Posts: 220	Re: My new interiror __________________ "If it ain't broke, hit it with a hammer, then fix it.."

04-01-2010, 06:17 AM	#3
Born Lucky Registered User Join Date: Mar 2010 Location: St Charles MO Posts: 481	Re: My new interiror Nice. I like the colors. I am thinking os spraying my with a splash of red to. Also, love the shifter!

04-01-2010, 09:28 AM	#4
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: My new interiror Cool- really "pops" out at you. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

04-01-2010, 09:29 AM	#5
GGinferno DiablosWeldingFabrication Join Date: Jun 2009 Location: Elverta ,CA Posts: 201	Re: My new interiror Ya i think the red will looks good with black..but then again black matches with everything....the red on the pictures looks really bright...but its not these were night time pictures i will take some in the day time...like is said the dash is still going to get som red and white pinstriping and the stering wheel and column is going to get black and white pinstriping

04-01-2010, 01:41 PM	#6
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: My new interiror Very cool! I dig the shifter. Are able to see the gauge mounted under the dash OK, or does the steering wheel spoke block your view? I was thinking of mounting my tach in that area. __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes Last edited by vin63; 04-01-2010 at 01:42 PM.

04-02-2010, 04:04 PM	#8
62 Bowtie Registered User Join Date: Nov 2008 Location: Elk Grove Ca Posts: 629	Re: My new interiror Looks good I like the old school look too!

04-10-2010, 11:06 PM	#9
tsm Registered User Join Date: Mar 2010 Location: Sacramento Posts: 14	Re: My new interiror I really like this. Nice job! What type of steering wheel is that? Sorry if it's a stupid question.

04-11-2010, 04:04 AM	#10
GGinferno DiablosWeldingFabrication Join Date: Jun 2009 Location: Elverta ,CA Posts: 201	Re: My new interiror Vin the tach is ok! The picture looks like its blocking it but its not! Its actually works out perfect! I always built the home built low buck rat rod look...and red & black has always been the old school look...and the steering wheel is the stock! I did give a touch of life with a little of JB weld to fill in the gaps and cracks.. and little paint...and you see the results.

04-11-2010, 10:37 AM	#11
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: My new interiror Cool, you going to highlite the seat with red as well. By the way Sam`s cruise night at Mikes diner will start soon, (the old Mels diner at sheldon/99 ) you going its on Tuesday nights.... __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

04-11-2010, 02:33 PM	#12
GGinferno DiablosWeldingFabrication Join Date: Jun 2009 Location: Elverta ,CA Posts: 201	Re: My new interiror Nice! its right by the house to! ohhh yeah i will be thier for sure! The Seat is going to get done in a black vinyl with red tubbing and red stiching the center of the seat is going to be red aswell!

04-11-2010, 03:29 PM	#13
Shaky Six in a row makes it go... Join Date: Mar 2009 Location: Vacationland: Maine Posts: 1,346	Re: My new interiror Shift knob? __________________ 67 C20 long step resto: http://67-72chevytrucks.com/vboard/s...d.php?t=342086 66 C10 long step build: http://67-72chevytrucks.com/vboard/s...=1#post3814790 CT to Alaska in a 67 C10: http://67-72chevytrucks.com/vboard/s...d.php?t=399224 “The height of sophistication is simplicity." - Clare Boothe Luce

04-11-2010, 11:11 PM	#14
GGinferno DiablosWeldingFabrication Join Date: Jun 2009 Location: Elverta ,CA Posts: 201	Re: My new interiror Oooh yeaaah! the knob is on its way! chack it out! my wife is going to paint it as soon as it gets in! Attached Images

04-12-2010, 05:38 AM	#15
Shaky Six in a row makes it go... Join Date: Mar 2009 Location: Vacationland: Maine Posts: 1,346	Re: My new interiror Ah yes - I knew it was gonna be somethin' good! __________________ 67 C20 long step resto: http://67-72chevytrucks.com/vboard/s...d.php?t=342086 66 C10 long step build: http://67-72chevytrucks.com/vboard/s...=1#post3814790 CT to Alaska in a 67 C10: http://67-72chevytrucks.com/vboard/s...d.php?t=399224 “The height of sophistication is simplicity." - Clare Boothe Luce

04-12-2010, 08:03 AM	#16
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: My new interiror I like it! __________________ Scott 93 crew cab build Project 62



Register or Log In To remove these advertisements.

06-08-2010, 04:35 PM	#17
GGinferno DiablosWeldingFabrication Join Date: Jun 2009 Location: Elverta ,CA Posts: 201	Re: My new interiror Finally done with shifter knob! Attached Images

06-08-2010, 06:30 PM	#19
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: My new interiror Right on!! Looks cool GG. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

06-09-2010, 12:29 AM	#20
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: My new interiror nice work...that'll fit nicely into your color scheme

06-14-2010, 07:35 PM	#21
T-Bone Tommy Registered User Join Date: Feb 2009 Location: Greenwood S.C Posts: 12	Re: My new interiror Where did you get that knob????????

06-14-2010, 08:14 PM	#22
GGinferno DiablosWeldingFabrication Join Date: Jun 2009 Location: Elverta ,CA Posts: 201	Re: My new interiror Thanks guys! T-Bone i got from www.jimmyflintstonestudios.com only 15 Bucks! unpainted Last edited by GGinferno; 06-14-2010 at 08:15 PM.

Register or Log In To remove these advertisements.