Woody...Seat Info - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 05-25-2003, 06:59 PM

Woody I wanted to get this out to you before I forget. I have the set packed, so things are ready for later this week.

To make it sit flatter (seat does not normally fold completely flat), I took and loosened the back up. here are two shots, to give you an idea of what I did. You'll need a Torx socet for the bolt head. I forget what number, It's the standard one for all the new style seatbelts.

Picture 1 is passneger side of the seat. I took out the two bolts the arrows are point to. The one that goes into the upper seat hinge is taped to the side of the braket. I was afraid it would poke it. Also make not there is a little plastice sleeve/washer the isolates the top and bottom part of the seat.

I had taken the bottom bolt out, but you may not need to., it is mainly the catch bolt for the latch of the seatback.

**Palf70Step** · 05-25-2003, 07:02 PM

#2
This is drivers side. Again I took out the lower bolt, but you may not have to to get it back up. The top bolt is just loosened.

You may have delt with this before, but wanted to let you know. Belts are in labeled zip lock backs taped to the bottom of the seat.

05-25-2003, 06:59 PM	#1
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,974	Woody...Seat Info Woody I wanted to get this out to you before I forget. I have the set packed, so things are ready for later this week. To make it sit flatter (seat does not normally fold completely flat), I took and loosened the back up. here are two shots, to give you an idea of what I did. You'll need a Torx socet for the bolt head. I forget what number, It's the standard one for all the new style seatbelts. Picture 1 is passneger side of the seat. I took out the two bolts the arrows are point to. The one that goes into the upper seat hinge is taped to the side of the braket. I was afraid it would poke it. Also make not there is a little plastice sleeve/washer the isolates the top and bottom part of the seat. I had taken the bottom bolt out, but you may not need to., it is mainly the catch bolt for the latch of the seatback. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-25-2003, 07:02 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,974	#2 This is drivers side. Again I took out the lower bolt, but you may not have to to get it back up. The top bolt is just loosened. You may have delt with this before, but wanted to let you know. Belts are in labeled zip lock backs taped to the bottom of the seat. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.