VA a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

frednoah · 06-21-2010, 10:11 AM

Quote:

Originally Posted by billsbowtie

some driver shape mirrors & gaskets $22.00 shipped. or $15.00 picked up.

Do you have arms for these mirrors?

69step-side · 06-21-2010, 11:53 AM

I'm interested in post #36 the 68 chevy front fender. I can't see the picture on my computer what's the difference between the 68 and 69? Thanks.

billsbowtie · 06-21-2010, 01:51 PM

good used doors are hard to find. i have a pair or 2 that need work [rust at bottoms $75.00 for 1 pair and i will have to look 2nd pair over before i price them $100.00 to $150.00. i have a couple pass. side blazer doors rust in corners $40.00 each.

billsbowtie · 06-21-2010, 01:56 PM

fred i have 1 i will look to see if i have another if so $5.00 each for the arms.
69 step 67 & 68 fender will change out but 67 has no marker lights. 69 72 fenders are same. and 67/72 gmc will use 67/68 chevy fenders. i hope this helps.

frednoah · 06-21-2010, 01:58 PM

Quote:

Originally Posted by billsbowtie

fred i have 1 i will look to see if i have another if so $5.00 each for the arms.

If you find the arms, I'll take the complete setup for $32 shipped. Can do paypal or MO.

70BLAZERX2 · 06-21-2010, 03:26 PM

Quote:

Originally Posted by billsbowtie

good used doors are hard to find. i have a pair or 2 that need work [rust at bottoms $75.00 for 1 pair and i will have to look 2nd pair over before i price them $100.00 to $150.00. i have a couple pass. side blazer doors rust in corners $40.00 each.

I will take the blazer doors pending pics..pm sent ,thank you

ralphie628 · 06-21-2010, 06:19 PM

are the brackets on the utility buckets the same as the cst buckets? if so.. are you willing to seperate the brackets from the seats? thanks

69step-side · 06-21-2010, 06:26 PM

On posts #42 and 43 can you take some more pics to include the other side and top. Do they have dents, dings, rust? Are the brackets for the wood bed welded on the other side, if not do you have them.

Are you planning on being in Asheville on the 5th of July. I'm interested in them. Thanks.

bigguy69 · 06-21-2010, 10:22 PM

i would be interested in the power steering box. are you going to the mountneer(sp) car and truck show? my wife and i are going to be there. just let me know.

billsbowtie · 06-21-2010, 11:14 PM

fred i found 2 drivers side arms but no pass. side.
eric i will make a door tread little latter tonite. i have pic. of the truck doors but i will have to get blazer door pic.s tomarrow.
ralph they are drifferent i think.
69 stepside i will try to get some more pic. tues. i will in asheville july 1st &2nd.
big guy69 yes i will be there . if you can send payment i will bring it with me and we can meet so you can pick it up.

ralphie628 · 06-22-2010, 02:44 AM

Quote:

Originally Posted by billsbowtie

fred i found 2 drivers side arms but no pass. side.
eric i will make a door tread little latter tonite. i have pic. of the truck doors but i will have to get blazer door pic.s tomarrow.
ralph they are drifferent i think.
69 stepside i will try to get some more pic. tues. i will in asheville july 1st &2nd.
big guy69 yes i will be there . if you can send payment i will bring it with me and we can meet so you can pick it up.

can you measure the brackets? would you part them?

billsbowtie · 06-22-2010, 07:43 PM

69stepside here are a few more pic.s i hope you can tell what you need to know about them. i didn't see any dents or rust other than some surface rust. they are perty straight.

billsbowtie · 06-22-2010, 07:45 PM

69stepside wrong pic. above here are the right ones.

billsbowtie · 06-22-2010, 07:46 PM

billsbowtie · 06-22-2010, 07:47 PM

after looking at the pic.s they look like they may be a couple dings in them but they don't look bad. i didn't even notice them in person.

billsbowtie · 06-22-2010, 07:49 PM

ralph i will take $80.00 shipped for the seat brackets.

bigguy69 · 06-22-2010, 09:13 PM

Quote:

Originally Posted by billsbowtie

fred i found 2 drivers side arms but no pass. side.
eric i will make a door tread little latter tonite. i have pic. of the truck doors but i will have to get blazer door pic.s tomarrow.
ralph they are drifferent i think.
69 stepside i will try to get some more pic. tues. i will in asheville july 1st &2nd.
big guy69 yes i will be there . if you can send payment i will bring it with me and we can meet so you can pick it up.

would you happen to have any brackets for a long water pump? pm me an address i will send a money order is that okay?

billsbowtie · 06-22-2010, 09:28 PM

bigguy69 sending you a pm.

69step-side · 06-24-2010, 06:58 AM

On those bed sides I did not see the angle brackets for the wood bed welded to the bed panels. Are they missing or just removed from the bed? I'm not sure how difficult it is to weld them on but have read in this forum it's better to buy them with them on. What do you think?

billsbowtie · 06-24-2010, 10:40 AM

these brackets on each end are all theses have. i don't have anything else for these sides but 1 step & a pair of 67 fenders.

69step-side · 06-24-2010, 09:27 PM

Bump

billsbowtie · 06-24-2010, 09:54 PM

this power steering box in this tread is sold but i will have 1 or 2 more this week end same price.

06-21-2010, 11:53 AM	#127
69step-side Registered User Join Date: Nov 2009 Location: Beaufort, S.C. Posts: 17	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. I'm interested in post #36 the 68 chevy front fender. I can't see the picture on my computer what's the difference between the 68 and 69? Thanks.

06-21-2010, 01:51 PM	#128
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. good used doors are hard to find. i have a pair or 2 that need work [rust at bottoms $75.00 for 1 pair and i will have to look 2nd pair over before i price them $100.00 to $150.00. i have a couple pass. side blazer doors rust in corners $40.00 each. __________________ i have 67/72 chevy truck parts f/s.

06-21-2010, 01:56 PM	#129
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. fred i have 1 i will look to see if i have another if so $5.00 each for the arms. 69 step 67 & 68 fender will change out but 67 has no marker lights. 69 72 fenders are same. and 67/72 gmc will use 67/68 chevy fenders. i hope this helps. __________________ i have 67/72 chevy truck parts f/s.

06-21-2010, 06:19 PM	#132
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. are the brackets on the utility buckets the same as the cst buckets? if so.. are you willing to seperate the brackets from the seats? thanks

06-21-2010, 06:26 PM	#133
69step-side Registered User Join Date: Nov 2009 Location: Beaufort, S.C. Posts: 17	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. On posts #42 and 43 can you take some more pics to include the other side and top. Do they have dents, dings, rust? Are the brackets for the wood bed welded on the other side, if not do you have them. Are you planning on being in Asheville on the 5th of July. I'm interested in them. Thanks.

06-21-2010, 10:22 PM	#134
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. i would be interested in the power steering box. are you going to the mountneer(sp) car and truck show? my wife and i are going to be there. just let me know. __________________ members met: redbaron69, billsbowtie,nc67

06-21-2010, 11:14 PM	#135
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. fred i found 2 drivers side arms but no pass. side. eric i will make a door tread little latter tonite. i have pic. of the truck doors but i will have to get blazer door pic.s tomarrow. ralph they are drifferent i think. 69 stepside i will try to get some more pic. tues. i will in asheville july 1st &2nd. big guy69 yes i will be there . if you can send payment i will bring it with me and we can meet so you can pick it up. __________________ i have 67/72 chevy truck parts f/s.

06-22-2010, 07:43 PM	#137
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. 69stepside here are a few more pic.s i hope you can tell what you need to know about them. i didn't see any dents or rust other than some surface rust. they are perty straight. __________________ i have 67/72 chevy truck parts f/s.

06-22-2010, 07:45 PM	#138
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. 69stepside wrong pic. above here are the right ones. __________________ i have 67/72 chevy truck parts f/s.

06-22-2010, 07:46 PM	#139
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. __________________ i have 67/72 chevy truck parts f/s.

06-22-2010, 07:47 PM	#140
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. after looking at the pic.s they look like they may be a couple dings in them but they don't look bad. i didn't even notice them in person. __________________ i have 67/72 chevy truck parts f/s.

06-22-2010, 07:49 PM	#141
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. ralph i will take $80.00 shipped for the seat brackets. __________________ i have 67/72 chevy truck parts f/s.

06-22-2010, 09:28 PM	#143
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. bigguy69 sending you a pm. __________________ i have 67/72 chevy truck parts f/s.

06-24-2010, 06:58 AM	#144
69step-side Registered User Join Date: Nov 2009 Location: Beaufort, S.C. Posts: 17	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. On those bed sides I did not see the angle brackets for the wood bed welded to the bed panels. Are they missing or just removed from the bed? I'm not sure how difficult it is to weld them on but have read in this forum it's better to buy them with them on. What do you think?

06-24-2010, 10:40 AM	#145
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. these brackets on each end are all theses have. i don't have anything else for these sides but 1 step & a pair of 67 fenders. __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

06-24-2010, 09:27 PM	#146
69step-side Registered User Join Date: Nov 2009 Location: Beaufort, S.C. Posts: 17	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. Bump

06-24-2010, 09:54 PM	#147
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: a bunch of va. 67/72 parts that i can get to asheville nc in a couple weeks. this power steering box in this tread is sold but i will have 1 or 2 more this week end same price. __________________ i have 67/72 chevy truck parts f/s.

Register or Log In To remove these advertisements.