A Few Parts For the Inline 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stroker · 05-24-2003, 10:09 PM

6 cylinder HEI with Coil in Cap $35

3 Groove Crank Pulley
2 Double Waterpump Pulleys (these each have different spacing)
$20 for the 3 pulley set

All of these parts came with my 72 when I purchased it. Pulleys were added by the PO for PS and AC. If you would like Pics or PN let me know. Thanks ....Stroker

mikeoj · 05-24-2003, 11:38 PM

I could use the three groove crank pulley only.Please give price to 53012.Thanks Mike
Post or e-mail reply,mickoj07@aol.com

stelth2002 · 05-25-2003, 01:41 AM

How much for the water pump pulley? and could u post a pic? thanks

Stroker · 05-25-2003, 12:59 PM

mikeoj here's a pic of the crank pulley PN5972180 CE while I was cleaning it off to find a part number I noticed it is nicked and has a scratch running the around the edge of the aft groove. This pulley was on the truck and I never had a problem with it but if you are building for show it might not be for you. I have attached a close up of that area of the pulley. Shipping would run about $7.50-$8.00 based on 4lbs. If your interested $15 to your door.Thanks Stroker

Stroker · 05-25-2003, 01:00 PM

close up of crank pulley

Stroker · 05-25-2003, 01:09 PM

stelth2002 here are the two water pump pulleys the pulley with the narrower gap between the 2 grooves is 3927796 AE the pulley with the wider gap is 465933-DD. I have no clue as to what these pulleys are originally off of and don't remember which one was actually on the truck. $8.00 choice or $12 for the pair plus shipping. Thanks Stroker

mikeoj · 05-25-2003, 03:58 PM

Stoker,
Thanks for the pics,but the pulley i'm lookin for is a press fit castiron pulley.I thought,But could be wrong,that all 6cyl crank pulleys were press fit cast?Again thanks,but,i won't need.
Thanks Mike

Stroker · 05-25-2003, 08:52 PM

Mike you may be right, I've never dealt with the sixes. And there's no telling where these pulleys originally came from. I know I had to change the pwr steering pump on this truck and the bracket was a shimmed up mickeymouse mess. These pulleys may belong in the same place as the pwr steering and alt bracket went.LOL If anyone knows for sure let me know.Thanks...Stroker

**passthebuck** · 05-27-2003, 10:37 PM

hey stroker-i'll take the HEI-you'll have a PM in about 5 minutes...

Stroker · 05-28-2003, 12:02 AM

passthebuck sent you a PM.

05-24-2003, 10:09 PM	#1
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	A Few Parts For the Inline 6 6 cylinder HEI with Coil in Cap $35 3 Groove Crank Pulley 2 Double Waterpump Pulleys (these each have different spacing) $20 for the 3 pulley set All of these parts came with my 72 when I purchased it. Pulleys were added by the PO for PS and AC. If you would like Pics or PN let me know. Thanks ....Stroker __________________ 72 SWB parts and pieces Oklahoma

05-24-2003, 11:38 PM	#2
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	pulley I could use the three groove crank pulley only.Please give price to 53012.Thanks Mike Post or e-mail reply,mickoj07@aol.com __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc.

05-25-2003, 01:41 AM	#3
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	How much for the water pump pulley? and could u post a pic? thanks __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

05-25-2003, 12:59 PM	#4
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	mikeoj here's a pic of the crank pulley PN5972180 CE while I was cleaning it off to find a part number I noticed it is nicked and has a scratch running the around the edge of the aft groove. This pulley was on the truck and I never had a problem with it but if you are building for show it might not be for you. I have attached a close up of that area of the pulley. Shipping would run about $7.50-$8.00 based on 4lbs. If your interested $15 to your door.Thanks Stroker Attached Images __________________ 72 SWB parts and pieces Oklahoma

05-25-2003, 01:00 PM	#5
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	close up of crank pulley Attached Images __________________ 72 SWB parts and pieces Oklahoma

05-25-2003, 01:09 PM	#6
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	stelth2002 here are the two water pump pulleys the pulley with the narrower gap between the 2 grooves is 3927796 AE the pulley with the wider gap is 465933-DD. I have no clue as to what these pulleys are originally off of and don't remember which one was actually on the truck. $8.00 choice or $12 for the pair plus shipping. Thanks Stroker Attached Images __________________ 72 SWB parts and pieces Oklahoma

05-25-2003, 03:58 PM	#7
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	crank pulley Stoker, Thanks for the pics,but the pulley i'm lookin for is a press fit castiron pulley.I thought,But could be wrong,that all 6cyl crank pulleys were press fit cast?Again thanks,but,i won't need. Thanks Mike __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc.

05-25-2003, 08:52 PM	#8
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	Mike you may be right, I've never dealt with the sixes. And there's no telling where these pulleys originally came from. I know I had to change the pwr steering pump on this truck and the bracket was a shimmed up mickeymouse mess. These pulleys may belong in the same place as the pwr steering and alt bracket went.LOL If anyone knows for sure let me know.Thanks...Stroker __________________ 72 SWB parts and pieces Oklahoma

05-27-2003, 10:37 PM	#9
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	hey stroker-i'll take the HEI-you'll have a PM in about 5 minutes... __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

05-28-2003, 12:02 AM	#10
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	passthebuck sent you a PM. __________________ 72 SWB parts and pieces Oklahoma



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.