Which Tilt Column? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vandals909 · 06-26-2010, 08:16 PM

Who makes the best tilt column for these trucks?

Any of them better then another? Want on with a auto shifter on it.

blazin · 06-26-2010, 10:28 PM

i just bought and installed a flaming river, til,t stainless one with a floor shift,,, works great.

Quote:

Originally Posted by Vandals909

Who makes the best tilt column for these trucks?

Any of them better then another? Want on with a auto shifter on it.

**DPowers** · 06-26-2010, 11:40 PM

Contact Kevsclassics on this board

http://67-72chevytrucks.com/vboard/s...d.php?t=264748

C/10 King · 06-27-2010, 12:52 AM

Quote:

Originally Posted by DPowers

Contact Kevsclassics on this board

http://67-72chevytrucks.com/vboard/s...d.php?t=264748

X2

barryvanhook · 06-27-2010, 01:48 AM

Quote:

Originally Posted by blazin

i just bought and installed a flaming river, til,t stainless one with a floor shift,,, works great.

X2.

Barry

Vandals909 · 06-27-2010, 03:11 AM

Are his re-manufactored factory units or aftermarket? Are they a direct bolt in? Thank you

71swb4x4 · 06-27-2010, 09:55 AM

Quote:

Originally Posted by Vandals909

Are his re-manufactored factory units or aftermarket? Are they a direct bolt in? Thank you

Rebuilt factory. They are direct bolt in.

C/10 King · 06-27-2010, 12:43 PM

Here's Kevin's work.

....Need I say more?

He's the man.

Vandals909 · 06-27-2010, 12:54 PM

Look real nice.I'll have the PM him. Do you know if going with a tilt makes the column shorter or closer the dash? The wheel feels to close to me. I'am sure a smaller wheel would help to!

Longhorn Man · 06-27-2010, 04:19 PM

stock tilt puts the wheel at the same location. With a couple small mods, you can place it closer to the dash.

**KevsClassics** · 06-27-2010, 08:05 PM

Quote:

Originally Posted by DPowers

Contact Kevsclassics on this board

http://67-72chevytrucks.com/vboard/s...d.php?t=264748

Quote:

Originally Posted by 71swb4x4

Rebuilt factory. They are direct bolt in.

Quote:

Originally Posted by C/10 King

Here's Kevin's work.

....Need I say more?

He's the man.

Quote:

Originally Posted by Vandals909

Look real nice.I'll have the PM him. Do you know if going with a tilt makes the column shorter or closer the dash? The wheel feels to close to me. I'am sure a smaller wheel would help to!

Thanks guys for the recommendations. I really appreciate it. Gary yes I can accommodate your request.

Vandals909 · 06-27-2010, 11:41 PM

Can you PM me with some prices shipped?

**KevsClassics** · 06-28-2010, 12:51 AM

Quote:

Originally Posted by Vandals909

Can you PM me with some prices shipped?

PM sent

Vandals909 · 06-28-2010, 01:50 AM

C10 King are any of those in the picture you posted shortend columns? I would like to have the wheel a little further away from me.

The wheel I have on there now is a stock one, not sure of the size but would also like to switch to smaller wheel.

Just dont want to have the column to short either and to feel stretched out while driving either.

C/10 King · 06-28-2010, 10:06 AM

Quote:

Originally Posted by Vandals909

C10 King are any of those in the picture you posted shortend columns? I would like to have the wheel a little further away from me.

The wheel I have on there now is a stock one, not sure of the size but would also like to switch to smaller wheel.

Just dont want to have the column to short either and to feel stretched out while driving either.

Yeah, I know what you mean, I took the black one back to Kevin and had him sink it in, after I seen him do it to a friend of ours. I will take a picture and post it later today. It's really more comfortable this way, the cab feels so much bigger. It's amazing what a difference a inch to two inches can make.

C/10 King · 06-28-2010, 06:19 PM

Quote:

Originally Posted by Vandals909

C10 King are any of those in the picture you posted shortend columns? I would like to have the wheel a little further away from me.

The wheel I have on there now is a stock one, not sure of the size but would also like to switch to smaller wheel.

Just dont want to have the column to short either and to feel stretched out while driving either.

Okay, here you go, one sunken column, one Camaro wheel, one Raider thong, two Yosemite Sam floor mats and one "Martinez super service" hat, Also I forgot to mention the Budweiser neckless. Look at all room in the cab,I'm very comfortable and I have short arms. Good luck.

Vandals909 · 06-29-2010, 02:15 AM

C10/King how many inches was the one pictured shortened?

If it ends up feeling to short can I still make it longer later?

**KevsClassics** · 06-29-2010, 10:22 AM

Quote:

Originally Posted by Vandals909

C10/King how many inches was the one pictured shortened?

If it ends up feeling to short can I still make it longer later?

3" and Yes you can adj. where you feel best.

**Roland** · 07-01-2010, 12:52 PM

Hi Kev,

I have a factory tilt in a '72 Highlander. The truck has a 350/350 combination and I want to install a '99 LS1 with a 4L60E trans. Can you rebuild the column to handle this and shorten it about 1.5" ? Would your rebuild include lighted indicator, etc.? Also, can you give a price for this?

I tried to P/M you but guess it didn't work.

Thanks

06-26-2010, 08:16 PM	#1
Vandals909 Registered User Join Date: Sep 2005 Location: So. Cal Posts: 321	Which Tilt Column? Who makes the best tilt column for these trucks? Any of them better then another? Want on with a auto shifter on it.

06-26-2010, 11:40 PM	#3
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: Which Tilt Column? Contact Kevsclassics on this board http://67-72chevytrucks.com/vboard/s...d.php?t=264748 __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556 Last edited by DPowers; 06-26-2010 at 11:41 PM.

06-27-2010, 03:11 AM	#6
Vandals909 Registered User Join Date: Sep 2005 Location: So. Cal Posts: 321	Re: Which Tilt Column? Are his re-manufactored factory units or aftermarket? Are they a direct bolt in? Thank you

06-27-2010, 12:43 PM	#8
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: Which Tilt Column? Here's Kevin's work. ....Need I say more? He's the man. __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"

06-27-2010, 12:54 PM	#9
Vandals909 Registered User Join Date: Sep 2005 Location: So. Cal Posts: 321	Re: Which Tilt Column? Look real nice.I'll have the PM him. Do you know if going with a tilt makes the column shorter or closer the dash? The wheel feels to close to me. I'am sure a smaller wheel would help to!

06-27-2010, 04:19 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Which Tilt Column? stock tilt puts the wheel at the same location. With a couple small mods, you can place it closer to the dash.

06-27-2010, 11:41 PM	#12
Vandals909 Registered User Join Date: Sep 2005 Location: So. Cal Posts: 321	Re: Which Tilt Column? Can you PM me with some prices shipped?

06-28-2010, 01:50 AM	#14
Vandals909 Registered User Join Date: Sep 2005 Location: So. Cal Posts: 321	Re: Which Tilt Column? C10 King are any of those in the picture you posted shortend columns? I would like to have the wheel a little further away from me. The wheel I have on there now is a stock one, not sure of the size but would also like to switch to smaller wheel. Just dont want to have the column to short either and to feel stretched out while driving either.

06-29-2010, 02:15 AM	#17
Vandals909 Registered User Join Date: Sep 2005 Location: So. Cal Posts: 321	Re: Which Tilt Column? C10/King how many inches was the one pictured shortened? If it ends up feeling to short can I still make it longer later?

07-01-2010, 12:52 PM	#19
Roland Junior Member Join Date: Nov 2006 Location: Brandon, MS Posts: 134	Re: Which Tilt Column? Hi Kev, I have a factory tilt in a '72 Highlander. The truck has a 350/350 combination and I want to install a '99 LS1 with a 4L60E trans. Can you rebuild the column to handle this and shorten it about 1.5" ? Would your rebuild include lighted indicator, etc.? Also, can you give a price for this? I tried to P/M you but guess it didn't work. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.