anybody done a 4/4 drop? Pics? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

swb85 · 07-01-2010, 12:22 PM

I've seen lots of pics of 2/4, 3/4, 3/5, 4/6 drops.....but I like the factory raked stance and just want to bring it straight down a little bit. I run 28" tall tires on factory ralleys all around and think it would look good with shackles/hangers out back and 2.5" spindles up front, then cut the front springs down for that last 1"-1.5". Anybody got any pics of a 4/4 drop?

Low87 · 07-01-2010, 01:32 PM

My first drop was 4/6, which is pretty common. Just picture that with the ass up a bit. I'm not a fan of cutting coils though.

pig rig · 07-01-2010, 10:55 PM

my crew cab has a 4/4 drop with 29" tires

flamingbig10 · 07-01-2010, 11:22 PM

little more than 4/4 but on a 27 and 28 tall tire

07-01-2010, 12:22 PM	#1
swb85 On a budget like Fred Sanford Join Date: Oct 2005 Location: Topeka, KS Posts: 2,031	anybody done a 4/4 drop? Pics? I've seen lots of pics of 2/4, 3/4, 3/5, 4/6 drops.....but I like the factory raked stance and just want to bring it straight down a little bit. I run 28" tall tires on factory ralleys all around and think it would look good with shackles/hangers out back and 2.5" spindles up front, then cut the front springs down for that last 1"-1.5". Anybody got any pics of a 4/4 drop? __________________ '85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread '98 Camaro z28: 370ci twin turbo 370ci build '01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD

07-01-2010, 01:32 PM	#2
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	Re: anybody done a 4/4 drop? Pics? My first drop was 4/6, which is pretty common. Just picture that with the ass up a bit. I'm not a fan of cutting coils though. __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

07-01-2010, 10:55 PM	#3
pig rig Registered User Join Date: Feb 2009 Location: washington the state Posts: 730	Re: anybody done a 4/4 drop? Pics? my crew cab has a 4/4 drop with 29" tires __________________ my sports car rolls on six wheels only because I'm to fat to get in and out of new corvette http://hubgarage.s3.amazonaws.com/ph...ped_detail.JPG

07-01-2010, 11:22 PM	#4
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: anybody done a 4/4 drop? Pics? little more than 4/4 but on a 27 and 28 tall tire __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.