MN GAUGES! tach, vac, air - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 06-11-2010, 07:45 PM

Work is slow so i am going through some things. Who knows what will turn up next?
Cluster 1 (stock 5 gauge) is one of the nicest originals i have seen. There is some chrome missing around some of the bezel, but very respectable yet. I don't see any rust anywhere. Printed circuit looks nice yet. $90 shipped in the lower 48

Cluster 2 (air setup) The bezel is decent, but the chrome is pretty well gone. Kind of a rare set up. The backing plate for air/oil has been bent and straightened and shouldn't affect anything. PC looks good. The air needle isn't quite on zero, but i didn't want to adjust or break anything. This has a pickup gas gauge in it. Overall looks decent. $80 shipped in the lower 48.

Last one, (tach/vac) has not been gone through. The rear tin has been blasted and redone. You can still barely see the 8 cyl mark. The needle bounces freely. The vac gauge is discolored and the printed circuit probably needs replaced. Just figure it will need a resto. Looks like someone has a red mark on the lens for a "redline" with paint. $225 shipped in the lower 48.

I have not had these hooked up to anything and have tried to disclose any problems i can see. Eric

**too much stuff** · 06-11-2010, 07:50 PM

Tach pics...

19stepSide72 · 06-11-2010, 08:39 PM

intersted in tach dash

Arrington01 · 06-11-2010, 08:40 PM

I am interested in the Vac Tach Dash, how much for shipping to 79007 Texas. Thanks

frednoah · 06-11-2010, 09:41 PM

Interested in the stock 5 gauge setup. Do you have any idea if they all work?

**too much stuff** · 06-11-2010, 09:46 PM

These prices are shipped parcel post in the lower 48. 19stepside72 is up first on the tach dash, arrington01 is up after him.
Frednoah, i have not had these hooked up, but see no reason why they wouldn't work. The speedo head moves smooth when spun by hand. Everything about this unit is nice. Could be actual miles judging by the shape. Eric

frednoah · 06-11-2010, 10:19 PM

Going to pass for now. If I can get my brakes taken care of this weekend, I might hop back in line if still available.

scoyote · 06-11-2010, 10:44 PM

oops...never mind

spudly · 06-11-2010, 11:19 PM

I'll jump in line for the tach/vac dash.

19stepSide72 · 06-12-2010, 03:37 AM

I will pass, I have two but wanted to hoard another.

JUNKY · 06-12-2010, 05:30 AM

I'll take tach dash,,if it gets to me.
thanks TOM

VA72C10 · 06-12-2010, 08:15 AM

Interested in selling just the air pressure tin? I have a good air pressure gauge...

Arrington01 · 06-12-2010, 08:37 AM

Too Much Stuff let me know payment details.

**rockc** · 06-12-2010, 09:19 AM

put me in line for vac and also tach clusters

**too much stuff** · 06-13-2010, 10:10 AM

Tach cluster pending.
VA72, pm sent.

VA72C10 · 06-13-2010, 12:13 PM

I'll take the air pressure one. Pm replied for payment....

MontanaPete1 · 06-13-2010, 12:17 PM

Price for Cluster #1 Shipped to 59801? Thanks Pete

**too much stuff** · 06-13-2010, 12:36 PM

Quote:

Originally Posted by MontanaPete1

Price for Cluster #1 Shipped to 59801? Thanks Pete

That price is shipped. Eric

**too much stuff** · 06-14-2010, 08:52 PM

Tach/vac is gone
Air gauge setup is gone also.
Lets try $85 shipped on the last cluster.

**too much stuff** · 06-17-2010, 04:37 PM

last try, $80 on cluster 1.

Jackal2k9 · 07-02-2010, 12:39 AM

Is this cluster sold?

Thanks,
Tanner

**too much stuff** · 07-02-2010, 05:17 PM

These are all sold. What exactly are you looking for? I may have something else. Eric

Jackal2k9 · 07-02-2010, 10:36 PM

I've got a 5 guage cluster, but some don't work and I dont have an oil pressure guage in it... I'm kinda scrappin together stuff at the moment. Trying to find a nice working factory gauge set.

If I don't make sense, blame it on my ex-fiancee. I used to be sane.

Thanks,
Tanner

06-11-2010, 07:50 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: GAUGES! tach, vac, air Tach pics... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-11-2010, 08:39 PM	#3
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: GAUGES! tach, vac, air intersted in tach dash

06-11-2010, 08:40 PM	#4
Arrington01 Registered User Join Date: Feb 2008 Location: Texas Posts: 1,014	Re: GAUGES! tach, vac, air I am interested in the Vac Tach Dash, how much for shipping to 79007 Texas. Thanks

06-11-2010, 09:41 PM	#5
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: GAUGES! tach, vac, air Interested in the stock 5 gauge setup. Do you have any idea if they all work?

06-11-2010, 09:46 PM	#6
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: GAUGES! tach, vac, air These prices are shipped parcel post in the lower 48. 19stepside72 is up first on the tach dash, arrington01 is up after him. Frednoah, i have not had these hooked up, but see no reason why they wouldn't work. The speedo head moves smooth when spun by hand. Everything about this unit is nice. Could be actual miles judging by the shape. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-11-2010, 07:45 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	GAUGES! tach, vac, air Work is slow so i am going through some things. Who knows what will turn up next? Cluster 1 (stock 5 gauge) is one of the nicest originals i have seen. There is some chrome missing around some of the bezel, but very respectable yet. I don't see any rust anywhere. Printed circuit looks nice yet. $90 shipped in the lower 48 Cluster 2 (air setup) The bezel is decent, but the chrome is pretty well gone. Kind of a rare set up. The backing plate for air/oil has been bent and straightened and shouldn't affect anything. PC looks good. The air needle isn't quite on zero, but i didn't want to adjust or break anything. This has a pickup gas gauge in it. Overall looks decent. $80 shipped in the lower 48. Last one, (tach/vac) has not been gone through. The rear tin has been blasted and redone. You can still barely see the 8 cyl mark. The needle bounces freely. The vac gauge is discolored and the printed circuit probably needs replaced. Just figure it will need a resto. Looks like someone has a red mark on the lens for a "redline" with paint. $225 shipped in the lower 48. I have not had these hooked up to anything and have tried to disclose any problems i can see. Eric Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-11-2010, 10:19 PM	#7
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: GAUGES! tach, vac, air Going to pass for now. If I can get my brakes taken care of this weekend, I might hop back in line if still available.

06-11-2010, 10:44 PM	#8
scoyote Registered User Join Date: Oct 2008 Location: On the shores of Bull Shoals, AR Posts: 509	Re: GAUGES! tach, vac, air oops...never mind __________________ 1972 Blazer - Bronco Orange - In the werks http://67-72chevytrucks.com/vboard/s...d.php?t=323444 1991 F250 - Hunting truck w/ Detroit rear locker, ARB front locker, front and rear winches .... and more.... 1997 Grand Cherokee - fun jeep - Detroit rear locker, ARB front locker, front winch, 411 gears, lots of lights ;-) 2004 Hot Rod DuraMax - Dnyo'd at the wheels with 525 HP and 1100 lbs torque.....mustang killer. Last edited by scoyote; 06-11-2010 at 10:46 PM.

06-11-2010, 11:19 PM	#9
spudly Registered User Join Date: Dec 2007 Location: Newark, CA Posts: 127	Re: GAUGES! tach, vac, air I'll jump in line for the tach/vac dash.

06-12-2010, 03:37 AM	#10
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: GAUGES! tach, vac, air I will pass, I have two but wanted to hoard another.

06-12-2010, 05:30 AM	#11
JUNKY Registered User Join Date: May 2009 Location: Manalapan N.J. Posts: 107	Re: GAUGES! tach, vac, air I'll take tach dash,,if it gets to me. thanks TOM

06-12-2010, 08:15 AM	#12
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: GAUGES! tach, vac, air Interested in selling just the air pressure tin? I have a good air pressure gauge... __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-12-2010, 08:37 AM	#13
Arrington01 Registered User Join Date: Feb 2008 Location: Texas Posts: 1,014	Re: GAUGES! tach, vac, air Too Much Stuff let me know payment details.

06-12-2010, 09:19 AM	#14
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 640	Re: GAUGES! tach, vac, air put me in line for vac and also tach clusters __________________ 72 chevy 3/4 ton 4X4

06-13-2010, 10:10 AM	#15
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: GAUGES! tach, vac, air Tach cluster pending. VA72, pm sent. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

06-13-2010, 12:13 PM	#16
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: GAUGES! tach, vac, air I'll take the air pressure one. Pm replied for payment.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-13-2010, 12:17 PM	#17
MontanaPete1 Registered User Join Date: Aug 2009 Location: Missoula, MT Posts: 47	Re: GAUGES! tach, vac, air Price for Cluster #1 Shipped to 59801? Thanks Pete __________________ "Drive it like you stole it!"

06-14-2010, 08:52 PM	#19
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: GAUGES! tach, vac, air Tach/vac is gone Air gauge setup is gone also. Lets try $85 shipped on the last cluster. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-17-2010, 04:37 PM	#20
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: GAUGES! tach, vac, air last try, $80 on cluster 1. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-02-2010, 12:39 AM	#21
Jackal2k9 Registered User Join Date: Apr 2002 Location: Katy, Texas Posts: 171	Re: GAUGES! tach, vac, air Is this cluster sold? Thanks, Tanner

07-02-2010, 05:17 PM	#22
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: GAUGES! tach, vac, air These are all sold. What exactly are you looking for? I may have something else. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-02-2010, 10:36 PM	#23
Jackal2k9 Registered User Join Date: Apr 2002 Location: Katy, Texas Posts: 171	Re: GAUGES! tach, vac, air I've got a 5 guage cluster, but some don't work and I dont have an oil pressure guage in it... I'm kinda scrappin together stuff at the moment. Trying to find a nice working factory gauge set. If I don't make sense, blame it on my ex-fiancee. I used to be sane. Thanks, Tanner

Register or Log In To remove these advertisements.