My Crewcab Shortbed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Stitch* · 07-06-2010, 07:49 AM

Quote:

Originally Posted by Walts_restoration

88-91 HD rotors (6 lug) and then do the 6x5.5 Full floater conversion on the rear

They are bolt in hubs that change the bolt pattern from 8x6.5 to 6x5.5

Just wondering why I would want to do this. I'm open to suggestions. Just don't understand the reason behind it. It's already 8 lug and I already have wheels and tires to fit the 8 lugs. I'm not trying to be a smart a$$. Just wondering why

RandyP · 07-06-2010, 08:19 AM

A full week off? You should not have any issues at all then having it on the road by Sunday.

Anxious to see how you go on some stuff. Watch out for the snowball effect. Might as well go ahead and yank that cab off now.

*Stitch* · 07-06-2010, 08:35 AM

Here's the pics of what I did yesterday

RandyP · 07-06-2010, 09:26 AM

What color(s) are you thinking of? I look at that and it screams "paint me yellow and white". Tough but sensitive. Then again, can't go wrong with red.

Walts_restoration · 07-06-2010, 11:59 AM

Quote:

Originally Posted by Fat Hoe

Just wondering why I would want to do this. I'm open to suggestions. Just don't understand the reason behind it. It's already 8 lug and I already have wheels and tires to fit the 8 lugs. I'm not trying to be a smart a$$. Just wondering why

Thought i read in an earlier post that you had the halfton suspension and all and were thinking about it, although you planned to use this truck for towrig duties, and i figured this is just a way to keep the 14bff and use a halfton lug pattern.

*Stitch* · 07-06-2010, 12:34 PM

So I stripped the inside of the cab. I'm gonna be painting the dash maybe the top of the back wall. I'm also gonna be putting down some sound deafener in the cab floor so I figured I'd get it all cleaned up. To say this crewcab was a work truck is an understatement. It was SOOO dirty inside. It looked kinda dirty but I had no idea until I stripped the cab. These first couple of pics are right after I stripped it and cleaned it out AND I had already vacuumed it out. Nasty

*Stitch* · 07-06-2010, 12:41 PM

The really dark spots are surface rust and caked up dirt. I took some Lysol and a brush and then some clean wet rag to rinse it off and here's the results. I'm gonna have to wire brush the drivers floor board. I didn't clean it all that well because I'm gonna have to do some work there anyways. Enjoy the pics of my CLEAN cab

07-06-2010, 08:19 AM	#2
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: My Crewcab Shortbed A full week off? You should not have any issues at all then having it on the road by Sunday. Anxious to see how you go on some stuff. Watch out for the snowball effect. Might as well go ahead and yank that cab off now.

07-06-2010, 08:35 AM	#3
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crewcab Shortbed Here's the pics of what I did yesterday

07-06-2010, 09:26 AM	#4
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: My Crewcab Shortbed What color(s) are you thinking of? I look at that and it screams "paint me yellow and white". Tough but sensitive. Then again, can't go wrong with red.

07-06-2010, 12:34 PM	#6
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crewcab Shortbed So I stripped the inside of the cab. I'm gonna be painting the dash maybe the top of the back wall. I'm also gonna be putting down some sound deafener in the cab floor so I figured I'd get it all cleaned up. To say this crewcab was a work truck is an understatement. It was SOOO dirty inside. It looked kinda dirty but I had no idea until I stripped the cab. These first couple of pics are right after I stripped it and cleaned it out AND I had already vacuumed it out. Nasty

07-06-2010, 12:41 PM	#7
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crewcab Shortbed The really dark spots are surface rust and caked up dirt. I took some Lysol and a brush and then some clean wet rag to rinse it off and here's the results. I'm gonna have to wire brush the drivers floor board. I didn't clean it all that well because I'm gonna have to do some work there anyways. Enjoy the pics of my CLEAN cab Last edited by Stitch; 07-06-2010 at 12:42 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.