NP205 swap ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70blazer · 05-28-2003, 01:34 AM

The friend I sold my 70 blazer to is swapping out the spicer 20 t-case with a np205 out of a 72 chevy. He said it is too tall. Do you need to replace the crossmember as well as the hump in the floor or just the crossmember. Please help?

Blazer1970 · 05-28-2003, 08:04 AM

The hump is the same except for the shifter hole. IIRC, it is behind the hump where it hits the floor pan anyway. Trucks with a 205 used a crossmember with an inch or so more drop. The 205 is very close to the floor pan when installed, even with the correct cross member.

70blazer · 05-29-2003, 01:17 AM

Thank you for the reply, that helps alot.

05-28-2003, 01:34 AM	#1
70blazer Registered User Join Date: Jul 2002 Location: Utah Posts: 239	NP205 swap ? The friend I sold my 70 blazer to is swapping out the spicer 20 t-case with a np205 out of a 72 chevy. He said it is too tall. Do you need to replace the crossmember as well as the hump in the floor or just the crossmember. Please help? __________________ 1967 Suburban, my kids call it the SuburBEAN cuz its long and green.

05-28-2003, 08:04 AM	#2
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,510	The hump is the same except for the shifter hole. IIRC, it is behind the hump where it hits the floor pan anyway. Trucks with a 205 used a crossmember with an inch or so more drop. The 205 is very close to the floor pan when installed, even with the correct cross member. __________________ Tim

05-29-2003, 01:17 AM	#3
70blazer Registered User Join Date: Jul 2002 Location: Utah Posts: 239	Thanks Thank you for the reply, that helps alot. __________________ 1967 Suburban, my kids call it the SuburBEAN cuz its long and green.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.