TX New CPP Motor Perches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Clyde65** · 11-06-2009, 11:11 AM

I have a set of Motor perches for 63-72 chevy truck, they are from CPP, will fit all 63-72 Chevy trucks for small block or LS engines. I paid $129.00 plus shipping, I cant use them, make a reasonable offer with shipping. Thanks guys.

Clyde65

Bamm · 11-06-2009, 12:52 PM

I'm interested, but policy says you have to post a price. Sorry. Let me know what your $$$$$ is. Thanks, ......Jerry

Bamm · 11-09-2009, 01:05 AM

Hey Clyde, still interested, these still for sale? Thanks, .....Jerry

**thelonerife** · 11-09-2009, 01:10 AM

i just have a question. not getting in line right now. Why is it that you can't use them ? Is it a header or clearance issue?

**Clyde65** · 11-13-2009, 03:27 PM

Yes these are still available, I would like $100.00 plus shipping

THese would not work cuz of the headers I wanted to use and the fact that I had to clearance the top of my frame so the OTHER perches I bought would fit. THere is nothing wrong with these dudes, I just didnt like the way they set the motor further up so things would line up the way I planned.

Clyde65

Bamm · 11-13-2009, 03:29 PM

Thanks Clyde, but I'll pass for now.

**Clyde65** · 11-13-2009, 03:29 PM

I posted a reply regarding the motor perches, sorry, havent been near a computer recently. $100.00 plus shipping or make me an offer.

chapster · 11-13-2009, 04:05 PM

Clyde,

What headers gave you clearance issues with these perches?

Thanks

**Clyde65** · 11-13-2009, 05:06 PM

I didnt like how these put the motor more forward, they would have worked fine moving it forward if I would have used a pusher fan or the stock 5.3 fan. I went with a dual puller fan which needed three and one half inches clearance to install. THey would have worked I guess with headers, but when I tried the stock manifolds, they didnt work, then the whole fan clearance did them in for my needs.

meathead95 · 11-13-2009, 09:47 PM

got a pic?

Alan's Classic · 02-17-2010, 09:13 PM

My truck is a 65 C-10. I bought CPP's tubular engine perches and having a heck of a time finding shorty headers that will fit. I've tried Flowtech 31504FLT, Hooker 2466-1HKR and a set of used (name unknown) long tubes.

Hookers. The tube is hitting the frame, but even if it cleared it would be on top of the perch.

Long tubes brand unknown

This is the Flowtech. They clear the perches, but are way into the frame. Clearancing didn't even work. The rt side fit good the drivers side wasn't even close.

Has any body found shorty headers or any headers that will work with this setup? Any advice would be helpful. I wrote CPPJeff to see if he has a solution. I'm almost to the point of modifying the flowtechs to work and have them recoated, but that is still expensive. I've even thought about going back to the factory perches.

**Hart_Rod** · 02-18-2010, 09:49 AM

Quote:

Originally Posted by Alan's Classic

My truck is a 65 C-10. I bought CPP's tubular engine perches and having a heck of a time finding shorty headers that will fit. I've tried Flowtech 31504FLT, Hooker 2466-1HKR and a set of used (name unknown) long tubes.

Hookers. The tube is hitting the frame, but even if it cleared it would be on top of the perch.

This is the Flowtech. They clear the perches, but are way into the frame. Clearancing didn't even work. The rt side fit good the drivers side wasn't even close.

Has any body found shorty headers or any headers that will work with this setup? Any advice would be helpful. I wrote CPPJeff to see if he has a solution. I'm almost to the point of modifying the flowtechs to work and have them recoated, but that is still expensive. I've even thought about going back to the factory perches.

Have you looked into a set of Doug Thorley Headers?

R/

**Clyde65** · 02-18-2010, 11:21 AM

Try Sanderson shortie, CSLS1. I have them and they fit perfectly, I didnt use the CPP perches though, I used ones from POL, here is the link

http://www.performanceonline.com/sto...cat=455&page=1

coast2coast · 02-18-2010, 12:39 PM

Quote:

Originally Posted by Clyde65

Try Sanderson shortie, CSLS1. I have them and they fit perfectly, I didnt use the CPP perches though, I used ones from POL, here is the link

http://www.performanceonline.com/sto...cat=455&page=1

CSLS1 is for an LS engine. Alan's classic looks like he is running a gen1.
I would also like to know which header will work with the gen1.

Alan's Classic · 02-18-2010, 12:49 PM

Thanks guys for the info. Mine is a Gen1.

Here is a quote from CPPJeff. I will be looking into these. If anyone else has used these let us know please.

Quote:

Here you go bro hedman shorty part # 69646
hedman full length # is 69096
doug thorley # 3004
This should help you stop pulling your hair out!

**Clyde65** · 06-08-2010, 06:16 PM

still for sale 75.00

They look just like the ones on Alan's Classic pictures but are light grey in color

**Clyde65** · 06-11-2010, 03:35 PM

ttt

**GR8-68** · 07-08-2010, 09:31 PM

you sell these yet?

**Clyde65** · 07-09-2010, 10:01 AM

Yes they are sold. Sorry for not posting.

11-06-2009, 11:11 AM	#1
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	New CPP Motor Perches I have a set of Motor perches for 63-72 chevy truck, they are from CPP, will fit all 63-72 Chevy trucks for small block or LS engines. I paid $129.00 plus shipping, I cant use them, make a reasonable offer with shipping. Thanks guys. Clyde65 __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

11-06-2009, 12:52 PM	#2
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Re: New CPP Motor Perches I'm interested, but policy says you have to post a price. Sorry. Let me know what your $$$$$ is. Thanks, ......Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

11-09-2009, 01:05 AM	#3
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Re: New CPP Motor Perches Hey Clyde, still interested, these still for sale? Thanks, .....Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

11-09-2009, 01:10 AM	#4
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: New CPP Motor Perches i just have a question. not getting in line right now. Why is it that you can't use them ? Is it a header or clearance issue? __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-13-2009, 03:27 PM	#5
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: New CPP Motor Perches Yes these are still available, I would like $100.00 plus shipping THese would not work cuz of the headers I wanted to use and the fact that I had to clearance the top of my frame so the OTHER perches I bought would fit. THere is nothing wrong with these dudes, I just didnt like the way they set the motor further up so things would line up the way I planned. Clyde65 __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 11-13-2009 at 03:28 PM. Reason: Put price on them

11-13-2009, 03:29 PM	#6
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Re: New CPP Motor Perches Thanks Clyde, but I'll pass for now. __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

11-13-2009, 03:29 PM	#7
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: New CPP Motor Perches I posted a reply regarding the motor perches, sorry, havent been near a computer recently. $100.00 plus shipping or make me an offer. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

11-13-2009, 04:05 PM	#8
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: New CPP Motor Perches Clyde, What headers gave you clearance issues with these perches? Thanks

11-13-2009, 05:06 PM	#9
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: New CPP Motor Perches I didnt like how these put the motor more forward, they would have worked fine moving it forward if I would have used a pusher fan or the stock 5.3 fan. I went with a dual puller fan which needed three and one half inches clearance to install. THey would have worked I guess with headers, but when I tried the stock manifolds, they didnt work, then the whole fan clearance did them in for my needs. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

11-13-2009, 09:47 PM	#10
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: New CPP Motor Perches got a pic? __________________ 72 2wd blazer 72 swb 4x4

02-17-2010, 09:13 PM	#11
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: New CPP Motor Perches My truck is a 65 C-10. I bought CPP's tubular engine perches and having a heck of a time finding shorty headers that will fit. I've tried Flowtech 31504FLT, Hooker 2466-1HKR and a set of used (name unknown) long tubes. Hookers. The tube is hitting the frame, but even if it cleared it would be on top of the perch. Long tubes brand unknown This is the Flowtech. They clear the perches, but are way into the frame. Clearancing didn't even work. The rt side fit good the drivers side wasn't even close. Has any body found shorty headers or any headers that will work with this setup? Any advice would be helpful. I wrote CPPJeff to see if he has a solution. I'm almost to the point of modifying the flowtechs to work and have them recoated, but that is still expensive. I've even thought about going back to the factory perches. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

02-18-2010, 11:21 AM	#13
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: New CPP Motor Perches Try Sanderson shortie, CSLS1. I have them and they fit perfectly, I didnt use the CPP perches though, I used ones from POL, here is the link http://www.performanceonline.com/sto...cat=455&page=1 __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

06-08-2010, 06:16 PM	#16
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: New CPP Motor Perches still for sale 75.00 They look just like the ones on Alan's Classic pictures but are light grey in color __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 06-11-2010 at 03:39 PM.

06-11-2010, 03:35 PM	#17
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: New CPP Motor Perches ttt __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

07-08-2010, 09:31 PM	#18
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: New CPP Motor Perches you sell these yet?



Register or Log In To remove these advertisements.

07-09-2010, 10:01 AM	#19
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: New CPP Motor Perches Yes they are sold. Sorry for not posting. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

Register or Log In To remove these advertisements.