And faster we shall go.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Super73 · 06-29-2010, 05:09 PM

Well I got a phone call from a friend of mine with some bad news. I tuned his F-body a while ago which had a stock motor in it with a rear mount 60mil turbo. We tuned it for 5lbs of boost and it made a decent 430rwhp. Well, the turbo had an issue and next thing you know, he bought a 70mil. After installing it, he did not turn down the boost controller and it went to 15lbs. The motor said

He was looking to buy my shortblock out of my Camaro which is biult to spin to 8,200rpm and handle 30lbs of boost. Struck a deal.

Left with no motor for the Camaro, I decided the truck motor would go great in it for a while and would have no problem holding about 10lbs of boost with the larger chamber AFR heads. This will give me plenty of seat time in it at a lower power level once the project actually moves. This now leaves me with no motor for my truck (well, not really, but I'm trying to convince myself of that).

So today I ordered up a new shortblock. A nice little alum 418 LS3 that will be set up to handle a 400-500hp hit of N20. I'm thinking stepping up 70ci should get me in the 10's fairly comfortably since I knew there was still a couple tenths on the table with my current 347. Will run it that way for a while, get it working well then step up to some spray.

I'm excited

team39763 · 06-29-2010, 06:53 PM

My goodness. What all is done to handle that big of a shot? It can't be your average forged shortblock.

Marv D · 06-29-2010, 08:00 PM

Ohhhh your greedy greedy greedy arent you. a 400Hp shot on a LS3!! NOW we get to find out how your chassis tunning skills hone out don't we!!! (LOL)

bigsnookmaster · 06-29-2010, 08:37 PM

Get ready to smile REAL BIG !!!!

Super73 · 06-30-2010, 02:55 AM

I supose we will Marv.. In due time

I probably won't have much time to do anything for the next 6 months though with school.. Maybe some motor TNT'ing but that's about it.

On another note, I was comparing my mph against a buddies 4th gen F-body. He makes 415ish and I make 450ish. 1/8 mile I had him by 3mph, the 1/4 he had me 3mph (so he gained 6mph more than I). Both are autos.. Dam brick walls we race

Marv D · 07-02-2010, 10:25 AM

LOL, yeah I had a guy who builds cars tell me I should cut the 'visor' portion of the roof off and lay it back so air could slip over the windshield / roof. I couldn't help but laugh,, so what would we do about that frontal area above the bumper!! LOL. About a aerodynamic as an apartment complex!!

dbmx66 · 07-15-2010, 12:26 AM

i see a twisted chassis in the future

06-29-2010, 05:09 PM	#1
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	And faster we shall go.. Well I got a phone call from a friend of mine with some bad news. I tuned his F-body a while ago which had a stock motor in it with a rear mount 60mil turbo. We tuned it for 5lbs of boost and it made a decent 430rwhp. Well, the turbo had an issue and next thing you know, he bought a 70mil. After installing it, he did not turn down the boost controller and it went to 15lbs. The motor said He was looking to buy my shortblock out of my Camaro which is biult to spin to 8,200rpm and handle 30lbs of boost. Struck a deal. Left with no motor for the Camaro, I decided the truck motor would go great in it for a while and would have no problem holding about 10lbs of boost with the larger chamber AFR heads. This will give me plenty of seat time in it at a lower power level once the project actually moves. This now leaves me with no motor for my truck (well, not really, but I'm trying to convince myself of that). So today I ordered up a new shortblock. A nice little alum 418 LS3 that will be set up to handle a 400-500hp hit of N20. I'm thinking stepping up 70ci should get me in the 10's fairly comfortably since I knew there was still a couple tenths on the table with my current 347. Will run it that way for a while, get it working well then step up to some spray. I'm excited __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49 Last edited by Super73; 06-29-2010 at 05:11 PM.

06-29-2010, 06:53 PM	#2
team39763 Registered User Join Date: Feb 2007 Location: Texas Posts: 469	Re: And faster we shall go.. My goodness. What all is done to handle that big of a shot? It can't be your average forged shortblock. __________________ 1982 Silverado - SBE, cleaned up GM heads, small cam, TH350, 850 Demon, 4.56 gears, and caltracs. Best time so far 11.8@XXXMPH

06-29-2010, 08:00 PM	#3
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: And faster we shall go.. Ohhhh your greedy greedy greedy arent you. a 400Hp shot on a LS3!! NOW we get to find out how your chassis tunning skills hone out don't we!!! (LOL) __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral. Last edited by Super73; 06-30-2010 at 02:54 AM.

06-29-2010, 08:37 PM	#4
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: And faster we shall go.. Get ready to smile REAL BIG !!!! __________________ greg http://community.webshots.com/user/68406Stepside

06-30-2010, 02:55 AM	#5
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: And faster we shall go.. I supose we will Marv.. In due time I probably won't have much time to do anything for the next 6 months though with school.. Maybe some motor TNT'ing but that's about it. On another note, I was comparing my mph against a buddies 4th gen F-body. He makes 415ish and I make 450ish. 1/8 mile I had him by 3mph, the 1/4 he had me 3mph (so he gained 6mph more than I). Both are autos.. Dam brick walls we race __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

07-02-2010, 10:25 AM	#6
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: And faster we shall go.. LOL, yeah I had a guy who builds cars tell me I should cut the 'visor' portion of the roof off and lay it back so air could slip over the windshield / roof. I couldn't help but laugh,, so what would we do about that frontal area above the bumper!! LOL. About a aerodynamic as an apartment complex!! __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

07-15-2010, 12:26 AM	#7
dbmx66 Registered User Join Date: Aug 2009 Location: PA Posts: 883	Re: And faster we shall go.. i see a twisted chassis in the future



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.