upper control arm rebuild?

[texastrendz]

i am going to rebuild my upper 73-87 2wd upper control arms with the black poly bushing kit from energy suspension. i took them a part in a hurry and do not remember if it is important which way the shaft goes. also i have a little washer along with the two big washers for the center shaft. does anyone have a factory brake down or a picture of how to reassemble these. i searched with no success. thanks again daniel

[texastrendz]

my main concern is with the smaller washer, i dont remember if it goes toward the front of the a arm or the rear. if someon can post a pic of a 73-87 upper a arm that would be great. thanks again daniel

[texastrendz]

nobodys 73-87 2wd c10 upper a arms have a small washer on the inside of the bushing? man i cannot be the only one. help

[dwcsr]

Does the washer your talking about have a serrated edge? It goes toward the back on mine. I really don't know what purpose it servers, I've left it out before and not had any problems.

[texastrendz]

yep thats the washer i am talking about, i have looked at about 20 diffrent upper a arms and none of them have these washers. i guess i will put towards the back then, thanks daniel