The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-23-2010, 07:42 PM   #1
dmancuso
Registered User
 
dmancuso's Avatar
 
Join Date: May 2010
Location: North Babylon New York
Posts: 6
Transmissiom

I just had a rebuilt turbo 350 installed at a shop and now when I put it in gear it brings the rpm all the way down and then stalls, I have idle up really high and does not fix the problem. Does anyone have ideas or maybe something went wrong at thetransmission shop?.
dmancuso is offline   Reply With Quote
Old 07-23-2010, 08:04 PM   #2
cableguy0
Senior Member
 
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,948
Re: Transmissiom

Take it back to them. Theres no reason an auto trans should stall an engine. Something isnt right internally.
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.
cableguy0 is offline   Reply With Quote
Old 07-23-2010, 09:05 PM   #3
3r!c84
Badass
 
3r!c84's Avatar
 
Join Date: Jan 2009
Location: lox. fl
Posts: 4,586
Re: Transmissiom

ditto
__________________
Think outside the box?
-84c10 (1stcar)→My Build
-00 Saturn 5spd

drop a gear and disappear!

1/4:13:90
3r!c84 is offline   Reply With Quote
Old 07-24-2010, 08:28 AM   #4
James McClure
One shot, one kill.
 
Join Date: Dec 2007
Location: Saratoga Springs NY
Posts: 859
Re: Transmissiom

I've rebuilt automatics before, especially 350's and 350C's. It sounds to me like the tranny shop accidently got a 350C converter on your 350. If there was a failure inside the trans itself and the tranny locked into every gear it had all at once, the eng should still run and not stall out. If they got a "C" type converter on a 350 it would stall OR,OR, they damaged (or forgot to install it) the rubber "O" ring on the input shaft it would stall. Either way, it goes back to the tranny shop with the question "how did it pass a road test and why did you release the truck to me if it wasen't right?" As a customer, I never would have taken it off thier lot in the first place. Keep us posted AND post the name of the shop so no one else has a problem. If they stand behind thier work, post that too. Jim
__________________
1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shotJim or Paladin whichever you choose.
James McClure is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com