|
07-23-2010, 05:47 PM
|
#1 |
|
Registered User
Join Date: May 2010
Location: London, Ontairio
Posts: 163
|
Drop Advice
Hi, i know theres alot of these posts, but i am looking for something a little more specific. I want to lower my truck, not too much due the poor roads up here in ontario(salt/snow/plow). I was thinking 2.5/4 With spindles and shackles? How does this ride? And a ball park figure on price would be great.
Insallation... How do these install? are the difficult, i have never done any rear work before, i have replaced all 4 ball joints and they are stil clean. (6months ago) What about shocks, do i need those. Do i have to modify my exhaust with this kit. Duals up over the axle. I big thing is, i am not rich buy any means. So i thae parts i could buy and even if i couldn't do the rear, i could have someone do them. One big thing, i can't afford rims so my stock rallies will have to do. How will the look under there? Pictures would be greatly appreciated. Mine are 235/75R15s all the way around. Here is mine, pics of 2.5/4 drops with stock rallies with the above parts listed would be great. Also, sport bumper added since the photos were taken. Build thread: http://67-72chevytrucks.com/vboard/s...light=wrangler
__________________
1987 GMC Wrangler - 305TBI/TH400/Duals 1968 Camaro - Resto 2010 Ranger  I only drive truck 6 months a year... Dam Canadian winters.
|
|
|
|
07-23-2010, 08:58 PM
|
#2 | |
|
Registered User
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
|
Re: Drop Advice
Quote:
Last edited by mooseknuckles; 07-23-2010 at 09:04 PM. |
|
|
|
|
|
07-23-2010, 10:43 PM
|
#4 |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
|
Re: Drop Advice
heres my hauss
 McGaugys drop spindles with factory coils uncut McGaugys drop shackles 81-91 suburban hangers clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
|
|
|
07-23-2010, 11:55 PM
|
#5 |
|
TUKE-NoBullChit Customs owner
Join Date: Feb 2010
Location: La Marque, Tx
Posts: 640
|
Re: Drop Advice
what size tires are those 87chevy.com? looks real good
__________________
OWNER @ NBC Customs...No Bull Chit....'92 GMC C2500 ECSB 350/TH400, '57 FORD SKYLINER (My dad's for now, but its really mine-you'll NEVER see a cooler car at 7 years old lol), '42 ford rat rod shop truck (new project), 91 CHRYSLER VOYER MINIVAN (shop van for now) http://www.facebook.com/#!/nbc.customs 
|
|
|
|
|
07-24-2010, 01:05 PM
|
#6 |
|
Registered User
Join Date: May 2010
Location: London, Ontairio
Posts: 163
|
Re: Drop Advice
Mine are 15" rallies with 235/75R15s all the way around, total height i don't know.
__________________
1987 GMC Wrangler - 305TBI/TH400/Duals 1968 Camaro - Resto 2010 Ranger I only drive truck 6 months a year... Dam Canadian winters.
|
|
|
|
|
07-24-2010, 03:17 PM
|
#7 |
|
TUKE-NoBullChit Customs owner
Join Date: Feb 2010
Location: La Marque, Tx
Posts: 640
|
Re: Drop Advice
think thats a 27" tire
__________________
OWNER @ NBC Customs...No Bull Chit....'92 GMC C2500 ECSB 350/TH400, '57 FORD SKYLINER (My dad's for now, but its really mine-you'll NEVER see a cooler car at 7 years old lol), '42 ford rat rod shop truck (new project), 91 CHRYSLER VOYER MINIVAN (shop van for now) http://www.facebook.com/#!/nbc.customs
|
|
|
|
|
07-24-2010, 03:40 PM
|
#8 | |
|
6.0 powered square
Join Date: Feb 2008
Location: Mesquite texas
Posts: 3,459
|
Re: Drop Advice
Quote:
__________________
Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
