WI 6 Cyl Power steering pump/box - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cypressbog · 11-18-2009, 11:56 PM

Are you wanting to convert your 250ci truck to power steering? This set-up will provide almost everything you need except the crank pully. It's a used power steering box with idler arm and the pump with brackets that will work on our year trucks.

Will come delivered to your address in two heavy boxes for $115. Perfer Paypal to cypressbog1@yahoo.com. Will accept Postal MO, but won't ship until check clears.

toomanytoyz · 11-19-2009, 01:39 AM

ttt............

Good Guy to Deal With...............

Rick

*sharpie1972* · 11-19-2009, 01:43 AM

If you decide to split this up let me know. I have plenty of PS boxes, but would be interested in the pump and brackets. Thanks, Sharpie

bestchevyfan · 11-19-2009, 06:35 AM

Hi, what did this come off ? Thanks,buddy

cypressbog · 11-19-2009, 01:07 PM

I wish I could answer your question. I bought this set-up from board member Teeitup back in late 2005 or early 2006. I intended to put it on a 1972 with the 250ci and never got that far with the project. The engine froze up early this year and I've been getting rid of the parts pile I was accumulating for this. I do know that it will fit our factory 250ci from 67-72.

**70STOVEBOLT** · 11-21-2009, 11:49 AM

If the pump & box work good, I will take it. I won't be back on here until tomorrow though, and I will get with you then.

Thanks,
Mark

toomanytoyz · 11-21-2009, 12:12 PM

Quote:

Originally Posted by sharpie1972

If you decide to split this up let me know. I have plenty of PS boxes, but would be interested in the pump and brackets. Thanks, Sharpie

Since it look's like it's sold i do have just the Pump with Brkts if u are interested..........

Rick

**70STOVEBOLT** · 11-22-2009, 09:41 PM

cypressbog, do you know if this setup is in good working condition? If so, I will take it. PM me and we can work out the details.
Thanks, Mark

dabruce15 · 07-26-2010, 11:13 PM

Is this still available? I'm interested in the pump and brackets. Thanks!

72BlckButy · 07-27-2010, 08:10 PM

Curious as well if this hasn't sold.

Interested!

Botietruck · 07-27-2010, 09:58 PM

If it gets to me, I'll take it.

**70STOVEBOLT** · 07-28-2010, 08:41 AM

I bought this back in November 2009. Not sure why he didn't say it was sold?

11-18-2009, 11:56 PM	#1
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	6 Cyl Power steering pump/box Are you wanting to convert your 250ci truck to power steering? This set-up will provide almost everything you need except the crank pully. It's a used power steering box with idler arm and the pump with brackets that will work on our year trucks. Will come delivered to your address in two heavy boxes for $115. Perfer Paypal to cypressbog1@yahoo.com. Will accept Postal MO, but won't ship until check clears. Attached Images

11-19-2009, 01:39 AM	#2
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: 6 Cyl Power steering pump/box ttt............ Good Guy to Deal With............... Rick __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde Last edited by toomanytoyz; 11-19-2009 at 01:39 AM.

11-19-2009, 01:43 AM	#3
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 6 Cyl Power steering pump/box If you decide to split this up let me know. I have plenty of PS boxes, but would be interested in the pump and brackets. Thanks, Sharpie

11-19-2009, 06:35 AM	#4
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: 6 Cyl Power steering pump/box Hi, what did this come off ? Thanks,buddy

11-19-2009, 01:07 PM	#5
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: 6 Cyl Power steering pump/box I wish I could answer your question. I bought this set-up from board member Teeitup back in late 2005 or early 2006. I intended to put it on a 1972 with the 250ci and never got that far with the project. The engine froze up early this year and I've been getting rid of the parts pile I was accumulating for this. I do know that it will fit our factory 250ci from 67-72.

11-21-2009, 11:49 AM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: 6 Cyl Power steering pump/box If the pump & box work good, I will take it. I won't be back on here until tomorrow though, and I will get with you then. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-22-2009, 09:41 PM	#8
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: 6 Cyl Power steering pump/box cypressbog, do you know if this setup is in good working condition? If so, I will take it. PM me and we can work out the details. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

07-26-2010, 11:13 PM	#9
dabruce15 Registered User Join Date: Mar 2009 Location: Chatsworth, CA Posts: 236	Re: 6 Cyl Power steering pump/box Is this still available? I'm interested in the pump and brackets. Thanks! __________________ Beauty is in the eye of the beer-holder. Praise the lowered!

07-27-2010, 08:10 PM	#10
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 6 Cyl Power steering pump/box Curious as well if this hasn't sold. Interested! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

07-27-2010, 09:58 PM	#11
Botietruck '71 chevy s.bed/s.side Join Date: Mar 2005 Location: Chesapeake, VA Posts: 1,571	Re: 6 Cyl Power steering pump/box If it gets to me, I'll take it. __________________ STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive!

07-28-2010, 08:41 AM	#12
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: 6 Cyl Power steering pump/box I bought this back in November 2009. Not sure why he didn't say it was sold? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.