Belltech spindles for 71 - 72? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DA68** · 05-05-2010, 10:43 PM

I just traded my stock spindles and some cash for a set of BellTech lowered spindles. I was told they were on a 72, but I'm a bit worried as i don't see a fitment for 71 - 72 on their website.
I believe that as long as I'm running disc brakes, the 73 and later spindles will work? Can someone verify or refute this for me? Any mods (later ball joints) required?

**KevsClassics** · 05-06-2010, 12:07 AM

Quote:

Originally Posted by DA68

I just traded my stock spindles and some cash for a set of BellTech lowered spindles. I was told they were on a 72, but I'm a bit worried as i don't see a fitment for 71 - 72 on their website.
I believe that as long as I'm running disc brakes, the 73 and later spindles will work? Can someone verify or refute this for me? Any mods (later ball joints) required?

I have bought and installed Bell Tech spindles for 71-72 with no mods.
I have also used the 73-87 spindles just had to use 73-87 tie rod ends also.

**DA68** · 05-06-2010, 06:45 AM

Would you know the part number for the Belltech 71 - 72 spindles?

Evs-One · 07-30-2010, 06:38 PM

3120 is the part# for the 71-72 spindles, supposed to be 3" drop.

3100 is 73+...the instructions for the 3120 don't even show a 3120 on the install sheet, but they are stamped 3120.

I had a nice long conversation with a KW employee(KW owns Belltech now) about the fitment.

05-05-2010, 10:43 PM	#1
DA68 Registered User Join Date: Oct 2006 Location: Ohio Posts: 967	Belltech spindles for 71 - 72? I just traded my stock spindles and some cash for a set of BellTech lowered spindles. I was told they were on a 72, but I'm a bit worried as i don't see a fitment for 71 - 72 on their website. I believe that as long as I'm running disc brakes, the 73 and later spindles will work? Can someone verify or refute this for me? Any mods (later ball joints) required?

05-06-2010, 06:45 AM	#3
DA68 Registered User Join Date: Oct 2006 Location: Ohio Posts: 967	Re: Belltech spindles for 71 - 72? Would you know the part number for the Belltech 71 - 72 spindles?

07-30-2010, 06:38 PM	#4
Evs-One Registered User Join Date: Sep 2005 Location: Vancouver, WA Posts: 16	Re: Belltech spindles for 71 - 72? 3120 is the part# for the 71-72 spindles, supposed to be 3" drop. 3100 is 73+...the instructions for the 3120 don't even show a 3120 on the install sheet, but they are stamped 3120. I had a nice long conversation with a KW employee(KW owns Belltech now) about the fitment. __________________ 71 Cheyenne 95 Civic- J32A2 V6 swap 01 MDX 04 VFR800



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.