|
05-31-2003, 06:52 PM
|
#1 |
|
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
New cam/headers
I went ahead and got the Dynomax cerama-coat headers from jegs, along with a new Crane Powermax cam
Duration 272/284 Lift 515/510 Should be pushin 370 horses now Anybody out there reccomend any certain torque converters? Stall speeds or brands. Thnanx. Thank you to everyone that helped me with the dynomax headers!   
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
|
|
|
05-31-2003, 07:02 PM
|
#2 |
|
Senior Member
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,950
|
go and get yourself a tci 2500 or 3000 stall how often do you drive the truck what gears are in it and whats the duration @.050 on that cam
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member. |
|
|
|
|
06-01-2003, 10:39 AM
|
#3 |
|
Post Whore
 
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,683
|
That's gonna be nice! When will it be installed?
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
|
|
|
|
06-01-2003, 10:51 AM
|
#4 |
|
Nothing fits but the oil
Join Date: Mar 2003
Location: Gaston, Indiana
Posts: 424
|
What rear gear are you running? I have the 3:07 (I think) or the 3:08 with almost the same cam, I run a 2500 stall, but could use a 2800.
__________________
Land of the free Because of the brave |
|
|
|
|
06-01-2003, 06:35 PM
|
#5 |
|
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
I'm running a Dana 60 rear with 3.54 gears I have a stock torque converter but am halfway looking for an aftermarket one.
Jack- the parts should show up tommorrow(Monday) and we should have them installed by Wednesday at the latest.
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
