The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-02-2010, 03:08 PM   #1
JAB'70
Registered User
 
Join Date: May 2007
Location: South Carolina
Posts: 54
Ignition Question(s)

I did a little upgrade over the weekend to my pick'm up ('70 c10, 350, 5.7L 4BBL Eldebrock 1406 carb). I replace the HEI with a complete ignition setup - MDS AL6 ignition box, MSD Blaster 2 coil, MSD Pro Billet Distributor, New spark plug wires, new spark plugs (AC Delco R43T).

I set my plugs gapl is set at .45, started it up and it's a rough idle (I have not set the timing yet).

The question is did I set the plug gap to large?

A friend of mind said I quote " they should be set between .35 to .40 you need some really good fire if the gap is set at .45."

I said, I thought the new setup gave really good fire...am I in left field???
__________________
CWO3, USN, RET
When a man's ways please the Lord, He makes even his enemies to be at peace
with him.; A man's heart plans his way, But the Lord direct his steps." (Prov
16:7, 9 NKJV)
Never look down on anyone unless you are helping them up. SMS.
JAB'70 is offline   Reply With Quote
Old 08-02-2010, 03:14 PM   #2
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,731
Re: Ignition Question(s)

I ran the same set up on a 350. Spark plug gap at .55. Made a big difference in how it ran with the wider gap. Ran way better. Just experiment a bit to find your optimum gap.
Some say that an MSD like yours has enough fire power to weld with!!! Get your buddy to hand onto a sparkplug wire while you crank it. He'll find out about power!!!

Last edited by geezer#99; 08-02-2010 at 03:22 PM.
geezer#99 is offline   Reply With Quote
Old 08-02-2010, 03:20 PM   #3
cdowns
Senior Member
 
cdowns's Avatar
 
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
Re: Ignition Question(s)

you could try the MSD techline too//or if you have the instruction sheets it should b in them
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane

MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF

DONT BELIEVE EVERYTHING YOU THINK

TAKE MY ADVISE;I DON'T USE IT ANYWAY
cdowns is offline   Reply With Quote
Old 08-02-2010, 03:27 PM   #4
Wrenchbender Ret
Registered User
 
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,229
Re: Ignition Question(s)

You set the gap just right. A variation will not cause a noticable problem. You need to check your wires & make sure they are not crossed. Set the timing. Check for vacuum leaks.
Wrenchbender Ret is offline   Reply With Quote
Old 08-02-2010, 04:43 PM   #5
truckdude239
Senior Member
 
truckdude239's Avatar
 
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,237
Re: Ignition Question(s)

idle will be bad untill timing is set
__________________
David fuller
Ase Certified Mechanic
Click here to help support our board!!


1971 Chevy c-10 under going a 4.8l LSx swap

Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305

2007 Honda Accord my daily 145kmiles
2002 Honda Accord 4 door With 330k(sisters car)
2005 toyota Avalon 228k( brothers car)
2002 Sububran 5.3 245k
2000 Tahoe 5.3l 378

General manager for Marco's Carwash & lube
truckdude239 is offline   Reply With Quote
Old 08-02-2010, 06:57 PM   #6
sleepertruck72
Registered User
 
sleepertruck72's Avatar
 
Join Date: Nov 2007
Location: Turlock California 95380
Posts: 2,075
Re: Ignition Question(s)

I think your spark plug gap is fine. The standard GM HEI uses that same gap. I would set the timing as mentioned as see how she likes it. I was thinking about upgrading to the same pro billet distributor, but I thought it didnt require the 6al box.
__________________
72 C20 Longbed
05 1500 Z71
sleepertruck72 is offline   Reply With Quote
Old 08-02-2010, 07:36 PM   #7
BERT306
Registered User
 
BERT306's Avatar
 
Join Date: Jul 2005
Location: Steeleville IL
Posts: 72
Re: Ignition Question(s)

Hope you mean .045
__________________
72 k10 swb. 350/th350/np205. Vintage air'd daily driver
BERT306 is offline   Reply With Quote
Old 08-02-2010, 10:00 PM   #8
JAB'70
Registered User
 
Join Date: May 2007
Location: South Carolina
Posts: 54
Re: Ignition Question(s)

Quote:
Originally Posted by BERT306 View Post
Hope you mean .045
Yep! Just fast typing .045 is what I meant....
__________________
CWO3, USN, RET
When a man's ways please the Lord, He makes even his enemies to be at peace
with him.; A man's heart plans his way, But the Lord direct his steps." (Prov
16:7, 9 NKJV)
Never look down on anyone unless you are helping them up. SMS.
JAB'70 is offline   Reply With Quote
Old 08-02-2010, 10:02 PM   #9
JAB'70
Registered User
 
Join Date: May 2007
Location: South Carolina
Posts: 54
Re: Ignition Question(s)

Quote:
Originally Posted by sleepertruck72 View Post
I think your spark plug gap is fine. The standard GM HEI uses that same gap. I would set the timing as mentioned as see how she likes it. I was thinking about upgrading to the same pro billet distributor, but I thought it didnt require the 6al box.
You can run a pro billet with coil on top. No need for a box.
__________________
CWO3, USN, RET
When a man's ways please the Lord, He makes even his enemies to be at peace
with him.; A man's heart plans his way, But the Lord direct his steps." (Prov
16:7, 9 NKJV)
Never look down on anyone unless you are helping them up. SMS.
JAB'70 is offline   Reply With Quote
Old 08-02-2010, 10:04 PM   #10
JAB'70
Registered User
 
Join Date: May 2007
Location: South Carolina
Posts: 54
Re: Ignition Question(s)

Quote:
Originally Posted by truckdude239 View Post
idle will be bad untill timing is set
I assumed it would, just threw the question out because my friend insist my plugs are gapped wrong....
__________________
CWO3, USN, RET
When a man's ways please the Lord, He makes even his enemies to be at peace
with him.; A man's heart plans his way, But the Lord direct his steps." (Prov
16:7, 9 NKJV)
Never look down on anyone unless you are helping them up. SMS.
JAB'70 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com