Project 65 C10- Take two - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dlisabeth · 08-06-2010, 12:55 AM

more pics

dlisabeth · 08-06-2010, 01:01 AM

last pictures for now

Check out the original dent free bumper that I picked up for $40! It will be dropped off at the powdercoater's with the front grille soon.

dlisabeth · 10-04-2010, 12:58 AM

Here are some updated photos. I found some Hedman headers that fit with a slight modification to the passenger lower control arm. The inner fenders, radiator core support, heater box, brake booster, and other small parts have been sandblasted painted and reinstalled. I have painted and installed the new steering column and connected it to the 700r4. I had the rear axles redrilled and the hub register turned down so that I could use some '71 5-lug drums. I also cut 1 coil off of the stock front springs to improve the stance which was a bit nose high. I am ready to start plumbing the motor and brakes and running electrical so that I can fire up the new motor. i will also have to rig up a temporary exhaust so that I can drive it to the muffler shop to get a new system made. Enjoy the pics.

dlisabeth · 10-04-2010, 12:59 AM

more pics

**ChiefRocka** · 10-14-2010, 05:28 AM

Coming along nicely ....

dlisabeth · 11-15-2010, 12:45 AM

Well I was finally able to take the truck for a spin around the block this afternoon. What a satisfying feeling it was to back it out of the garage under its own power. The engine wiring is only temporary and the fenders, hood, and grill support are not installed but it was still great. The motor runs great, the trans seems to shift fine (you never know with a used trans), the power brakes and steering also worked great. I cut one coil off of the stock '85 front springs and think it is sitting a bit low. I am planning on running a set of 1" drop coils for the front instead. The next step is installing some shocks, pinion shims, and permanent wiring. I want to take it to a local cruise/show on December 12th so that is my deadline.

I struggled with the brakes for a few days and finally figured out that the s10master cylinder could not push enough fluid. I switched it out for a C10 master and now they work perfectly while still using the s10 booster.

dlisabeth · 11-15-2010, 12:47 AM

more pics

notice the custom dash!

08-06-2010, 12:55 AM	#1
dlisabeth Registered User Join Date: Oct 2009 Location: Howell, Michigan Posts: 102	Re: Project 65 C10- Take two more pics Attached Images __________________ 1965 Shortbed stepside Chevrolet C-10 My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=409676

08-06-2010, 01:01 AM	#2
dlisabeth Registered User Join Date: Oct 2009 Location: Howell, Michigan Posts: 102	Re: Project 65 C10- Take two last pictures for now Check out the original dent free bumper that I picked up for $40! It will be dropped off at the powdercoater's with the front grille soon. Attached Images __________________ 1965 Shortbed stepside Chevrolet C-10 My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=409676

10-04-2010, 12:58 AM	#3
dlisabeth Registered User Join Date: Oct 2009 Location: Howell, Michigan Posts: 102	Re: Project 65 C10- Take two Here are some updated photos. I found some Hedman headers that fit with a slight modification to the passenger lower control arm. The inner fenders, radiator core support, heater box, brake booster, and other small parts have been sandblasted painted and reinstalled. I have painted and installed the new steering column and connected it to the 700r4. I had the rear axles redrilled and the hub register turned down so that I could use some '71 5-lug drums. I also cut 1 coil off of the stock front springs to improve the stance which was a bit nose high. I am ready to start plumbing the motor and brakes and running electrical so that I can fire up the new motor. i will also have to rig up a temporary exhaust so that I can drive it to the muffler shop to get a new system made. Enjoy the pics. Attached Images __________________ 1965 Shortbed stepside Chevrolet C-10 My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=409676

10-04-2010, 12:59 AM	#4
dlisabeth Registered User Join Date: Oct 2009 Location: Howell, Michigan Posts: 102	Re: Project 65 C10- Take two more pics Attached Images __________________ 1965 Shortbed stepside Chevrolet C-10 My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=409676

10-14-2010, 05:28 AM	#5
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,151	Re: Project 65 C10- Take two Coming along nicely .... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

11-15-2010, 12:45 AM	#6
dlisabeth Registered User Join Date: Oct 2009 Location: Howell, Michigan Posts: 102	It's alive!!! Well I was finally able to take the truck for a spin around the block this afternoon. What a satisfying feeling it was to back it out of the garage under its own power. The engine wiring is only temporary and the fenders, hood, and grill support are not installed but it was still great. The motor runs great, the trans seems to shift fine (you never know with a used trans), the power brakes and steering also worked great. I cut one coil off of the stock '85 front springs and think it is sitting a bit low. I am planning on running a set of 1" drop coils for the front instead. The next step is installing some shocks, pinion shims, and permanent wiring. I want to take it to a local cruise/show on December 12th so that is my deadline. I struggled with the brakes for a few days and finally figured out that the s10master cylinder could not push enough fluid. I switched it out for a C10 master and now they work perfectly while still using the s10 booster. Attached Images __________________ 1965 Shortbed stepside Chevrolet C-10 My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=409676 Last edited by dlisabeth; 11-15-2010 at 02:33 AM.

11-15-2010, 12:47 AM	#7
dlisabeth Registered User Join Date: Oct 2009 Location: Howell, Michigan Posts: 102	Re: Project 65 C10- Take two more pics notice the custom dash! Attached Images __________________ 1965 Shortbed stepside Chevrolet C-10 My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=409676 Last edited by dlisabeth; 11-15-2010 at 12:48 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.