Went to the track tonight, new best time... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

383 Stroker · 05-17-2003, 12:06 AM

Did you get aluminum heads?

bigjimzlll · 05-17-2003, 07:37 AM

nope...

540 Stroker · 05-30-2003, 09:11 PM

Sweet! I love the video between you and the Lightning. Just how close was that race? Keep up the great progress with your truck and let us know when you drop into the 11s.

383 Stroker · 05-30-2003, 09:59 PM

540 Stroker, it was really close. I won on R/T .544 to his .690, I ran a 8.17 to his 8.15. I was running a 100hp shot at the time. That Lightning has run a 7.66 @ 91mph with a 100hp shot. But he threw a rod out the side of the block last time he ran. I got it on video, here's a link check it out. http://www.geocities.com/my67c10racing3/lightning.html

540 Stroker · 06-01-2003, 02:25 AM

Nice...you caught him sleeping! Nothing wrong with that.

A big ouch to the Lightning owner.... to run that quick and then blow the engine through the lights. That's not the first L I've seen that's tossed a rod. Was he running the stock rods? I've heard the stock rods in the Lightnings are "weak" and can't really handle any sustained, hard abuse. Cool video though....I love Lightnings and their blower whine....I've always wanted one since the redesigned 99s came out.

dinnut · 06-01-2003, 02:33 AM

it seemed like that dodge was faster than the 5.0 mustangs... and the cobra couldnt do a burnout... they would spin and he would start rolling.

540 Stroker · 06-01-2003, 02:50 AM

That old Dodge was cool....I love seeing 2 old trucks going at it. 383 Stroker-What was he running in that thing?

Chances are the guy in the Cobra didn't know how to hold a burnout with a manual trans. You have to dump the clutch and then immediately tap the brake all the while trying not to stall it or lose control. If you've never tried this before, it's easier said than done. Probably better to just do what he did if you can't do it right.

383 Stroker · 06-01-2003, 10:21 PM

540 Stroker, the Lightning had stock rods. Yeah, it sucks for that guy, it was his wife's daily driver. He just had one of the heads replaced because it blew a spark plug out. The Dodge had a 440ci, auto tranny with 4200 stall converter and 4.56 gear. It was a good running truck, 8.02 @84mph with a 1.75 60ft. That Cobra was running on street tires, so all he really needed to do is clean them off. The Cobra ran a 8.35 @87mph with a 2.09 60ft.

bigjimzlll · 06-01-2003, 10:30 PM

hey stroker...did you here I broke a piston....just bought a stroker kit today

383 Stroker · 06-01-2003, 10:41 PM

bigjimzlll, no I didn't know that. When did that happen? What kind of stroker kit did you get?

bigjimzlll · 06-01-2003, 10:48 PM

it happened last night...I had a lean pop..dont know how or why..either broke a ring or landing..runs ok, but I have a ton of blow by. I got an eagle forged crank eagle forged rods and probe lightwieght forged pistons..full floaters.. 20cc dish..so that makes for 11-1CR. I also ordered a comp CS282s-10 solid lifter cam. The psitons are .040 over

383 Stroker · 06-01-2003, 10:55 PM

Sounds like a nice kit. Did you get a chance to try the new converter? What fuel pump do you have?

bigjimzlll · 06-01-2003, 10:59 PM

the new converter isnt here yet...just as well..I have a holley blue pump..On the run that it blew on..I had a 1.92 60 foot time

383 Stroker · 06-01-2003, 11:52 PM

Did you get to make a full pass before it broke? What kinda times did you run? How much nitrous were you running when it broke?

bigjimzlll · 06-02-2003, 12:02 AM

went 12.1X at 111MPH...dont have the timeslips here..Just running a 100shot. The engine just didnt "feel" right all night. Had a few pops while not on the bottle, but cleared up. I thought it was a plug that cleared

383 Stroker · 06-02-2003, 12:06 PM

540 Stroker, what do you have the 540 in? My cousin has a Scott Shafiroff 540 with a 150hp shot in a Regal, he runs 6.0's @113mph in the 1/8 mile.

05-17-2003, 12:06 AM	#26
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	Did you get aluminum heads? __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear

05-17-2003, 07:37 AM	#27
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	nope... __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

05-30-2003, 09:11 PM	#28
540 Stroker Registered User Join Date: Sep 2002 Location: Northern Illinois Posts: 53	Sweet! I love the video between you and the Lightning. Just how close was that race? Keep up the great progress with your truck and let us know when you drop into the 11s. __________________ Got torque?

05-30-2003, 09:59 PM	#29
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	540 Stroker, it was really close. I won on R/T .544 to his .690, I ran a 8.17 to his 8.15. I was running a 100hp shot at the time. That Lightning has run a 7.66 @ 91mph with a 100hp shot. But he threw a rod out the side of the block last time he ran. I got it on video, here's a link check it out. http://www.geocities.com/my67c10racing3/lightning.html __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear Last edited by 383 Stroker; 05-30-2003 at 10:04 PM.

06-01-2003, 02:25 AM	#30
540 Stroker Registered User Join Date: Sep 2002 Location: Northern Illinois Posts: 53	Nice...you caught him sleeping! Nothing wrong with that. A big ouch to the Lightning owner.... to run that quick and then blow the engine through the lights. That's not the first L I've seen that's tossed a rod. Was he running the stock rods? I've heard the stock rods in the Lightnings are "weak" and can't really handle any sustained, hard abuse. Cool video though....I love Lightnings and their blower whine....I've always wanted one since the redesigned 99s came out. __________________ Got torque? Last edited by 540 Stroker; 06-01-2003 at 02:40 AM.

06-01-2003, 02:33 AM	#31
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	it seemed like that dodge was faster than the 5.0 mustangs... and the cobra couldnt do a burnout... they would spin and he would start rolling. __________________ 70 longbed 496/th400/Ford 9"

06-01-2003, 02:50 AM	#32
540 Stroker Registered User Join Date: Sep 2002 Location: Northern Illinois Posts: 53	That old Dodge was cool....I love seeing 2 old trucks going at it. 383 Stroker-What was he running in that thing? Chances are the guy in the Cobra didn't know how to hold a burnout with a manual trans. You have to dump the clutch and then immediately tap the brake all the while trying not to stall it or lose control. If you've never tried this before, it's easier said than done. Probably better to just do what he did if you can't do it right. __________________ Got torque?

06-01-2003, 10:21 PM	#33
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	540 Stroker, the Lightning had stock rods. Yeah, it sucks for that guy, it was his wife's daily driver. He just had one of the heads replaced because it blew a spark plug out. The Dodge had a 440ci, auto tranny with 4200 stall converter and 4.56 gear. It was a good running truck, 8.02 @84mph with a 1.75 60ft. That Cobra was running on street tires, so all he really needed to do is clean them off. The Cobra ran a 8.35 @87mph with a 2.09 60ft. __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear

06-01-2003, 10:30 PM	#34
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	hey stroker...did you here I broke a piston....just bought a stroker kit today __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

06-01-2003, 10:41 PM	#35
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	bigjimzlll, no I didn't know that. When did that happen? What kind of stroker kit did you get? __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear

06-01-2003, 10:48 PM	#36
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	it happened last night...I had a lean pop..dont know how or why..either broke a ring or landing..runs ok, but I have a ton of blow by. I got an eagle forged crank eagle forged rods and probe lightwieght forged pistons..full floaters.. 20cc dish..so that makes for 11-1CR. I also ordered a comp CS282s-10 solid lifter cam. The psitons are .040 over __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

06-01-2003, 10:55 PM	#37
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	Sounds like a nice kit. Did you get a chance to try the new converter? What fuel pump do you have? __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear

06-01-2003, 10:59 PM	#38
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	the new converter isnt here yet...just as well..I have a holley blue pump..On the run that it blew on..I had a 1.92 60 foot time __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

06-01-2003, 11:52 PM	#39
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	Did you get to make a full pass before it broke? What kinda times did you run? How much nitrous were you running when it broke? __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear

06-02-2003, 12:02 AM	#40
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	went 12.1X at 111MPH...dont have the timeslips here..Just running a 100shot. The engine just didnt "feel" right all night. Had a few pops while not on the bottle, but cleared up. I thought it was a plug that cleared __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA



Register or Log In To remove these advertisements.

06-02-2003, 12:06 PM	#41
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	540 Stroker, what do you have the 540 in? My cousin has a Scott Shafiroff 540 with a 150hp shot in a Regal, he runs 6.0's @113mph in the 1/8 mile. __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear

Register or Log In To remove these advertisements.