Stainlees Steel Brake Flex Hoses Needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lts70 · 08-06-2010, 11:20 PM

Looking for the best deal on some good stainless steel brake flex lines. I have factory disc brakes and I am converting to rear disc brakes as well. I want to do all four corners in SS flex lines.

What are you guys using for rear line lengths. I am using the same calipers out back as the original fronts. Could I just use the same flex lines as one would run in the front?

Thanks guys

myoldchevytruck · 08-07-2010, 05:51 AM

Here's the place that I used. I actually sent my rubber lines to them and asked them to duplicate my lines into Steel Braided Lines. Also, I was unsure of the fitting sizes so this way, there was no question. I think they were about $25 each if I remember right.

Here's the companies link: http://www.bonacoinc.com/

cdowns · 08-07-2010, 07:48 AM

speedway motors has stainless brake line kits for GM calipers

colin_havens · 08-08-2010, 01:52 PM

I used these guys for mine, but they were local when I lived in North MS. They are in Memphis TN. The old man that owns the business has been around drag racing forever, and really knows his stuff. They can get any length, and any fittings you need. However, if I remember correctly, they werent cheap. I bought 5 stainless lines (dont remember the lengths), fittings, and brackets, and it was around $200. But they look real nice.

http://www.godmanhiperformance.com/

08-06-2010, 11:20 PM	#1
lts70 1970 Daily Driver Join Date: Jun 2007 Location: Glenns Ferry IDAHO Posts: 1,037	Stainlees Steel Brake Flex Hoses Needed Looking for the best deal on some good stainless steel brake flex lines. I have factory disc brakes and I am converting to rear disc brakes as well. I want to do all four corners in SS flex lines. What are you guys using for rear line lengths. I am using the same calipers out back as the original fronts. Could I just use the same flex lines as one would run in the front? Thanks guys __________________ It's not truly yours if you didn't build it yourself or if you don't do your own maintenance.

08-07-2010, 05:51 AM	#2
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: Stainlees Steel Brake Flex Hoses Needed Here's the place that I used. I actually sent my rubber lines to them and asked them to duplicate my lines into Steel Braided Lines. Also, I was unsure of the fitting sizes so this way, there was no question. I think they were about $25 each if I remember right. Here's the companies link: http://www.bonacoinc.com/ __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors Last edited by myoldchevytruck; 08-07-2010 at 05:53 AM.

08-07-2010, 07:48 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Stainlees Steel Brake Flex Hoses Needed speedway motors has stainless brake line kits for GM calipers __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

08-08-2010, 01:52 PM	#4
colin_havens Registered User Join Date: Dec 2007 Location: Mountain Home, AR Posts: 405	Re: Stainlees Steel Brake Flex Hoses Needed I used these guys for mine, but they were local when I lived in North MS. They are in Memphis TN. The old man that owns the business has been around drag racing forever, and really knows his stuff. They can get any length, and any fittings you need. However, if I remember correctly, they werent cheap. I bought 5 stainless lines (dont remember the lengths), fittings, and brackets, and it was around $200. But they look real nice. http://www.godmanhiperformance.com/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.