$900 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pugs · 08-08-2010, 03:53 PM

there should be enough travel for the converter to bolt up with out the spacers
also make sure you have the converter locked in right by spinning it or you could f-up the trans real quick

MikeM · 08-10-2010, 11:06 PM

Quote:

Originally Posted by pugs

there should be enough travel for the converter to bolt up with out the spacers
also make sure you have the converter locked in right by spinning it or you could f-up the trans real quick

so if I slide the converter forward to make up that 3/4", will it still be far enough into the tranny? Im gonna be working on that tomorrow, along with shortening my driveshaft by an inch.

08-08-2010, 03:53 PM	#1
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	Re: $900 there should be enough travel for the converter to bolt up with out the spacers also make sure you have the converter locked in right by spinning it or you could f-up the trans real quick __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.