|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-09-2010, 07:04 PM
|
#1 |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
spedo cable question. please help
I have a 77 c10 with factory cruize in it. I took out all the cruize stuff under the hood and now I have a two pice spedo cable that obviously cant connect together. So I went to Orilies auto and had them look up my truck to get a solid one pice cable and thier system says that my truck did not come wiht out cruize lol. But they do have one instock for an 80 and a 75. same part number. ITs only $12 so i might get that one but first I wanted to know if there was any diffrences in the years as in length tranny input size or cluster input size. If not then all my problems of a bouncy spedo and ugly cruize parts are over. Thank you
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint |
|
|
|
08-09-2010, 07:49 PM
|
#2 |
|
Getting Old; Going Broke
Join Date: Apr 2010
Location: Owasso OK
Posts: 2,764
|
Re: spedo cable question. please help
Can't give any advice on the part you need, but I can comment on the "bouncy" aspect. I took the actual cable out of my speedometer cable and greased it, and then slid it back in place. Totally fixed mine going bouncy bouncy.
__________________
Why is every used 350 sbc out of a corvette? There's only two things that excite a man, expensive toys and real expensive toys. VEGETARIAN: That's an old Indian word meaning "I don't hunt so good." When the going gets tough, switch to power tools. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
