The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 GMT800 Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-27-2010, 07:51 PM   #1
COBALT
Senior Member
 
COBALT's Avatar
 
Join Date: Sep 2001
Location: Seattle, WA, USA
Posts: 5,817
Possible steering box problem

Over a year ago the '99 tahoe we inherited starting having steering problems. I had already looked it over pretty good when I first got it, but the noise in the steering one day got my attention. It turns out the ps pump was leaking badly, and the hoses appear to be worn out. It looked like a slow leak suddenly turning into a bad one. I checked the reservoir and sure enough it was pretty much empty. I filled it back up again just to see how long it would take to empty out - not long at all. That's really bad.

I replaced the pump and the lines without too much difficulty, and the steering felt 110 % better, but I noticed some play in the wheels now when I have them up on stands with the steering locked.

Both wheels can be moved a bit by pushing on one side of the tire while pulling on the other. This doesn't seem to be isolated at one wheel, and I was having a hard time identifying exactly what was wrong - the tie rods seem to be in pretty good shape. I managed to get down on my side and push the back of the wheel with my foot while pulling on the front, and watch the idler arm and steering linkage when I did this. The play is at the pitman arm. It looks as though the steering box is letting the wheels turn a bit.

Ok, so I'm thinking the steering box was probably damaged by that leak way back when. Thoughts?

Another issue that I found. If I push on the top of the wheel and pull on the bottom (and vice versa) there's a tiny bit of play as well, but it's more distinct - there's a bit of a clunk, and the exact same amount of movement on both sides. Pulling and pushing on the wheel in and out yields no movement, and I'm not hearing any wear when I spin the wheel at all, so I think the bearings are fine, but I'm worried about the upper/lower ball joints. I don't see any play in the A-arms when I do this either. I've seen bad ball joint wear on these 2wd suspensions, and this doesn't look familiar to me, but things aren't tight and that has me wondering.
__________________
'69 3/4 ton C20 2wd-350ci/TH400
'69 3/4 ton Custom 20 2wd-350ci/4sp Manual
'99 2wd 5.7 Chevy Tahoe
Seattle, WA.
COBALT is offline   Reply With Quote
Old 07-08-2010, 08:17 PM   #2
jamie72
Senior Member
 
jamie72's Avatar
 
Join Date: Apr 2000
Location: madison indiana
Posts: 3,839
Re: Possible steering box problem

sounds to me like ball joints,and other wore parts on the frint end, i really don`t think the gearbox would be hurt because of the leak.
__________________
jamie72
72 BB cheyenne -- Restoration getting started..

member #807



http://www.myspace.com/whitetailobsession
www.antlertalk.com
jamie72 is offline   Reply With Quote
Old 08-07-2010, 02:06 PM   #3
COBALT
Senior Member
 
COBALT's Avatar
 
Join Date: Sep 2001
Location: Seattle, WA, USA
Posts: 5,817
Re: Possible steering box problem

Quote:
Originally Posted by jamie72 View Post
sounds to me like ball joints,and other wore parts on the frint end, i really don`t think the gearbox would be hurt because of the leak.
You might be right - the only thing that bothers me is the amount of play in the steering output shaft when the steering wheel is locked, but there's also enough play in the wheels to make me think both sets of upper and lower ball joints might stand a replacement. Not sure about the tie rods. They seem to be ok, but I might as well replace them if I'm going to go through the trouble of replacing the ball joints...

Decisions decisions. I don't want to leave out the steering box if I'm going to have the front-end apart anyway.
__________________
'69 3/4 ton C20 2wd-350ci/TH400
'69 3/4 ton Custom 20 2wd-350ci/4sp Manual
'99 2wd 5.7 Chevy Tahoe
Seattle, WA.
COBALT is offline   Reply With Quote
Old 08-10-2010, 11:58 AM   #4
fxdxharley
Just a nother gear head
 
fxdxharley's Avatar
 
Join Date: Jul 2009
Location: Barrington NH
Posts: 501
Re: Possible steering box problem

the boxes are adjustable. there is a scrrew with a lock nut on the top of the steering box that is used to adjust the gears. my trk has the same play like yours. try adjusting the screw to tighten up the slop. If you have a a repair manual it tells you how to do it.
__________________
2013 HD FLHX
2000 chevy 2500 6.0l 4x4 3dr
2000 harley fxdx
71 Jimmy 4x4- future crawler/ woods rig
71 blazer (C4 2wd conv project) http://67-72chevytrucks.com/vboard/s...d.php?t=523589
fxdxharley is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com