Where's the best place to buy airbag kits - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Se7en Deuce · 08-09-2010, 07:21 PM

Im finally gettin all my parts together to start building my truck and I think I have decided to just do airbags now instead of later unless its a rediculous amount of money.

I have an ECE 4.5/6 static drop kit but I honestly dont think Ill be happy with the looks when im done and will end up changing it anyways

I dont know much about air bags and will prob have them prof. installed but I need help on where to look for good products ( full kits etc. )
Thanks in advance for any help

JNJchev77 · 08-09-2010, 07:38 PM

Check these guys out!!
http://www.airbagit.com/

ONLY KIDDING!! DO NOT, I REPEAT DO NOT TAKE A CHANCE WITH AIRBAGIT.COM

These guys are pretty good...
http://grunionfabrication.com/

Se7en Deuce · 08-09-2010, 07:47 PM

i figured id leave all the questions on what i need to the company im buying from thats why I didnt leave much info about my truck.

I just didnt know who yall reccomend me buying from
thanks for the heads up on airbagit

JNJchev77 · 08-09-2010, 07:59 PM

Probably a good idea... but you can find a ton of info on this forum. You may find someone locally as well that way you might save a little on shipping. There are some vendors on here that may be running specials too... Just be patient and you'll figure it out.

lowdownstar · 08-09-2010, 08:34 PM

Give Nathan a call at porter built street rods

Ray

**kev2809** · 08-09-2010, 08:53 PM

figure how low you want to go first. these trucks take a good chunk of money to lay frame, unless you can weld pretty good there are ways to get the frame on the ground without spending a whole lot of $$

if you dont want to lay frame, and want a basic setup, then its pretty simple..not a lot of work at all.

i got all of my stuff from suicidedoors and porterbuilt, 2 really good companies. avs is also pretty reputable.

PBFAB.COM · 08-09-2010, 09:57 PM

I would give Porterbuilt a call! (I am a little bias though)

FnLow69 · 08-09-2010, 11:43 PM

I think this whole forum is a little bias Nathan...lol J/k

JNJchev77 · 08-10-2010, 12:45 PM

Porterbuilt will take your truck to the next level.

*Shane* · 08-10-2010, 01:12 PM

www.***************** is a board vendor as well

tubbedII · 08-10-2010, 01:20 PM

Quote:

Originally Posted by kev2809

figure how low you want to go first.

Once you know this, any of the reputable board vendors will be able to help ya.

Se7en Deuce · 08-10-2010, 04:00 PM

ill give nate a call and go from there thanks fellas

08-09-2010, 07:21 PM	#1
Se7en Deuce Registered User Join Date: Jan 2010 Location: Covington, WA. Posts: 55	Where's the best place to buy airbag kits Im finally gettin all my parts together to start building my truck and I think I have decided to just do airbags now instead of later unless its a rediculous amount of money. I have an ECE 4.5/6 static drop kit but I honestly dont think Ill be happy with the looks when im done and will end up changing it anyways I dont know much about air bags and will prob have them prof. installed but I need help on where to look for good products ( full kits etc. ) Thanks in advance for any help __________________ Currently Owned: 71 cab 68 swb frame and bed 67 front clip 350/t350- posi 373 rear end

08-09-2010, 07:38 PM	#2
JNJchev77 Registered Cruiser Join Date: Mar 2010 Location: Mesa, AZ Posts: 918	Re: Where's the best place to buy airbag kits Check these guys out!! http://www.airbagit.com/ ONLY KIDDING!! DO NOT, I REPEAT DO NOT TAKE A CHANCE WITH AIRBAGIT.COM These guys are pretty good... http://grunionfabrication.com/

08-09-2010, 07:47 PM	#3
Se7en Deuce Registered User Join Date: Jan 2010 Location: Covington, WA. Posts: 55	Re: Where's the best place to buy airbag kits i figured id leave all the questions on what i need to the company im buying from thats why I didnt leave much info about my truck. I just didnt know who yall reccomend me buying from thanks for the heads up on airbagit __________________ Currently Owned: 71 cab 68 swb frame and bed 67 front clip 350/t350- posi 373 rear end

08-09-2010, 07:59 PM	#4
JNJchev77 Registered Cruiser Join Date: Mar 2010 Location: Mesa, AZ Posts: 918	Re: Where's the best place to buy airbag kits Probably a good idea... but you can find a ton of info on this forum. You may find someone locally as well that way you might save a little on shipping. There are some vendors on here that may be running specials too... Just be patient and you'll figure it out.

08-09-2010, 08:34 PM	#5
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 820	Re: Where's the best place to buy airbag kits Give Nathan a call at porter built street rods Ray

08-09-2010, 08:53 PM	#6
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,140	Re: Where's the best place to buy airbag kits figure how low you want to go first. these trucks take a good chunk of money to lay frame, unless you can weld pretty good there are ways to get the frame on the ground without spending a whole lot of $$ if you dont want to lay frame, and want a basic setup, then its pretty simple..not a lot of work at all. i got all of my stuff from suicidedoors and porterbuilt, 2 really good companies. avs is also pretty reputable. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-09-2010, 09:57 PM	#7
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Where's the best place to buy airbag kits I would give Porterbuilt a call! (I am a little bias though) __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

08-09-2010, 11:43 PM	#8
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: Where's the best place to buy airbag kits I think this whole forum is a little bias Nathan...lol J/k __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

08-10-2010, 12:45 PM	#9
JNJchev77 Registered Cruiser Join Date: Mar 2010 Location: Mesa, AZ Posts: 918	Re: Where's the best place to buy airbag kits Porterbuilt will take your truck to the next level.

08-10-2010, 01:12 PM	#10
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Where's the best place to buy airbag kits www.***************** is a board vendor as well

08-10-2010, 04:00 PM	#12
Se7en Deuce Registered User Join Date: Jan 2010 Location: Covington, WA. Posts: 55	Re: Where's the best place to buy airbag kits ill give nate a call and go from there thanks fellas __________________ Currently Owned: 71 cab 68 swb frame and bed 67 front clip 350/t350- posi 373 rear end



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.