CA Bunch of chrome, polished, dress up, upgrade engine components - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WellBilt Kustoms · 08-16-2010, 10:42 PM

We had all these parts ordered for a customers truck who we was doing a bunch of work on. Part of what we were doing was rebuilding the engine/trans, and dressing up everything under the hood along with doing some performance upgrades. Well the customer decided to back out of the project, and sell the truck.

So now I have a pretty good amount of new parts, that have never been installed which I need to get rid of. I'm selling these parts for less then what we picked them up for.

Here is what I know I have off the top of my head. I'm sure there are more, so if your looking for something related in particular, I might have it.
Everything is for a small block chevy.

-SBC shorty headers. *Stainless steel, fully tig welded. Not ceramic coated steel. These are fully polished and come with hardware, gaskets, and collectors. - $175
-Chrome 110 amp alternator. *3 wire type. Good upgrade to get more amps cranking to your battery - $90
-Chrome mechanical fuel pump - $50
-High torque starter. *I'm pretty sure this fits SBC and BBC. It has a 3HP motor on it. - $125
-Ready to run electronic distributor. *Fits SBC and BBC - $80
-Polished Aluminum, ball milled, tall valve covers. *standard side bolt, not center or long bolt - $80
-Polished Aluminum, ball milled, spark plug wire seperators - $45
-16 inch electric fan. *pushes 2200 CFM - $35
-Stainless steel radiator overflow tank. *Round with screw cap. Measures 3 inches in diameter, and is 10" long. - $40
-Aluminum radiator. *fully tig welded, has 1.5" top inlet, and 1.75" bottom outlet. Measures 28"W x 19"H x 3"D - $180
-Transmission Oil Cooler. *Finned design, single pass, 12" long - $45

If you have any questions, please let me know. I probably have more parts, so if your looking for something else, let me know. Or I might even have what your looking for tucked away in a container from one of my other projects that never got used.

You can email me at: WellBiltkustoms@aol.com, or call me at: (714) 585-9109

*ksjh1316* · 08-16-2010, 10:50 PM

If you can post a pic of the overflow container I might be interested

**leddzepp** · 08-16-2010, 10:51 PM

Got any drop components, like springs, shock relocater brackets? I am 20 mins from OC. Thanks.

murgg · 08-16-2010, 11:49 PM

pictures of the headers?, any water pump, intake? v-belt pulleys? may be interested in fuel pump/ alt too
email chris_murgg@hotmail.com thanks!

WellBilt Kustoms · 08-16-2010, 11:55 PM

Quote:

Originally Posted by ksjh1316

If you can post a pic of the overflow container I might be interested

Here is a picture of the same exact one I have. I was going to mount it in the same location as this one also. Fits perfect right there.

WellBilt Kustoms · 08-17-2010, 12:00 AM

Quote:

Originally Posted by leddzepp

Got any drop components, like springs, shock relocater brackets? I am 20 mins from OC. Thanks.

No I don't sorry. I just sold a set of drop spindles probably 3 weeks ago. I have a few sets of shocks, but thats about it as far as drop suspension components go.

WellBilt Kustoms · 08-17-2010, 12:06 AM

Quote:

Originally Posted by murgg

pictures of the headers?, any water pump, intake? v-belt pulleys? may be interested in fuel pump/ alt too
email chris_murgg@hotmail.com thanks!

I will try to get pictures of the headers posted up tomorrow. I do have a polished, high flow water pump. Is yours a short or long water pump?

I think I have an Edelbrock performer intake manifold that I took off of my other SBC few months back. I'll check and see and post a picture if I do.

I do have a full set of V-belt pulleys. All are aluminum. The water pump and power steering pump pulleys are single groove, and the crank pulley is double.

Let me know if you'd like to get the fuel pump and alternator. I might be able to knock off a few bucks if you get multiple items.

**Todd68Chevy** · 08-17-2010, 06:43 AM

Interested in pictures of the valve covers. Thanks, Todd

67gmcstepside · 08-17-2010, 07:17 AM

Ready to run electronic distributor. *Fits SBC and BBC - $80 Interested - what brand?

smokinstang70 · 08-17-2010, 07:19 AM

may be interested in the radiator and over flow tank... can you give me some more details? Manufacture? part number?

cypressbog · 08-17-2010, 12:44 PM

I'll purchase the high torque starter and the over flow tank. Please PM me paypal preferences.

*ksjh1316* · 08-17-2010, 01:08 PM

Just saw the pics and it looks good let me know about shipping to 67218 and how to pay you

WellBilt Kustoms · 08-17-2010, 02:40 PM

Hey guys, let me work on getting some pictures uploaded, and some shipping estimates going and I'll PM everyone who's interested shipping quotes and my paypal address.

Sorry for the delay.

jrmdigger72 · 08-17-2010, 03:10 PM

Interested in the fan assembly. Pictures?

billsbowtie · 08-17-2010, 03:58 PM

would like to see a pic. of spark plug wire seperators.

WellBilt Kustoms · 08-17-2010, 09:53 PM

Sorry guys. Wife took the camera, so I won't be able to post pictures until tomorrow. Sorry for the delay.

After going through more of my shelves and tupperware bins, I've stumbled across more parts. Here is what else I have for sale.

-Stainless steel overflow tank. 2" diameter by 13" tall - $35
-Stainless steel headers for 88-95 chevy truck. I'm not sure if these would fit onto earlier model SBC engines. If someone knows, please let me know. - $290
-H.E.I. Distributor for SBC/BBC, includes coil and has a clear cap (I've always liked the clear caps) - $90
-(2) slightly *USED* glass pack mufflers
-Sunpro triple gauge cluster. *Brand New in sealed box with all hardware and lines, ect. This is the kind you mount under your dash. Has a chrome plate that holds (3) 2" gauges. Has a water temp, volts, and oil pressure gauge. White face. - $25
-*USED* Hitch receiver block off plate. Its polished aluminum, and says " Size Does Matter" in black letters. Comes with a standard pin - $20
-*USED* old fuel cell. It works fine, just doesn't look pretty. It measures 22" x 16" x 8". - $40
-*USED* Eaton 8-lug rear end with stock panhard bar. This bolts right up to rear trailing arm suspension trucks. This rearend was under my 63 truck, and I pulled it out to swap to a newer 5 lug rear. Worked great when in use. - $250
-Stock Harrison Radiator out of 60's C10 pickup. Looks like it was patched in the top tank at one point, but works fine and doesn't leak. - $50

I'll update the list as I go through more of my stuff. And I will upload pictures of everything tomorrow for you guys.

Sammy · 08-17-2010, 10:33 PM

Interested in the 2X13 overflow tank. If it looks identical to the 3 " above. Brand of HEI?

brownge · 08-18-2010, 11:40 AM

Interested in either of the overflow tanks and the radiator if it gets to me. Would like to see pics of the radiator and brand/part #'s please.

cypressbog · 08-18-2010, 03:44 PM

Hello, Looks like Jeff is taking the 3" overflow. I'm still interested in the high torque starter. Please PM me final cost to 54304.

WellBilt Kustoms · 08-18-2010, 08:21 PM

Alright fella's. Sorry It's taken me so long to get these up, but here they are!

Let me know if you have any questions.

If your interested in purchasing an item, let me know along with your address, so I can get a shipping estimate out to you asap!

My paypal is: WellBiltkustoms@aol.com

Now on to the pics:

-Polished Aluminum, ball milled, tall valve covers. *standard side bolt, not center or long bolt - $80 *These come with the adapters to put into the breather holes if you want to run a breather.

The electric fan I have is actually a 14 inch, not 16. Sorry about that. But its a S-blade design, computer balanced curved blade, 2200 rpm. Comes with mounting hardware - $35

Also I have a Dual pack of Chrome Viair 480c compressors - Brand New! Comes with two compressors, steel braided lines with check valves, relays, fuse block, and a pressure switch. - $375

WellBilt Kustoms · 08-18-2010, 08:32 PM

(2) 5 gallon quad port air tanks. There 1/2" port with two drain ports. - $65 each.

High torque starter. Fits SBC and BBC. 3HP motor on it. I thought it was black, but its red and chrome. - $125

Ready to run electronic distributor. *Fits SBC and BBC. Has Red cap - $80

Polished Aluminum, ball milled, spark plug wire seperators with hardware - $45

WellBilt Kustoms · 08-18-2010, 08:48 PM

Aluminum radiator. *Fully TIG welded, has 1.5" top inlet, and 1.75" bottom outlet. Measures 27"W x 19"H x 3"D - $180

Stainless steel radiator overflow tank. *Round with screw cap. Measures 3 inches in diameter, and is 10" long. (w/mounting hardware) - $40

Stainless steel overflow tank. 2" diameter by 13" tall (w/mounting hardware) - $35

Transmission Oil Cooler. *Finned design, single pass, 12" long - $45

Sammy · 08-18-2010, 09:32 PM

Need shipping and total for 2 X13 overflow plus the ball milled wire seperators to 63628. Thanks

Sammy · 08-18-2010, 09:35 PM

If someone hadn't already spoke for the rad I would be interested if the size was right sounds like a deal.

**Todd68Chevy** · 08-18-2010, 09:40 PM

Quote:

Originally Posted by Todd68Chevy

Interested in pictures of the valve covers. Thanks, Todd

I will pass on the valve covers. Thanks for the pictures. Todd

08-16-2010, 10:42 PM	#1
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Bunch of chrome, polished, dress up, upgrade engine components We had all these parts ordered for a customers truck who we was doing a bunch of work on. Part of what we were doing was rebuilding the engine/trans, and dressing up everything under the hood along with doing some performance upgrades. Well the customer decided to back out of the project, and sell the truck. So now I have a pretty good amount of new parts, that have never been installed which I need to get rid of. I'm selling these parts for less then what we picked them up for. Here is what I know I have off the top of my head. I'm sure there are more, so if your looking for something related in particular, I might have it. Everything is for a small block chevy. -SBC shorty headers. Stainless steel, fully tig welded. Not ceramic coated steel. These are fully polished and come with hardware, gaskets, and collectors. - $175 -Chrome 110 amp alternator. 3 wire type. Good upgrade to get more amps cranking to your battery - $90 -Chrome mechanical fuel pump - $50 -High torque starter. I'm pretty sure this fits SBC and BBC. It has a 3HP motor on it. - $125 -Ready to run electronic distributor. Fits SBC and BBC - $80 -Polished Aluminum, ball milled, tall valve covers. standard side bolt, not center or long bolt - $80 -Polished Aluminum, ball milled, spark plug wire seperators - $45 -16 inch electric fan. pushes 2200 CFM - $35 -Stainless steel radiator overflow tank. Round with screw cap. Measures 3 inches in diameter, and is 10" long. - $40 -Aluminum radiator. fully tig welded, has 1.5" top inlet, and 1.75" bottom outlet. Measures 28"W x 19"H x 3"D - $180 -Transmission Oil Cooler. *Finned design, single pass, 12" long - $45 If you have any questions, please let me know. I probably have more parts, so if your looking for something else, let me know. Or I might even have what your looking for tucked away in a container from one of my other projects that never got used. You can email me at: WellBiltkustoms@aol.com, or call me at: (714) 585-9109

08-16-2010, 10:50 PM	#2
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Bunch of chrome, polished, dress up, upgrade engine components If you can post a pic of the overflow container I might be interested

08-16-2010, 10:51 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,020	Re: Bunch of chrome, polished, dress up, upgrade engine components Got any drop components, like springs, shock relocater brackets? I am 20 mins from OC. Thanks. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

08-16-2010, 11:49 PM	#4
murgg Registered User Join Date: May 2010 Location: british columbia Posts: 36	Re: Bunch of chrome, polished, dress up, upgrade engine components pictures of the headers?, any water pump, intake? v-belt pulleys? may be interested in fuel pump/ alt too email chris_murgg@hotmail.com thanks!

08-17-2010, 06:43 AM	#8
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Bunch of chrome, polished, dress up, upgrade engine components Interested in pictures of the valve covers. Thanks, Todd __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

08-17-2010, 07:17 AM	#9
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: Bunch of chrome, polished, dress up, upgrade engine components Ready to run electronic distributor. *Fits SBC and BBC - $80 Interested - what brand?

08-17-2010, 07:19 AM	#10
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Bunch of chrome, polished, dress up, upgrade engine components may be interested in the radiator and over flow tank... can you give me some more details? Manufacture? part number?

08-17-2010, 12:44 PM	#11
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: Bunch of chrome, polished, dress up, upgrade engine components I'll purchase the high torque starter and the over flow tank. Please PM me paypal preferences.

08-17-2010, 01:08 PM	#12
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Bunch of chrome, polished, dress up, upgrade engine components Just saw the pics and it looks good let me know about shipping to 67218 and how to pay you

08-17-2010, 02:40 PM	#13
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: Bunch of chrome, polished, dress up, upgrade engine components Hey guys, let me work on getting some pictures uploaded, and some shipping estimates going and I'll PM everyone who's interested shipping quotes and my paypal address. Sorry for the delay.

08-17-2010, 03:10 PM	#14
jrmdigger72 Registered User Join Date: Mar 2008 Location: Young America, MN Posts: 44	Re: Bunch of chrome, polished, dress up, upgrade engine components Interested in the fan assembly. Pictures?

08-17-2010, 03:58 PM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Bunch of chrome, polished, dress up, upgrade engine components would like to see a pic. of spark plug wire seperators. __________________ i have 67/72 chevy truck parts f/s.

08-17-2010, 09:53 PM	#16
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: Bunch of chrome, polished, dress up, upgrade engine components Sorry guys. Wife took the camera, so I won't be able to post pictures until tomorrow. Sorry for the delay. After going through more of my shelves and tupperware bins, I've stumbled across more parts. Here is what else I have for sale. -Stainless steel overflow tank. 2" diameter by 13" tall - $35 -Stainless steel headers for 88-95 chevy truck. I'm not sure if these would fit onto earlier model SBC engines. If someone knows, please let me know. - $290 -H.E.I. Distributor for SBC/BBC, includes coil and has a clear cap (I've always liked the clear caps) - $90 -(2) slightly USED glass pack mufflers -Sunpro triple gauge cluster. Brand New in sealed box with all hardware and lines, ect. This is the kind you mount under your dash. Has a chrome plate that holds (3) 2" gauges. Has a water temp, volts, and oil pressure gauge. White face. - $25 -USED* Hitch receiver block off plate. Its polished aluminum, and says " Size Does Matter" in black letters. Comes with a standard pin - $20 -USED old fuel cell. It works fine, just doesn't look pretty. It measures 22" x 16" x 8". - $40 -USED Eaton 8-lug rear end with stock panhard bar. This bolts right up to rear trailing arm suspension trucks. This rearend was under my 63 truck, and I pulled it out to swap to a newer 5 lug rear. Worked great when in use. - $250 -Stock Harrison Radiator out of 60's C10 pickup. Looks like it was patched in the top tank at one point, but works fine and doesn't leak. - $50 I'll update the list as I go through more of my stuff. And I will upload pictures of everything tomorrow for you guys.

08-17-2010, 10:33 PM	#17
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Bunch of chrome, polished, dress up, upgrade engine components Interested in the 2X13 overflow tank. If it looks identical to the 3 " above. Brand of HEI? __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

08-18-2010, 11:40 AM	#18
brownge Registered User Join Date: Jun 2008 Location: Magnolia, TX Posts: 224	Re: Bunch of chrome, polished, dress up, upgrade engine components Interested in either of the overflow tanks and the radiator if it gets to me. Would like to see pics of the radiator and brand/part #'s please.



Register or Log In To remove these advertisements.

08-18-2010, 03:44 PM	#19
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: Bunch of chrome, polished, dress up, upgrade engine components Hello, Looks like Jeff is taking the 3" overflow. I'm still interested in the high torque starter. Please PM me final cost to 54304.

08-18-2010, 08:21 PM	#20
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: Bunch of chrome, polished, dress up, upgrade engine components Alright fella's. Sorry It's taken me so long to get these up, but here they are! Let me know if you have any questions. If your interested in purchasing an item, let me know along with your address, so I can get a shipping estimate out to you asap! My paypal is: WellBiltkustoms@aol.com Now on to the pics: -Polished Aluminum, ball milled, tall valve covers. standard side bolt, not center or long bolt - $80 These come with the adapters to put into the breather holes if you want to run a breather. The electric fan I have is actually a 14 inch, not 16. Sorry about that. But its a S-blade design, computer balanced curved blade, 2200 rpm. Comes with mounting hardware - $35 Also I have a Dual pack of Chrome Viair 480c compressors - Brand New! Comes with two compressors, steel braided lines with check valves, relays, fuse block, and a pressure switch. - $375

08-18-2010, 08:32 PM	#21
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: Bunch of chrome, polished, dress up, upgrade engine components (2) 5 gallon quad port air tanks. There 1/2" port with two drain ports. - $65 each. High torque starter. Fits SBC and BBC. 3HP motor on it. I thought it was black, but its red and chrome. - $125 Ready to run electronic distributor. *Fits SBC and BBC. Has Red cap - $80 Polished Aluminum, ball milled, spark plug wire seperators with hardware - $45

08-18-2010, 08:48 PM	#22
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: Bunch of chrome, polished, dress up, upgrade engine components Aluminum radiator. Fully TIG welded, has 1.5" top inlet, and 1.75" bottom outlet. Measures 27"W x 19"H x 3"D - $180 Stainless steel radiator overflow tank. Round with screw cap. Measures 3 inches in diameter, and is 10" long. (w/mounting hardware) - $40 Stainless steel overflow tank. 2" diameter by 13" tall (w/mounting hardware) - $35 Transmission Oil Cooler. *Finned design, single pass, 12" long - $45

08-18-2010, 09:32 PM	#23
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Bunch of chrome, polished, dress up, upgrade engine components Need shipping and total for 2 X13 overflow plus the ball milled wire seperators to 63628. Thanks __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

08-18-2010, 09:35 PM	#24
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Bunch of chrome, polished, dress up, upgrade engine components If someone hadn't already spoke for the rad I would be interested if the size was right sounds like a deal. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

Register or Log In To remove these advertisements.