NC LH Ram Horn's Exhaust Manifold - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brn agn · 08-21-2010, 07:16 PM

I have a driver's side ram horn exhaust manifold for sale. There are no cracks, but the studs will need to be replaced. It came from my 1969 C10. I would like $25 plus shipping.

TexC-10 · 08-22-2010, 05:02 PM

Do you know if the stud replacement is a hard job? Shipping to 75117? I might be interested if it isn't too much. Thanks.

brn agn · 08-22-2010, 06:47 PM

I just finished replacing studs on two other manifolds. This is the technique I used:

Soaked the studs in penetrating oil for a couple of days.
Weld a nut to the base of each stud.
While the stud is still hot, unthread it using a deep well socket and ratchet.

The heat from the welding helps break loose the studs from the manifold. Replacement stud kits (3 pack) can be purchased from any reputable parts store for about $5.

I can ship it to you for $37 total ($12 shipping). If the stud replacement is a deal breaker, I can extract the old studs prior to shipping it.

TexC-10 · 08-22-2010, 11:13 PM

I'll take it. If you could take them out that would be great. I'll send you a message with my info. Thanks.

08-21-2010, 07:16 PM	#1
brn agn Registered User Join Date: Mar 2009 Location: Youngsville, NC Posts: 952	LH Ram Horn's Exhaust Manifold I have a driver's side ram horn exhaust manifold for sale. There are no cracks, but the studs will need to be replaced. It came from my 1969 C10. I would like $25 plus shipping. __________________ 1969 C10 SWB Project Charity Case AKA "Roscoe" 1971 Cheyenne Super A Combined Effort The Service Station-A practical ministry for those in need

08-22-2010, 05:02 PM	#2
TexC-10 Registered User Join Date: Jan 2009 Location: Edgewood Texas Posts: 46	Re: LH Ram Horn's Exhaust Manifold Do you know if the stud replacement is a hard job? Shipping to 75117? I might be interested if it isn't too much. Thanks. __________________ 1972 C/10 mutt.

08-22-2010, 06:47 PM	#3
brn agn Registered User Join Date: Mar 2009 Location: Youngsville, NC Posts: 952	Re: LH Ram Horn's Exhaust Manifold I just finished replacing studs on two other manifolds. This is the technique I used: Soaked the studs in penetrating oil for a couple of days. Weld a nut to the base of each stud. While the stud is still hot, unthread it using a deep well socket and ratchet. The heat from the welding helps break loose the studs from the manifold. Replacement stud kits (3 pack) can be purchased from any reputable parts store for about $5. I can ship it to you for $37 total ($12 shipping). If the stud replacement is a deal breaker, I can extract the old studs prior to shipping it. __________________ 1969 C10 SWB Project Charity Case AKA "Roscoe" 1971 Cheyenne Super A Combined Effort The Service Station-A practical ministry for those in need

08-22-2010, 11:13 PM	#4
TexC-10 Registered User Join Date: Jan 2009 Location: Edgewood Texas Posts: 46	Re: LH Ram Horn's Exhaust Manifold I'll take it. If you could take them out that would be great. I'll send you a message with my info. Thanks. __________________ 1972 C/10 mutt.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.