Need Source for u-Bolts for 2" Lowering Blocks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

toomanytoyz · 05-27-2009, 06:27 PM

I have a pair of 2" Alum. Blocks i bought off another member w/out the u-bolts, I want to use them on my Stepper due to Rake it has with the 3/5 Drop. Anyone know a Source for just the -bolts?

Thanks, Rick

caja_larga · 05-27-2009, 06:33 PM

pepboys had some when I was there the other day check woth them. Also a spring shop can make them for you.

tcb-1 · 05-27-2009, 07:09 PM

Rick,
if you can't find the size you want over the counter, your best bet for custom bent u-bolts is a big rig repair shop. probably several up in Fort Wayne. I've had several sets made at this type of business on the cheap!!

Skirkpat · 05-27-2009, 08:32 PM

We have a spring shop here that can bend them up custom, If you pay shipping I will pick them up and ship them if you can't find them local. I think they were about 7.00 a piece last time I had a set bent?

cdowns · 05-27-2009, 08:38 PM

almost any autoparts store can get them if you have the measurements also spring shops

Skirkpat · 05-27-2009, 08:40 PM

http://www.generalspringkc.com/index.php
This is not the place , but same deal?

toomanytoyz · 05-27-2009, 08:51 PM

Thanks for all the Input, I was able to find a Set Local that was the Right Lenght but not the Right Size diameter wise. Was afraid that to much slop would cause a problem with rear Axle.

I will have to dbl check, But i Think what i need is like 5/8 Diameter & What i bought was 9/16? The truck is at my Buddies Shop & I will check the u-bolts i Bought Tomorrow for diameter.........

I do Remember the length i bought was 12".........

Skirkpat, I Really Appreciate the Offer & Will Keep in Touch .

Thanks, Rick

1968SWBBigBlock · 05-27-2009, 10:36 PM

Rick - let me know if you want some picked up & shipped - I just had a pair bent for my son's S10 ($27.00 for all 4)
Came with HD nuts and washers
I am going back on Thursday or Friday to pick up another set for another project
I will need Diameter, over all length & width or span

toomanytoyz · 06-01-2009, 09:11 PM

Quote:

Originally Posted by 1968SWBBigBlock

Rick - let me know if you want some picked up & shipped - I just had a pair bent for my son's S10 ($27.00 for all 4)
Came with HD nuts and washers
I am going back on Thursday or Friday to pick up another set for another project
I will need Diameter, over all length & width or span

Have you made your Return Trip Yet? If Not, I Need 2 of them .....

3/4 Diam x12 long with a span of 3 & 1/2.........

Just let me know........

Thanks, Rick

1968SWBBigBlock · 06-01-2009, 09:35 PM

PM sent

toomanytoyz · 06-05-2009, 11:18 AM

Ubolts came yesterday, Thanks a Bunch for Doing this for Me, Rep Points your Way...........

Money order went out Today........

Thanks, Rick

big_al_71 · 06-05-2009, 01:07 PM

Please post picts of your truck once you install them, to see how much of a difference it makes...
thanks
Al

toomanytoyz · 06-16-2009, 08:10 PM

Quote:

Originally Posted by big_al_71

Please post picts of your truck once you install them, to see how much of a difference it makes...
thanks
Al

Here is a before & After Pic , Quite Pleased with the Stance since adding the Blocks........

Many Thanks go out to Bill for going out of his way to get the Bolts for me.....

Rick

oldblue1968chevy · 06-16-2009, 10:09 PM

much better, thats on my things to do list...cheap and levels it out

big_al_71 · 06-17-2009, 08:15 AM

thanks for posting the picts!!!!!
definetly much better....

my67chevytruck · 06-17-2009, 09:02 AM

Rick, truck is looking good....

Skirkpat · 06-17-2009, 09:15 AM

Scwing...Looking alot better, Red shorty's just look good.

gcburdic · 06-17-2009, 11:26 AM

Hey Rick,

quick question from a rookie....how/ where do you install the blocks??....also, is there anything special that needs to be done to relocate the shocks or panhard bar??

Thanks.....by the way did those bumper brackets work out for you??

72BlckButy · 06-17-2009, 01:58 PM

The truck looks great Rick!

Tx Firefighter · 06-17-2009, 07:48 PM

Quote:

Originally Posted by gcburdic

Hey Rick,

quick question from a rookie....how/ where do you install the blocks??....also, is there anything special that needs to be done to relocate the shocks or panhard bar??

Thanks.....by the way did those bumper brackets work out for you??

I did an FAQ article on lowering blocks with lots of good pictures. Check in the FAQ section.

toomanytoyz · 06-17-2009, 07:48 PM

Quote:

Originally Posted by gcburdic

Hey Rick,

quick question from a rookie....how/ where do you install the blocks??....also, is there anything special that needs to be done to relocate the shocks or panhard bar??

Thanks.....by the way did those bumper brackets work out for you??

The blocks just fit b-tween axle & Trailing arm, I allready had the shock relocation kit & Super panhard bar installed for my 5" Drop springs..........

The Brkts are waiting for powdercoat & will then install bumper, Thanks Again for the Great Buy on the Brkts.......

Rick

gcburdic · 06-17-2009, 10:12 PM

Quote:

Originally Posted by Tx Firefighter

I did an FAQ article on lowering blocks with lots of good pictures. Check in the FAQ section.

Thanks Tx FF....you are always a very helpful member!!!!+1

Quote:

Originally Posted by toomanytoyz

The blocks just fit b-tween axle & Trailing arm, I allready had the shock relocation kit & Super panhard bar installed for my 5" Drop springs..........
The Brkts are waiting for powdercoat & will then install bumper, Thanks Again for the Great Buy on the Brkts.......
Rick

Cool Rick...thanks for this info...I'll go check that FAQ thread out....
Glad those brackets worked out....Looking forward to seeing this rollin'!!!!+1

Cruisin' Oklahoma · 07-25-2010, 12:05 PM

Hey toomanytoyz,

just wondering if you could give me a measurement after you installed the lowering blocks from the ground to the fender well on the front and back? thx.

jeremy

**BIG ORANGE** · 07-25-2010, 12:15 PM

Hey looks good, great stance! I like it when member's help member's, isnt that what is all about?!?!

bamabronc · 08-23-2010, 10:34 PM

Quote:

Originally Posted by Cruisin' Oklahoma

Hey toomanytoyz,

just wondering if you could give me a measurement after you installed the lowering blocks from the ground to the fender well on the front and back? thx.

jeremy

I am interested in this measurement too

05-27-2009, 06:27 PM	#1
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Need Source for u-Bolts for 2" Lowering Blocks I have a pair of 2" Alum. Blocks i bought off another member w/out the u-bolts, I want to use them on my Stepper due to Rake it has with the 3/5 Drop. Anyone know a Source for just the -bolts? Thanks, Rick Attached Images __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

05-27-2009, 06:33 PM	#2
caja_larga Registered User Join Date: Oct 2007 Location: Tucson, Az Posts: 172	Re: Need Source for u-Bolts for 2" Lowering Blocks pepboys had some when I was there the other day check woth them. Also a spring shop can make them for you.

05-27-2009, 07:09 PM	#3
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Need Source for u-Bolts for 2" Lowering Blocks Rick, if you can't find the size you want over the counter, your best bet for custom bent u-bolts is a big rig repair shop. probably several up in Fort Wayne. I've had several sets made at this type of business on the cheap!! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

05-27-2009, 08:32 PM	#4
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: Need Source for u-Bolts for 2" Lowering Blocks We have a spring shop here that can bend them up custom, If you pay shipping I will pick them up and ship them if you can't find them local. I think they were about 7.00 a piece last time I had a set bent?

05-27-2009, 08:38 PM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Need Source for u-Bolts for 2" Lowering Blocks almost any autoparts store can get them if you have the measurements also spring shops __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

05-27-2009, 08:40 PM	#6
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: Need Source for u-Bolts for 2" Lowering Blocks http://www.generalspringkc.com/index.php This is not the place , but same deal?

05-27-2009, 08:51 PM	#7
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Need Source for u-Bolts for 2" Lowering Blocks Thanks for all the Input, I was able to find a Set Local that was the Right Lenght but not the Right Size diameter wise. Was afraid that to much slop would cause a problem with rear Axle. I will have to dbl check, But i Think what i need is like 5/8 Diameter & What i bought was 9/16? The truck is at my Buddies Shop & I will check the u-bolts i Bought Tomorrow for diameter......... I do Remember the length i bought was 12"......... Skirkpat, I Really Appreciate the Offer & Will Keep in Touch . Thanks, Rick __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

05-27-2009, 10:36 PM	#8
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Need Source for u-Bolts for 2" Lowering Blocks Rick - let me know if you want some picked up & shipped - I just had a pair bent for my son's S10 ($27.00 for all 4) Came with HD nuts and washers I am going back on Thursday or Friday to pick up another set for another project I will need Diameter, over all length & width or span __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

06-01-2009, 09:35 PM	#10
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Need Source for u-Bolts for 2" Lowering Blocks PM sent __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

06-05-2009, 11:18 AM	#11
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Need Source for u-Bolts for 2" Lowering Blocks Ubolts came yesterday, Thanks a Bunch for Doing this for Me, Rep Points your Way........... Money order went out Today........ Thanks, Rick __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

06-05-2009, 01:07 PM	#12
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Need Source for u-Bolts for 2" Lowering Blocks Please post picts of your truck once you install them, to see how much of a difference it makes... thanks Al __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

06-16-2009, 10:09 PM	#14
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Need Source for u-Bolts for 2" Lowering Blocks much better, thats on my things to do list...cheap and levels it out __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

06-17-2009, 08:15 AM	#15
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Need Source for u-Bolts for 2" Lowering Blocks thanks for posting the picts!!!!! definetly much better.... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

06-17-2009, 09:02 AM	#16
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Need Source for u-Bolts for 2" Lowering Blocks Rick, truck is looking good.... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

06-17-2009, 09:15 AM	#17
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: Need Source for u-Bolts for 2" Lowering Blocks Scwing...Looking alot better, Red shorty's just look good.



Register or Log In To remove these advertisements.

06-17-2009, 11:26 AM	#18
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Need Source for u-Bolts for 2" Lowering Blocks Hey Rick, quick question from a rookie....how/ where do you install the blocks??....also, is there anything special that needs to be done to relocate the shocks or panhard bar?? Thanks.....by the way did those bumper brackets work out for you?? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

06-17-2009, 01:58 PM	#19
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Need Source for u-Bolts for 2" Lowering Blocks The truck looks great Rick! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

07-25-2010, 12:05 PM	#23
Cruisin' Oklahoma Registered User Join Date: May 2010 Location: Skiatook, Oklahoma Posts: 27	Re: Need Source for u-Bolts for 2" Lowering Blocks Hey toomanytoyz, just wondering if you could give me a measurement after you installed the lowering blocks from the ground to the fender well on the front and back? thx. jeremy __________________ 69' Stepside, 350SB/TH350, Holley 600 4 Barrel, Headers, Edelbrock Intake, Valve Covers, and Breather, 275/60 R15's, Disc Brake conversion. "For we know that God works all things for the good of those that love Him, to those that are called according to His purpose." --Romans 8:28 Last edited by Cruisin' Oklahoma; 07-25-2010 at 12:06 PM.

07-25-2010, 12:15 PM	#24
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,752	Re: Need Source for u-Bolts for 2" Lowering Blocks Hey looks good, great stance! I like it when member's help member's, isnt that what is all about?!?! __________________ Things happen for a reason!

Register or Log In To remove these advertisements.