who sells mounts for 350 engine 67 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brans72 · 08-23-2010, 05:30 PM

I am needing to find who sells the engine mounts that bolt to the frame to do a 350 engine swap? Thanks Brandon

Sammy · 08-23-2010, 08:34 PM

Check the parts board several folks there parting out trucks.

raycow · 08-24-2010, 04:03 PM

Quote:

Originally Posted by brans72

I am needing to find who sells the engine mounts that bolt to the frame to do a 350 engine swap? Thanks Brandon

You can use the frame brackets that came with the truck unless the previous engine was a 292. In that case, replace only the passenger side bracket with one for a 250 or a V-8 (they both use the same bracket).

Ray

67Slider · 08-24-2010, 04:41 PM

__

**'70_402** · 08-24-2010, 05:53 PM

you can get the motor mounts (rubber) at the parts store.

brans72 · 08-25-2010, 07:55 AM

saying you can use 250l engine frame mounts for a 350 engine swap? Meaning the engine frame mount that is bolted to frame and stays in truck when you pull the engine?

raycow · 08-25-2010, 03:16 PM

Quote:

Originally Posted by brans72

saying you can use 250l engine frame mounts for a 350 engine swap? Meaning the engine frame mount that is bolted to frame and stays in truck when you pull the engine?

Yes, they are the same. You can re-use the rubber mount too if it is in good condition.

Ray

ROBO66 · 08-25-2010, 04:18 PM

Motor mount brackets are the same if the previous engine was a SBC. If not, check your local junk yard. Any 67-72 Chevrolet motor mount bracket (frame to front cross member) for a SBC will work. The engine and bracket mounts can be purchased at the parts store.

**FRENCHBLUE72** · 08-25-2010, 07:07 PM

I have seen lots of em for sale on the parts board..

08-23-2010, 05:30 PM	#1
brans72 Registered User Join Date: Dec 2009 Location: Durham,NC Posts: 636	who sells mounts for 350 engine 67 C10 I am needing to find who sells the engine mounts that bolt to the frame to do a 350 engine swap? Thanks Brandon

08-23-2010, 08:34 PM	#2
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: who sells mounts for 350 engine 67 C10 Check the parts board several folks there parting out trucks. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

08-24-2010, 04:41 PM	#4
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: who sells mounts for 350 engine 67 C10 __ __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500 Last edited by 67Slider; 08-24-2010 at 04:43 PM.

08-24-2010, 05:53 PM	#5
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	Re: who sells mounts for 350 engine 67 C10 you can get the motor mounts (rubber) at the parts store. __________________ https://www.ebay.com/itm/295742064443

08-25-2010, 07:55 AM	#6
brans72 Registered User Join Date: Dec 2009 Location: Durham,NC Posts: 636	Re: who sells mounts for 350 engine 67 C10 saying you can use 250l engine frame mounts for a 350 engine swap? Meaning the engine frame mount that is bolted to frame and stays in truck when you pull the engine?

08-25-2010, 04:18 PM	#8
ROBO66 Registered User Join Date: May 2008 Location: Republic, Missouri Posts: 30	Re: who sells mounts for 350 engine 67 C10 Motor mount brackets are the same if the previous engine was a SBC. If not, check your local junk yard. Any 67-72 Chevrolet motor mount bracket (frame to front cross member) for a SBC will work. The engine and bracket mounts can be purchased at the parts store.

08-25-2010, 07:07 PM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	Re: who sells mounts for 350 engine 67 C10 I have seen lots of em for sale on the parts board.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.