Picture of my new 69 C20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ddsmith · 06-04-2003, 09:22 PM

As requested here are some pictures. Unfortunately the weather still stinks. Most shots are from the undercarriage. I'll post more later when the weather gets better.

Longhorn Man · 06-04-2003, 10:38 PM

Webshots won't host pics these days. Eve so, with my secret decoder ring I can see that it is a green fleet truck with a nice underside and leaf springs.

I use http://www.digitalpose.com/ for my pic hosting these days.

*Gee_Emm* · 06-04-2003, 10:47 PM

Hey is that the one from ebay a while back?

Whats with all the underneath pictures? :p

toms68cst · 06-04-2003, 11:22 PM

Well, The underside looks pretty nice! Nice anti-sway bar.

ddsmith · 06-05-2003, 12:36 AM

Sorry about the pictures. It's getting hard to find a free picture host. Thanks Longhornmail for the link. I'll try and use them for future pictures. It was such a rotten day outside that I figured I would take the underside pictures. This truck was west coast all it's life in California and Oregon. Now I'm going to torture it to the Northeast US. I'll post some nice body shots when the weather gets better. Gee-Emm that is the one from E-bay that I bought. It is pretty much rust free with a few small exceptions. The bottom of the door is rusty you know the spot where the drain holes are. You can see it if you have Longhornmails special webshots decoder ring. Unlike some fellow board members I plan on keeping this truck at it's current height, with the original wheels, and only plan small upgrades. Maybe a HEI since I have a spare laying around. The dash has already been molested for the installation of an eight track, cb, and radio all in one unit. That has to go. The A/C compressor is gone and I'm going to have to decide whether to try and put the original all back or go with an Old Air one from GMC Pauls. The ventilation control panel seems like it needs some attention. At least I welded up the alternator bracket that broke today and installed it during the rain breaks. I found the build sheet under the seat today. It was in pieces but it was there.

*Gee_Emm* · 06-05-2003, 09:06 AM

Good to hear

Time to flush out all those drain holes in the fenders, cowl, bed, doors :p

06-04-2003, 09:22 PM	#1
ddsmith Glowing since 1978 Join Date: Mar 2001 Location: Lusby,MD,USA Posts: 532	Picture of my new 69 C20 As requested here are some pictures. Unfortunately the weather still stinks. Most shots are from the undercarriage. I'll post more later when the weather gets better. __________________ 66 Chevy C30 Stakebody Dump, PS,PB, 327cu in 71 Corvette Coupe 454 4 speed 69 Chevy C20 Custom Camper

06-04-2003, 11:22 PM	#4
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,286	Well, The underside looks pretty nice! Nice anti-sway bar. __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

06-05-2003, 12:36 AM	#5
ddsmith Glowing since 1978 Join Date: Mar 2001 Location: Lusby,MD,USA Posts: 532	Sorry about the pictures. It's getting hard to find a free picture host. Thanks Longhornmail for the link. I'll try and use them for future pictures. It was such a rotten day outside that I figured I would take the underside pictures. This truck was west coast all it's life in California and Oregon. Now I'm going to torture it to the Northeast US. I'll post some nice body shots when the weather gets better. Gee-Emm that is the one from E-bay that I bought. It is pretty much rust free with a few small exceptions. The bottom of the door is rusty you know the spot where the drain holes are. You can see it if you have Longhornmails special webshots decoder ring. Unlike some fellow board members I plan on keeping this truck at it's current height, with the original wheels, and only plan small upgrades. Maybe a HEI since I have a spare laying around. The dash has already been molested for the installation of an eight track, cb, and radio all in one unit. That has to go. The A/C compressor is gone and I'm going to have to decide whether to try and put the original all back or go with an Old Air one from GMC Pauls. The ventilation control panel seems like it needs some attention. At least I welded up the alternator bracket that broke today and installed it during the rain breaks. I found the build sheet under the seat today. It was in pieces but it was there. __________________ 66 Chevy C30 Stakebody Dump, PS,PB, 327cu in 71 Corvette Coupe 454 4 speed 69 Chevy C20 Custom Camper

06-04-2003, 10:38 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Webshots won't host pics these days. Eve so, with my secret decoder ring I can see that it is a green fleet truck with a nice underside and leaf springs. I use http://www.digitalpose.com/ for my pic hosting these days.

06-04-2003, 10:47 PM	#3
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Hey is that the one from ebay a while back? Whats with all the underneath pictures? :p

06-05-2003, 09:06 AM	#6
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Good to hear Time to flush out all those drain holes in the fenders, cowl, bed, doors :p



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.