frenched in my side markers today

[colin_havens]

I saw your truck at Showfest a couple of months ago. Looks great, with some suttle mods that you wouldnt notice unless you are into these trucks. It really made me wish I could have brought mine down. Are you coming to ///RA this weekend in Millington?

[ChevLoRay]

You know you could market those taillight "rings", right?

[Nova70]

Originally Posted by ChevLoRay

You know you could market those taillight "rings", right?

I'd buy a set.

[avysittinon22s]

Originally Posted by ChevLoRay

You know you could market those taillight "rings", right?

If I ever get my cnc software worked out , Ill get a membership and market them.

[c10seconds]

Originally Posted by avysittinon22s

If I ever get my cnc software worked out , Ill get a membership and market them.

Do it! Those are some nice pieces! I just bought some that look very similar from marquez designs. $250!!

I think they would be a great seller! Nice truck!

[mcbassin]

Originally Posted by avysittinon22s

If I ever get my cnc software worked out , Ill get a membership and market them.

I have CNC software at work, what do you need Fanuc? G-code, conversational? Do you have drawings or models? I would love to help if possible. Let me know

[kcfirstbuild]

OK so frenching the side markers is the greatest idea ever ! I have a 1968 c-10 can i french my original side markers or do i have to use the later model side markers?

[avysittinon22s]

Originally Posted by mcbassin

I have CNC software at work, what do you need Fanuc? G-code, conversational? Do you have drawings or models? I would love to help if possible. Let me know

Im using BobCad software on a Bridgeport machine. I have the post for my machine but doesnt use correct G codes or indicate clockwise or counter clockwise. Ive tried a few other posts and still doesnt do it correctly. I havnt messed with it in a while.

[mcbassin]

Originally Posted by avysittinon22s

Im using BobCad software on a Bridgeport machine. I have the post for my machine but doesnt use correct G codes or indicate clockwise or counter clockwise. Ive tried a few other posts and still doesnt do it correctly. I havnt messed with it in a while.

I use Featurecam and an older version of Mastercam. I have a good post for Bridgeport machines. In fact, I have torq cut 2 machine that we use every day. If you have any drawings I can make good g-code for you to try. Let me know if I can help you.

[avysittinon22s]

Originally Posted by colin_havens

I saw your truck at Showfest a couple of months ago. Looks great, with some suttle mods that you wouldnt notice unless you are into these trucks. It really made me wish I could have brought mine down. Are you coming to ///RA this weekend in Millington?

Thanks, Ill be at Millington for sure, always a great show.

[colin_havens]

Originally Posted by avysittinon22s

Thanks, Ill be at Millington for sure, always a great show.

I will be there in my 67 small window. Its bagged, lays frame, and is blue and silver 2 toned with a yellow stripe seperating the 2 colors. Give me a shout if you get a chance man!