Edelbrock 1400 carb vaporizing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tthornt · 09-09-2010, 02:08 PM

Hey all - I'm running 283 small block in my 1983 chevy SWB with a edelbrock 1400 carb. My problem surfaces during hot/warm starts. The engine turns strong but will not start until i press the gas pedal.

I'm thinking about installing a heat shield under the carb. I need some help resolving this issue. let mr what your think

Thanks
Tony

GMC Guy · 09-09-2010, 04:58 PM

phenolic carb spacer. i had the same problem

piecesparts · 09-09-2010, 08:34 PM

I put on an Edelbrock 1" phenolic spacer and gained a large margin on the vapor locking issue. I also made sure that my fuel pump return lilne was working, because it tends to vapor lock in the fuel pump also.

benoit454 · 09-09-2010, 08:52 PM

I put the edelbrock heat insulator gasket under mine and it completely fixed the problem.

tucsonjwt · 09-09-2010, 11:00 PM

I just live with it on my Qjet. The spacer block would bring my Qjet up enough so the other stock pieces (vent hose from valve cover, heat tube from snorkel, etc.,) would not line up. When hot, I just depress accelerator to the floor and turn the key, wait until fired up, then release accelerator half way.

09-09-2010, 02:08 PM	#1
tthornt Registered User Join Date: May 2008 Location: greenville Alabama Posts: 63	Edelbrock 1400 carb vaporizing Hey all - I'm running 283 small block in my 1983 chevy SWB with a edelbrock 1400 carb. My problem surfaces during hot/warm starts. The engine turns strong but will not start until i press the gas pedal. I'm thinking about installing a heat shield under the carb. I need some help resolving this issue. let mr what your think Thanks Tony __________________ Country; LIKE A ROCK All that I am, I owe 62SWB-STEP 83SWB 86LWB

09-09-2010, 04:58 PM	#2
GMC Guy Registered User Join Date: May 2009 Location: Sparks, NV Posts: 913	Re: Edelbrock 1400 carb vaporizing phenolic carb spacer. i had the same problem __________________ Greg 1974 GMC 1/2 Ton SWB Fleetside L33 5.3/4l65e .................__ ............._____l __\__ ..............l_(O)_ l___(O)]

09-09-2010, 08:34 PM	#3
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Edelbrock 1400 carb vaporizing I put on an Edelbrock 1" phenolic spacer and gained a large margin on the vapor locking issue. I also made sure that my fuel pump return lilne was working, because it tends to vapor lock in the fuel pump also. __________________ Frank

09-09-2010, 08:52 PM	#4
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Edelbrock 1400 carb vaporizing I put the edelbrock heat insulator gasket under mine and it completely fixed the problem. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

09-09-2010, 11:00 PM	#5
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,188	Re: Edelbrock 1400 carb vaporizing I just live with it on my Qjet. The spacer block would bring my Qjet up enough so the other stock pieces (vent hose from valve cover, heat tube from snorkel, etc.,) would not line up. When hot, I just depress accelerator to the floor and turn the key, wait until fired up, then release accelerator half way.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.