C10Slim's 66 Build Thread - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C10Slim · 09-16-2010, 09:23 AM

Quote:

Originally Posted by apachedaddy

Could you give me some info on your steering column and wheel. Part numbers/IDIDIT??/dealer/ is it a retro fix column? Was looking at the IDIDIT colums from summit and wanted to see if there others out there that may be cheaper is all. Thanks for any info you might have for me.

It is an IDIDIT column retro fit series 1140657020 (column shift). The wheel, hub and horn button are Billet Specialties classic series.

I found the cheapest price on the column was Performance Online, they also had a 20% off moving sale going on at the time, so I really got a deal.

C10Slim · 10-12-2010, 08:59 PM

Almost done wiring! All the underhood wiring is complete. This flex-a-lite fan controller is awesome. Runs 2 stage will start a 40% and then ramp up to 100% as you reach temp. Also let the can run for 30 seconds after you shut it down. We also got everything in the dash wired up and the gauge panel mounted. We took the wiring through the driver side inner fender/wheel well and it worked out great. All we have left is to install the grille, headlights, parking lights and trim and the wiring will finally be complete! I also have a glass guy coming this weekend to install the front and rear glass. She is so close to being road worthy I can almost taste it!

C10Slim · 10-12-2010, 09:04 PM

Few more...

protrash64 · 10-12-2010, 09:25 PM

Nice work Slim........lookin' good.

Dinos63 · 10-13-2010, 12:45 AM

slick!! i am diggin the gauges

C10Slim · 01-05-2011, 10:04 PM

Painted the bed wood this weekend with KBS rust seal and blacktop gloss top coat. It turned out great looks like black glass. I just need to put the new polished bolt set in.

10-12-2010, 08:59 PM	#2
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: C10Slim's 66 Build Thread Almost done wiring! All the underhood wiring is complete. This flex-a-lite fan controller is awesome. Runs 2 stage will start a 40% and then ramp up to 100% as you reach temp. Also let the can run for 30 seconds after you shut it down. We also got everything in the dash wired up and the gauge panel mounted. We took the wiring through the driver side inner fender/wheel well and it worked out great. All we have left is to install the grille, headlights, parking lights and trim and the wiring will finally be complete! I also have a glass guy coming this weekend to install the front and rear glass. She is so close to being road worthy I can almost taste it! Attached Images

10-12-2010, 09:04 PM	#3
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: C10Slim's 66 Build Thread Few more... Attached Images

10-12-2010, 09:25 PM	#4
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: C10Slim's 66 Build Thread Nice work Slim........lookin' good. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

10-13-2010, 12:45 AM	#5
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: C10Slim's 66 Build Thread slick!! i am diggin the gauges __________________ CHEVY ONLY... Nothin Else !

01-05-2011, 10:04 PM	#6
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: C10Slim's 66 Build Thread Painted the bed wood this weekend with KBS rust seal and blacktop gloss top coat. It turned out great looks like black glass. I just need to put the new polished bolt set in. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.