Turbo 350 Tailshaft question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gregg72340 · 09-19-2010, 05:22 PM

Not sure is anyone out there is able to help me, My truck is an 85 Chevy 1/2 ton 2wd/305/Turbo 350 with a one piece driveshaft. I need to replace the trans and not sure what my tailshaft length is and the problem is my truck is 3 hours away and I am trying to find a trans locally before I go back to the truck again. I know the trans could have one of three tailshafts on it just wondering if anyone out there has the same set up in their truck and could measure their tailshaft for me.

Thanks
Gregg

**old Rusty C10** · 09-19-2010, 07:41 PM

mine is the 9 inch long tailshaft..i remember that from years ago

gregg72340 · 09-20-2010, 11:29 AM

Quote:

Originally Posted by old Rusty C10

mine is the 9 inch long tailshaft..i remember that from years ago

And yours is a one piece driveshaft/longbed, correct?

Patsfan34 · 09-20-2010, 07:12 PM

I sold the TH350 from my truck and it also had a 9 inch tailshaft. The guy buying the truck wanted me to measure to make sure the tailshaft was 9 inches which is what he said is for trucks only. I can't confirm that info but that's what I was told.

benoit454 · 09-20-2010, 10:19 PM

being an 85 if it does have a th350 it's probably a th350c which is lockup but regardless it's probably a 9 inch. Dad's 84 had a 1 piece DS and was 9 inch and short bed, he put in a short tail 6 inch th350 and got a 1 piece ds from a junkyard.

09-19-2010, 05:22 PM	#1
gregg72340 Registered User Join Date: May 2010 Location: ambler, pa Posts: 325	Turbo 350 Tailshaft question Not sure is anyone out there is able to help me, My truck is an 85 Chevy 1/2 ton 2wd/305/Turbo 350 with a one piece driveshaft. I need to replace the trans and not sure what my tailshaft length is and the problem is my truck is 3 hours away and I am trying to find a trans locally before I go back to the truck again. I know the trans could have one of three tailshafts on it just wondering if anyone out there has the same set up in their truck and could measure their tailshaft for me. Thanks Gregg __________________ Just would like the snow to stop so I can actually work on my truck!!!!!!!!!!!

09-19-2010, 07:41 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	Re: Turbo 350 Tailshaft question mine is the 9 inch long tailshaft..i remember that from years ago __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

09-20-2010, 07:12 PM	#4
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: Turbo 350 Tailshaft question I sold the TH350 from my truck and it also had a 9 inch tailshaft. The guy buying the truck wanted me to measure to make sure the tailshaft was 9 inches which is what he said is for trucks only. I can't confirm that info but that's what I was told.

09-20-2010, 10:19 PM	#5
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Turbo 350 Tailshaft question being an 85 if it does have a th350 it's probably a th350c which is lockup but regardless it's probably a 9 inch. Dad's 84 had a 1 piece DS and was 9 inch and short bed, he put in a short tail 6 inch th350 and got a 1 piece ds from a junkyard. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.