PCM is mounted! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jim_PA · 08-04-2010, 12:53 AM

It's about the best I could do! --

I need some kind of support bar to keep it from moving up and down, but other than that, its solid!

68GMCCustom · 08-04-2010, 01:05 AM

you got the little plastic cover with it too....nice!

Jim_PA · 08-04-2010, 01:12 AM

The cover and bracket was about $25 -- they must be one of those things that get wacked a lot in collisions, so they are pretty readily available (and cheap)

chevydog66 · 08-08-2010, 01:46 AM

Quote:

Originally Posted by Jim_PA

The cover and bracket was about $25 -- they must be one of those things that get wacked a lot in collisions, so they are pretty readily available (and cheap)

What year is your motor? I have a 01 6.0 LQ4. Wanting to know if my pcm would fit in that cover? Got a GM part for cover and bracket?

Jim_PA · 08-08-2010, 09:12 AM

All the pcm's I've ever seen were the same shape and size
These are the numbers

15071609
15047570

**Hart_Rod** · 08-24-2010, 08:02 PM

Quote:

Originally Posted by Jim_PA

All the pcm's I've ever seen were the same shape and size
These are the numbers

15071609
15047570

Where did you pick up the bracket at? I called a local salvage yard and they wouldn't sell me one and all of our pick n pulls don't have them either. Thanks,

r

chevydog66 · 08-24-2010, 11:57 PM

I have mine mounted also with the part #'s that Jim_PA listed. I bought them from a local GM parts seller, Midwest Auto parts.

68GMCCustom · 08-25-2010, 12:00 AM

Jim's been away...but will pick up soon.....hopefully.

**Hart_Rod** · 08-25-2010, 09:46 AM

Quote:

Originally Posted by chevydog66

I have mine mounted also with the part #'s that Jim_PA listed. I bought them from a local GM parts seller, Midwest Auto parts.

Called and ordered them today. Thanks!

67C10BUB · 09-24-2010, 11:32 PM

Quote:

Originally Posted by Jim_PA

All the pcm's I've ever seen were the same shape and size
These are the numbers

15071609
15047570

Do you know if these will also fit the gen 4 5.3L?

08-04-2010, 12:53 AM	#1
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	PCM is mounted! It's about the best I could do! -- I need some kind of support bar to keep it from moving up and down, but other than that, its solid! Attached Images Last edited by Jim_PA; 08-04-2010 at 12:53 AM.

08-04-2010, 01:05 AM	#2
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: PCM is mounted! you got the little plastic cover with it too....nice! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

08-04-2010, 01:12 AM	#3
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: PCM is mounted! The cover and bracket was about $25 -- they must be one of those things that get wacked a lot in collisions, so they are pretty readily available (and cheap)

08-08-2010, 09:12 AM	#5
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: PCM is mounted! All the pcm's I've ever seen were the same shape and size These are the numbers 15071609 15047570

08-24-2010, 11:57 PM	#7
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: PCM is mounted! I have mine mounted also with the part #'s that Jim_PA listed. I bought them from a local GM parts seller, Midwest Auto parts. Attached Images __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

08-25-2010, 12:00 AM	#8
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: PCM is mounted! Jim's been away...but will pick up soon.....hopefully. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.