09-12-2010, 03:27 PM | #1 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
1970 c-10 parts
i have a 1970 truck i bought for suspension parts. The cab is in good shape it has some rust by the cowl but the roof and floor are in great shape it will need some body work on the back side of the cab. The cab also comes with a vintage air set up in the cab already but it is missing parts. $500 obo
The bed is in decent shape its going to need body work to the passenger side rear bedside due to accident also the bed is line x in the inside. short bed only- sold new fleetside lettered tailgate with all the linkage- sold 2- gas tanks behind the seat with sending units $100 each- one is sold black vinyl seat ok condition looks good but tracks are rusty springs in good shape- sold passenger door very good condition no rust- sold 12 bolt rear 3.08 open leaf spring rear end $250 obo everything is located in ft. lauderdale florida
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver Last edited by apollos1970; 09-28-2010 at 06:22 PM. |
09-13-2010, 02:43 AM | #2 |
Registered User
Join Date: Aug 2010
Location: Miami
Posts: 46
|
Re: 1970 c-10 parts
I need the cab, the gas tank, sending unit, and I'd take the door! I'll see what I can do.. your even relatively close. I'm selling a car on ebay, the auction is over in 2 days, this is most likely where the money will come from.. if you still have the cab and stuff by the time I collect it, I will contact you.
|
09-13-2010, 05:46 PM | #3 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
Re: 1970 c-10 parts
pm sent....
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver |
09-14-2010, 03:14 PM | #4 |
Senior Member
Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,424
|
Re: 1970 c-10 parts
Is the tailgate lettered or plain?
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
09-14-2010, 03:42 PM | #5 |
It's alsways something.....
Join Date: Nov 2008
Location: Douglasville GA
Posts: 1,171
|
Re: 1970 c-10 parts
I'm interested in the vintage air system if you'll pull and ship it-
__________________
1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e |
09-14-2010, 06:58 PM | #6 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
Re: 1970 c-10 parts
the tailgate is lettered
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver |
09-14-2010, 06:59 PM | #7 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
Re: 1970 c-10 parts
chuck i got a couple guys looking at the cab this weekend if it doesnt work out ill let you know
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver |
09-15-2010, 04:53 PM | #8 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
Re: 1970 c-10 parts
bump.....
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver |
09-15-2010, 04:56 PM | #9 |
Senior Member
Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,424
|
Re: 1970 c-10 parts
Could you post pics or send pics via email, and get me a shipping quote to 46562?
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
09-15-2010, 04:59 PM | #10 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
Re: 1970 c-10 parts
i can send pics through email what were you interested in
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver |
09-15-2010, 05:00 PM | #11 |
Senior Member
Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,424
|
Re: 1970 c-10 parts
Pics of the tailgate, I'll pm my email address.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
09-15-2010, 08:22 PM | #12 |
86 Scottsdale
Join Date: May 2010
Location: Mooresville NC
Posts: 473
|
Re: 1970 c-10 parts
|
09-17-2010, 05:08 PM | #13 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
Re: 1970 c-10 parts
bump...
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver |
09-19-2010, 10:02 AM | #14 |
86 Scottsdale
Join Date: May 2010
Location: Mooresville NC
Posts: 473
|
Re: 1970 c-10 parts
Is the gate still available? I pm'ed you and never got a response.
|
09-19-2010, 08:01 PM | #15 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
Re: 1970 c-10 parts
Sorry about that pm sent
Posted via Mobile Device
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver |
09-19-2010, 08:31 PM | #16 |
It's alsways something.....
Join Date: Nov 2008
Location: Douglasville GA
Posts: 1,171
|
Re: 1970 c-10 parts
Still interested in the a/c
__________________
1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e |
09-22-2010, 05:49 PM | #17 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
Re: 1970 c-10 parts
chuck i sent you a pm with my number call me so we can figure something out
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver |
09-22-2010, 07:57 PM | #18 |
GobbleStalker Calls
Join Date: Aug 2010
Location: Port Hope, Ontario
Posts: 653
|
Re: 1970 c-10 parts
Still waiting for the shipping quote for the tailgate to 13601 NY State. Thanks
__________________
72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride ) |
09-23-2010, 03:46 PM | #19 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
Re: 1970 c-10 parts
quote sent
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver |
09-25-2010, 02:11 PM | #20 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
Re: 1970 c-10 parts
ttt........
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver |
09-26-2010, 03:52 PM | #21 |
(007) aka Houdini
Join Date: Mar 2010
Location: ROCKMART/ROME GA
Posts: 354
|
Re: 1970 c-10 parts
you sell the tailgate if not please send me info and pics to hsbr6969@yahoo.com im very interested in it thanks .....Kurt
__________________
Live life one day at a time! |
09-28-2010, 06:23 PM | #22 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
Re: 1970 c-10 parts
its is sold
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver |
Bookmarks |
|
|