NC WTB - K10 Hub Assembly - The 1947 - Present Chevrolet & GMC Truck Message Board Network

silver7 · 10-01-2010, 05:15 PM

Looking to buy a K10 hub assembly in good shape which will match my current spindles. I'm pretty sure the damaged hub assembly I'm looking to replace is a 1971.

My current spindle dimensions:

Inner journal diameter: 1.78"

Outer journal diameter: 1.625"

teeitup · 10-01-2010, 05:56 PM

Shawn, I have these 4. Driver quality chrome, they are on 71 and 72 1/2 4x4 front ends. $32 shipped a pair. Thanks Randy

silver7 · 10-01-2010, 08:13 PM

Thanks Randy. I already have some WARN locking hubs, I'm looking for the metal hub assembly these fit inside.

This is the part I am looking for. Are you saying yours are for sale, or just the locking part?

drunkbus · 10-01-2010, 10:50 PM

I have the dana 44 out of my Blazer sitting in my garage. I could pull the hubs off if Randy can't help you.

teeitup · 10-01-2010, 11:06 PM

I was just going to sell the lockouts, sorry. Thanks Randy

silver7 · 10-02-2010, 07:00 AM

Thanks drunkbus. What year is your Blazer?

drunkbus · 10-02-2010, 12:22 PM

Quote:

Originally Posted by silver7

Thanks drunkbus. What year is your Blazer?

72. I have one off already. I'll check when I get home later today if it's the same. I'll post some pics for you.

drunkbus · 10-02-2010, 08:11 PM

Here's what I've got.

silver7 · 10-03-2010, 07:09 PM

Thanks for posting the pics. Assuming there is no damage I can't see they look good to me. Were you able to confirm the inner diameter of the inner and outer bearings?

drunkbus · 10-03-2010, 09:07 PM

Quote:

Originally Posted by silver7

Thanks for posting the pics. Assuming there is no damage I can't see they look good to me. Were you able to confirm the inner diameter of the inner and outer bearings?

Where do you want me to check the measurements? On the spindle where the bearing rides? If your interested I'll clean them up better and check for damage but I think they are fine. $50 for the pair shipped.

drunkbus · 10-03-2010, 09:24 PM

Just measured the inside diameter of the bearings and they're the same as yours.

drunkbus · 10-03-2010, 09:32 PM

I just looked at your other post about this. I think mine are like the one on the left in your other pictures. The picture that D.Passmore posted of the spindles, my spindles are like the ones in the middle of that photo, the small bearing type if that helps.

silver7 · 10-04-2010, 04:52 PM

Sounds good. Can you do $40 for the pair shipped through Paypal?

drunkbus · 10-04-2010, 05:43 PM

Quote:

Originally Posted by silver7

Sounds good. Can you do $40 for the pair shipped through Paypal?

I'll do $45 shipped for the pair and hope I can fit them both in a flat rate box or I'll get hammered on shipping with how heavy they are. paypal is fine also.

10-01-2010, 05:15 PM	#1
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	WTB - K10 Hub Assembly Looking to buy a K10 hub assembly in good shape which will match my current spindles. I'm pretty sure the damaged hub assembly I'm looking to replace is a 1971. My current spindle dimensions: Inner journal diameter: 1.78" Outer journal diameter: 1.625" __________________ Shawn 1971 C10 4x4

10-01-2010, 05:56 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB - K10 Hub Assembly Shawn, I have these 4. Driver quality chrome, they are on 71 and 72 1/2 4x4 front ends. $32 shipped a pair. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-01-2010, 08:13 PM	#3
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	Re: WTB - K10 Hub Assembly Thanks Randy. I already have some WARN locking hubs, I'm looking for the metal hub assembly these fit inside. This is the part I am looking for. Are you saying yours are for sale, or just the locking part? Attached Images __________________ Shawn 1971 C10 4x4 Last edited by silver7; 10-01-2010 at 08:15 PM.

10-01-2010, 10:50 PM	#4
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: WTB - K10 Hub Assembly I have the dana 44 out of my Blazer sitting in my garage. I could pull the hubs off if Randy can't help you.

10-01-2010, 11:06 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB - K10 Hub Assembly I was just going to sell the lockouts, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-02-2010, 07:00 AM	#6
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	Re: WTB - K10 Hub Assembly Thanks drunkbus. What year is your Blazer? __________________ Shawn 1971 C10 4x4

10-02-2010, 08:11 PM	#8
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: WTB - K10 Hub Assembly Here's what I've got. Attached Images

10-03-2010, 07:09 PM	#9
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	Re: WTB - K10 Hub Assembly Thanks for posting the pics. Assuming there is no damage I can't see they look good to me. Were you able to confirm the inner diameter of the inner and outer bearings? __________________ Shawn 1971 C10 4x4

10-03-2010, 09:24 PM	#11
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: WTB - K10 Hub Assembly Just measured the inside diameter of the bearings and they're the same as yours.

10-03-2010, 09:32 PM	#12
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: WTB - K10 Hub Assembly I just looked at your other post about this. I think mine are like the one on the left in your other pictures. The picture that D.Passmore posted of the spindles, my spindles are like the ones in the middle of that photo, the small bearing type if that helps.

10-04-2010, 04:52 PM	#13
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	Re: WTB - K10 Hub Assembly Sounds good. Can you do $40 for the pair shipped through Paypal? __________________ Shawn 1971 C10 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.