![]() |
![]() |
#1 |
Registered User
Join Date: Aug 2009
Location: gray court sc
Posts: 62
|
rear end
what rear end will fit my 53 3100 ? please help!
![]() ![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2010
Location: Plano, TX
Posts: 319
|
Re: rear end
Direct bolt in an s-10 rear is going to be the closest.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2003
Location: San Francisco, CA USA
Posts: 2,454
|
Re: rear end
Any 1/2 ton truck rear up to about 69 will be very close to stock width and will let you keep the 6 lug pattern, if that is important. You might have to move the spring mounts though.
The S-10 rear is quite a bit narrower than stock, but would be good if you are going after the deep wheel look. Ray |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
|
Re: rear end
Not really a dumb question, a lot of rear ends will fit here is my 53 with a 74 nova rear end. I am using 8inch wheels with 4 inch backspacing and 235/60-15 tires. I also have 2 in lowering blocks.
|
![]() |
![]() |
![]() |
#5 |
Cancer Survivor in the making.
Join Date: Mar 2005
Location: Bainbridge Island, WA
Posts: 303
|
Re: rear end
I'm using a '73 Chevelle wagon rear under mine.
![]()
__________________
'55 1st GMC Suburban - '54 GMC 1-ton trailer puller (in process) - '54 GMC 1-ton Hydra-Matic - '47 Chevy AD COE and lots more rusty old iron. Steve@OldSub.com OldSub.com . MaxwellGarage.com . OldGasTowRigs.com |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2010
Location: Charleston Wv
Posts: 159
|
Re: rear end
Ford EPLODER 8.8
Posted via Mobile Device |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2010
Location: Granbury ,TX
Posts: 268
|
Re: rear end
|
![]() |
![]() |
![]() |
#8 |
AD Addict
Join Date: Oct 2009
Location: Blissfield, MI
Posts: 822
|
Re: rear end
Skip the S10. They are too narrow, even in 4x4 unless you can get a ZR2. Camaro is OK. S10 4x4 needs spacers or deeper wheels. Search for Mongo's Garage, he had a list.
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Sep 2007
Location: mckinney, tx
Posts: 141
|
Re: rear end
Put a 9-inch in it with 31 inch splines, out of 79 f150 the passenger side is perfect and only have to cut the drivers side. Running 10-inch rims in back with 8 in front... 265/60r15 in the back custom ordered them with 3-inch white wall.. If you gonna put some muscle in the car go with the 9-inch...and slammit with air ride.
Last edited by 53lochevy; 10-05-2010 at 04:48 PM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|