Porterbuilt 67-72 Gas Adjust Hood Hinge Option - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PBFAB.COM · 10-05-2010, 01:40 PM

Porterbuilt Gas-Adjust Hood Hinge for 67-72

Say good-bye to the old hood prop! We’ve finally buttoned up our gas-adjust hood hinge option for our popular 67-72 cowl mounted hood hinges. This upgrade is a must for all those currently running the PB hinges!

67-72 Porterbuilt Hood Hinges with gas adjust: $389
Gas-Adjust option: $165

smbrouss70 · 10-05-2010, 02:22 PM

Looks good Nate! I noticed on my hinges that there was a hole that I hadn't seen before, I figured that's where the struts would hook up!

jlaird · 10-05-2010, 09:57 PM

Nate,

does this design replace the one where the strut was in the cowl?

blazed89 · 10-06-2010, 01:51 AM

u owe me two pairs of the up grades what bout the 60-66

SCOTTMO · 10-06-2010, 11:57 AM

Looks good Nate,I like the display pic with all the parts laid out so you know
what you are getting.Is that the 55 % black on those ?

PBFAB.COM · 10-06-2010, 12:22 PM

Quote:

Originally Posted by SCOTTMO

Looks good Nate,I like the display pic with all the parts laid out so you know
what you are getting.Is that the 55 % black on those ?

That's my Rustoleom Satin display paint!

PBFAB.COM · 10-06-2010, 12:24 PM

Quote:

Originally Posted by jlaird

Nate,

does this design replace the one where the strut was in the cowl?

Yes. The other design, though trick it was, became far to complicated and thus expensive. I ran into a few snags that were going to make it extremely difficult to produce and sell at a "reasonable" cost.

sandnuriz · 10-06-2010, 12:29 PM

Are you going to build them for other years? Look sick

jasonhall · 10-06-2010, 01:14 PM

Awesome.. Some more pb parts i need to buy..

6772owner · 10-06-2010, 02:04 PM

As usual, awesome work and service from you Nate!

10-05-2010, 01:40 PM	#1
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Porterbuilt 67-72 Gas Adjust Hood Hinge Option Porterbuilt Gas-Adjust Hood Hinge for 67-72 Say good-bye to the old hood prop! We’ve finally buttoned up our gas-adjust hood hinge option for our popular 67-72 cowl mounted hood hinges. This upgrade is a must for all those currently running the PB hinges! 67-72 Porterbuilt Hood Hinges with gas adjust: $389 Gas-Adjust option: $165 __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

10-05-2010, 02:22 PM	#2
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: Porterbuilt 67-72 Gas Adjust Hood Hinge Option Looks good Nate! I noticed on my hinges that there was a hole that I hadn't seen before, I figured that's where the struts would hook up! __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

10-05-2010, 09:57 PM	#3
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: Porterbuilt 67-72 Gas Adjust Hood Hinge Option Nate, does this design replace the one where the strut was in the cowl?

10-06-2010, 01:51 AM	#4
blazed89 Registered User Join Date: Nov 2006 Location: san jose Posts: 25	Re: Porterbuilt 67-72 Gas Adjust Hood Hinge Option u owe me two pairs of the up grades what bout the 60-66

10-06-2010, 11:57 AM	#5
SCOTTMO powdercoater Join Date: Dec 2008 Location: mesa,az Posts: 203	Re: Porterbuilt 67-72 Gas Adjust Hood Hinge Option Looks good Nate,I like the display pic with all the parts laid out so you know what you are getting.Is that the 55 % black on those ? __________________ SCOTT

10-06-2010, 12:29 PM	#8
sandnuriz Registered User Join Date: Sep 2010 Location: Bakersfield,Ca. Posts: 340	Re: Porterbuilt 67-72 Gas Adjust Hood Hinge Option Are you going to build them for other years? Look sick __________________ 57 Chevy shortbed,327,Muncie 4 speed,12 Bolt rear end(current project) It's your ride build it the way you want !!!!!!!!!!

10-06-2010, 01:14 PM	#9
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: Porterbuilt 67-72 Gas Adjust Hood Hinge Option Awesome.. Some more pb parts i need to buy..

10-06-2010, 02:04 PM	#10
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: Porterbuilt 67-72 Gas Adjust Hood Hinge Option As usual, awesome work and service from you Nate! __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.