|
10-07-2010, 08:45 PM
|
#1 |
|
Registered User
Join Date: May 2010
Location: jackson, michigan
Posts: 246
|
gas tank cleaning
Got all ready to head to the muffler shop yesterday and put about 10 gallons of gas in my truck. This was the first time i put gas in it since i've owned it other than about a gallon. Within about one minute, it stopped running and would not start. Seemed it was not getting gas. I disconnected the line to the carb and placed a clear bottle over the end and cranked it to see if the pump was working. Well, it was and i had a pop bottle of what looked like coffee, very dark brown. Filter was plugged and so is the carb now. Cranked it some more using a gallon jug and the gas now looks as it should but I need to clean the carb and get it unplugged. Figure it's the needle valve. If i have any more trouble, I'm going to pull the tank and clean it out. What's the best way to clean a gas tank? Also, after cleaning, do i need to coat the inside with any kind of shielding?
|
|
|
|
10-07-2010, 08:59 PM
|
#2 |
|
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: gas tank cleaning
Here’s an opinion from one of the senior forum members:
http://67-72chevytrucks.com/vboard/s...light=gas+tank And a bit more information: http://67-72chevytrucks.com/vboard/s...light=gas+tank Last edited by markeb01; 10-07-2010 at 09:01 PM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
