Ordered disc disc prop. valve and it has 5 ports...?

[oldblue1968chevy]

2 ports on the top for the MC lines

1 port on the back going to the rear brakes

1 port on the bottom front going to the front brakes

1 port on front going up at an angle, where does this go? (its right above the button)..

thanks

[Shane]

plug it ...

[oldblue1968chevy]

ok..

what does it go too (if imma plug a port, id rather plug a port on the bottom or somewhere out of sight...)

thanks

[way2lo2]

Originally Posted by oldblue1968chevy

ok..

what does it go too (if imma plug a port, id rather plug a port on the bottom or somewhere out of sight...)

thanks

its there so you can run one to each front wheel. We typically tee the front wheels together and plug that port. I've been getting away from using the combination valves lately and have been using the adjustable proportioning valves for better tuning.

[oldblue1968chevy]

yea the fronts are T'd togeter at the crossmember..

(only 2 lines comming up to prop. valve, 1 for the rears and 1 for the fronts...

also i wanna paint my mc but it nees to be baked @ 200* F i took snap ring out but there is stillome kind of rubber/plunger in there..hwo does it come out?