72 K10 4X4 Exhaust Kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Virginia72SWB4X4 · 10-10-2010, 03:34 PM

I need to replace the exhaust on my 72 short wheelbase 4x4. It has headers I plan to keep. Are there dual exhaust kits available that work with a little cutting or welding or am I better of having a custom system installed locally?
I'm interested in 2 1/2" pipes.

Gary

hgs_notes · 10-10-2010, 05:08 PM

I just bought a hooker kit through summit racing for my 4x4 jimmy. I wouldn't recommend it. They are supposed to send me a new tube to replace one that is bent wrong, the next 2 tubes were not expanded enough to fit over the next section, I won't know if there are other issues until I get the new pipe and can try to finish the install.

On my other truck I'll use a different kit.

Virginia72SWB4X4 · 10-10-2010, 09:38 PM

Thanks.

I'd be interested in how the rest of the install goes when you get the replacement pipe.

Gary

69TowRig · 10-11-2010, 09:31 AM

I have the LMC system, it fit great on my stock manifold Blazer. It is made for long-bed trucks you just cut down the intermediate pipes for your truck. A few others around here have the same system.

Virginia72SWB4X4 · 10-14-2010, 09:12 PM

Thanks Chris I'll take a look at LMC. I'd be curious how difficult converting the kit to headers may be.

Thanks Gary

red71cheyenne · 10-15-2010, 12:22 AM

I got this kit for the Blazer, only really used the over the axle parts, but it worked out fine. I had already had 90's bent for the manifolds and was running 6 foot of straight pipe out to mufflers.

http://www.jegs.com/i/Dynomax/289/89007/10002/-1

10-10-2010, 03:34 PM	#1
Virginia72SWB4X4 Registered User Join Date: Jan 2004 Location: Fredericksburg, Virginia Posts: 144	72 K10 4X4 Exhaust Kit I need to replace the exhaust on my 72 short wheelbase 4x4. It has headers I plan to keep. Are there dual exhaust kits available that work with a little cutting or welding or am I better of having a custom system installed locally? I'm interested in 2 1/2" pipes. Gary

10-10-2010, 05:08 PM	#2
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: 72 K10 4X4 Exhaust Kit I just bought a hooker kit through summit racing for my 4x4 jimmy. I wouldn't recommend it. They are supposed to send me a new tube to replace one that is bent wrong, the next 2 tubes were not expanded enough to fit over the next section, I won't know if there are other issues until I get the new pipe and can try to finish the install. On my other truck I'll use a different kit. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

10-10-2010, 09:38 PM	#3
Virginia72SWB4X4 Registered User Join Date: Jan 2004 Location: Fredericksburg, Virginia Posts: 144	Re: 72 K10 4X4 Exhaust Kit Thanks. I'd be interested in how the rest of the install goes when you get the replacement pipe. Gary

10-11-2010, 09:31 AM	#4
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: 72 K10 4X4 Exhaust Kit I have the LMC system, it fit great on my stock manifold Blazer. It is made for long-bed trucks you just cut down the intermediate pipes for your truck. A few others around here have the same system. __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

10-14-2010, 09:12 PM	#5
Virginia72SWB4X4 Registered User Join Date: Jan 2004 Location: Fredericksburg, Virginia Posts: 144	Re: 72 K10 4X4 Exhaust Kit Thanks Chris I'll take a look at LMC. I'd be curious how difficult converting the kit to headers may be. Thanks Gary

10-15-2010, 12:22 AM	#6
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: 72 K10 4X4 Exhaust Kit I got this kit for the Blazer, only really used the over the axle parts, but it worked out fine. I had already had 90's bent for the manifolds and was running 6 foot of straight pipe out to mufflers. http://www.jegs.com/i/Dynomax/289/89007/10002/-1 __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.