![]() |
![]() |
#1 |
Registered User
Join Date: Dec 2008
Location: Austin, MN
Posts: 117
|
"Custom" Wood Bed.
Got an idea from all the wood beds here and came up with this. Box is 6' X 8' foot (LWB). Used two sheets of 4X8 plywood, cut a foot off of each one, coated with 4 coats of McCloskey's weather sealer, covered seams with lattice strips. Bolted to the frame with carriage bolts with BIG washers. Whadda ya think? Does it look ok?
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2008
Location: Austin, MN
Posts: 117
|
Re: "Custom" Wood Bed.
The finished product.
|
![]() |
![]() |
![]() |
#3 |
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
Re: "Custom" Wood Bed.
looks good ... and if you like it then that's all that matters.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Nov 2007
Location: Abilene, Texas
Posts: 10
|
Re: "Custom" Wood Bed.
Very resourceful, I like it! Plus were not all able to shell out the clams for a whole wood bed kit right now. Good work!
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2008
Location: 505
Posts: 447
|
Re: "Custom" Wood Bed.
Looks nice. Good job!
Posted via Mobile Device
__________________
'68 SWB Fleetside '98 K1500 Silverado |
![]() |
![]() |
![]() |
#6 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: "Custom" Wood Bed.
Looks good! And if you ever intend to use it as a truck you won't have to worry about dinging a high dollar wood bed kit or the metal strips...
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Nov 2009
Location: Austin Tx
Posts: 639
|
Re: "Custom" Wood Bed.
Looks good! Might been kinda cool if you made some fake lines with a darker colored stain. Kinda were it looks like planks... Im just thinking out loud...
|
![]() |
![]() |
![]() |
#8 |
BLACK SATIN
![]() Join Date: Jan 2009
Location: canton, IL
Posts: 266
|
Re: "Custom" Wood Bed.
I think it looks good. I put plywood over my old wood bed & found some black sealer to match the truck color.
__________________
67 C10 Fleetside LWB-283, 3 on the tree,power assisted steering, father-in-law bought it new 67 C20 Fleetside LWB-'85 305 V8 (original was 250 6 cyl), Holley 600 carb, full length Hedman headers, dual exhaust behind the back wheels, 4 spd , manual steering 85 C10 Silverado- 305ci |
![]() |
![]() |
![]() |
#9 |
classic=of recognized value
Join Date: Sep 2008
Location: Wichita, KS
Posts: 317
|
Re: "Custom" Wood Bed.
Are there holes someplace for water to drain out (rain/washing, etc.)?
Looks nice. |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: "Custom" Wood Bed.
Looks great!!!
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
![]() |
![]() |
![]() |
#11 |
Account Suspended
Join Date: Jun 2010
Location: Placerville Ca.
Posts: 982
|
Re: "Custom" Wood Bed.
Looks great!!!
You can also add divider strips using the low buck method. Use thin strips of stainless about 2 inches wide and lay out evenly spaced on top of the plywood drill 1/8 holes spaced max of 2 inches and use either long aluminum rivets or stainless button or counter sunk screws. I used the rivet method on mine "diamond plate aluminum" and they pull down and hold surprisingly well in dry plywood...haven't lifted at all in 6 years but I don't haul anything either. If you do use it for work just throw some scrap ply on top of a blanket and away you go >>>>>>>>>>>>>>>>>>>>Rushnbobo ![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|