Kustom Gauges in dash bezel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

texastruckjunky · 10-10-2010, 10:41 AM

I would like to see how you put or mounted your after market gauges in your dash. Is it a bolt in or is all kustom work? I'd like to put new gauges in my truck but would like to see how some of you mounted them. Thanks in advance.

cpetersen · 10-10-2010, 10:54 AM

x2

texastruckjunky · 10-14-2010, 05:04 AM

I can't believe nobody has pictures of there guage install....

dmwphoto · 10-14-2010, 06:05 AM

I bought a full kit from Classicdash.com with Phantom Autometer guages. IT was a tedious but not difficult install. I wanted to get rid of the aftermarket tach on the column and aftermarket guages under the dash. here is some before and after pics. any questions just hollar.

before

preparing the new stuff

added an Ididit polished tilt column

hope this helps.

Dave

MrClean · 10-14-2010, 10:37 AM

Quote:

Originally Posted by texastruckjunky

i would like to see how you put or mounted your after market gauges in your dash. Is it a bolt in or is all kustom work? I'd like to put new gauges in my truck but would like to see how some of you mounted them. Thanks in advance.

x3

texastruckjunky · 10-14-2010, 09:49 PM

Dave that looks kool, but I plane on using the original guage panel. I have seen some on this forum, I just would like to know how other people mounted the after market guages. Thanks for posting.

67ChevyRedneck · 10-14-2010, 09:53 PM

I did this with my 3 hole cluster...

chevy_mike · 10-15-2010, 04:30 PM

Though I have gotten seriously side tracked with my '65 truck, here is what I am working on for my '68.

**DA68** · 10-16-2010, 08:53 AM

Chevy_Mike, do you have a build thread going? I want to see where you are going with that dash. Looks good so far.

heyray · 10-16-2010, 11:26 AM

thats pretty cool! I bet you could sell a few of those.

luvmtrks4366 · 10-16-2010, 01:38 PM

Looks like your on to something there chevy mike. Mine would sure be nicer if they were angled up to see a little better.

**slomotion** · 10-16-2010, 02:07 PM

Here's a couple shots of a set of Classic Instruments in a stock bezel. Actually, the gauges are mounted to an aluminum plate, and the plate is mounted to the bezel.

red69ss · 10-16-2010, 02:18 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=398475 here's a link to a thread with a bunch in it.

texastruckjunky · 10-17-2010, 07:02 PM

Quote:

Originally Posted by red69ss

http://67-72chevytrucks.com/vboard/s...d.php?t=398475 here's a link to a thread with a bunch in it.

Thanks that helped alot. Now i'm starting to want something diffrent, and go with a kustom panel also, alot of those look really kool.

chevy_mike · 10-19-2010, 12:38 PM

My signiture has the link to my build thread on the '68. Need to get back to working on that project.

Putter · 10-19-2010, 01:05 PM

I am working on attaching photos, but here is a whole thread with member clusters
CLUSTERS

Here are two I built for other members

Ryan Hubbard · 10-19-2010, 04:30 PM

Here is my dash panel and radio console and glove box. I did all these on my mill.

10-10-2010, 10:41 AM	#1
texastruckjunky Registered User Join Date: May 2009 Location: San Antonio,Texas Posts: 220	Kustom Gauges in dash bezel I would like to see how you put or mounted your after market gauges in your dash. Is it a bolt in or is all kustom work? I'd like to put new gauges in my truck but would like to see how some of you mounted them. Thanks in advance.

10-10-2010, 10:54 AM	#2
cpetersen Registered User Join Date: Feb 2010 Location: mesa az Posts: 211	Re: Kustom Gauges in dash bezel x2

10-14-2010, 05:04 AM	#3
texastruckjunky Registered User Join Date: May 2009 Location: San Antonio,Texas Posts: 220	Re: Kustom Gauges in dash bezel I can't believe nobody has pictures of there guage install....

10-14-2010, 06:05 AM	#4
dmwphoto Registered User Join Date: Sep 2010 Location: Richmond, Va Posts: 573	Re: Kustom Gauges in dash bezel I bought a full kit from Classicdash.com with Phantom Autometer guages. IT was a tedious but not difficult install. I wanted to get rid of the aftermarket tach on the column and aftermarket guages under the dash. here is some before and after pics. any questions just hollar. before preparing the new stuff added an Ididit polished tilt column hope this helps. Dave Last edited by dmwphoto; 10-14-2010 at 06:06 AM.

10-14-2010, 09:49 PM	#6
texastruckjunky Registered User Join Date: May 2009 Location: San Antonio,Texas Posts: 220	Re: Kustom Gauges in dash bezel Dave that looks kool, but I plane on using the original guage panel. I have seen some on this forum, I just would like to know how other people mounted the after market guages. Thanks for posting.

10-14-2010, 09:53 PM	#7
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Kustom Gauges in dash bezel I did this with my 3 hole cluster... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

10-15-2010, 04:30 PM	#8
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Kustom Gauges in dash bezel Though I have gotten seriously side tracked with my '65 truck, here is what I am working on for my '68. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

10-16-2010, 08:53 AM	#9
DA68 Registered User Join Date: Oct 2006 Location: Ohio Posts: 967	Re: Kustom Gauges in dash bezel Chevy_Mike, do you have a build thread going? I want to see where you are going with that dash. Looks good so far.

10-16-2010, 11:26 AM	#10
heyray Registered User Join Date: Oct 2010 Location: LA/Phoenix Posts: 31	Re: Kustom Gauges in dash bezel thats pretty cool! I bet you could sell a few of those. __________________ 72 Blazer 4wd 72 Blazer 2wd 69 Blazer 4wd easy to take apart hard to finish. Ray of all trades master of none.

10-16-2010, 01:38 PM	#11
luvmtrks4366 Registered User Join Date: Nov 2007 Location: Beaverton, OR. Posts: 37	Re: Kustom Gauges in dash bezel Looks like your on to something there chevy mike. Mine would sure be nicer if they were angled up to see a little better.

10-16-2010, 02:07 PM	#12
slomotion Old Duffer Join Date: Mar 2003 Location: Maine Posts: 1,823	Re: Kustom Gauges in dash bezel Here's a couple shots of a set of Classic Instruments in a stock bezel. Actually, the gauges are mounted to an aluminum plate, and the plate is mounted to the bezel. Attached Images __________________ '68 Short C20 Flatbed Dually w/ 292 4bbl, Langdon cast headers, and WC T5 trans. '81 G10 Shorty Van "Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers "Under promise, then over achieve."

10-16-2010, 02:18 PM	#13
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 854	Re: Kustom Gauges in dash bezel http://67-72chevytrucks.com/vboard/s...d.php?t=398475 here's a link to a thread with a bunch in it. __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

10-19-2010, 12:38 PM	#15
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Kustom Gauges in dash bezel My signiture has the link to my build thread on the '68. Need to get back to working on that project. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

10-19-2010, 01:05 PM	#16
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Kustom Gauges in dash bezel I am working on attaching photos, but here is a whole thread with member clusters CLUSTERS Here are two I built for other members __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 10-19-2010 at 01:14 PM.

10-19-2010, 04:30 PM	#17
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Kustom Gauges in dash bezel Here is my dash panel and radio console and glove box. I did all these on my mill. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.