Heater Core 2000 1/2 ton.

[Justin87]

I had one of the fittings break off on my 2000 Sierra. Also 1/2 ton. The fittings are replaceable. They snap on. Should be able to get them at any auto parts store. Getting the rest of the old fitting off was a pita tho.

[HarrisonTX]

Originally Posted by Justin87

I had one of the fittings break off on my 2000 Sierra. Also 1/2 ton. The fittings are replaceable. They snap on. Should be able to get them at any auto parts store. Getting the rest of the old fitting off was a pita tho.

If they are replacable, and snap on, how to they snap off (remove).

This could be alot easier than expected.

[clinebarger]

Originally Posted by HarrisonTX

If they are replacable, and snap on, how to they snap off (remove).

This could be alot easier than expected.

Take a hacksaw blade & carefully make two cuts long ways 180degrees apart on the plastic fitting. when you get the fitting off just slip the heater hose on the heater core & clamp it, No need to buy the plastic fitting.

[HarrisonTX]

Originally Posted by clinebarger

Take a hacksaw blade & carefully make two cuts long ways 180degrees apart on the plastic fitting. when you get the fitting off just slip the heater hose on the heater core & clamp it, No need to buy the plastic fitting.

Sounds doable... BUT, basically its like this. I live ina 40x60' metal building. Its mainly a shop, with a small living area that I stay in. It sounds weird, but its bad ass.

Anyways, people often think I'm a mechanic shop, and ask if I can handle small jobs (my place is in a industrial area). He just has the heater hoses looped, so I'm sure he will be thankful for a working heater. I'd like to keep it professional, but I guess thats how they've been down for years...

The hack saw idea isnt bad. I'll probably work on it tomorrow.

[HarrisonTX]

Originally Posted by clinebarger

Take a hacksaw blade & carefully make two cuts long ways 180degrees apart on the plastic fitting. when you get the fitting off just slip the heater hose on the heater core & clamp it, No need to buy the plastic fitting.

Thanks brother.
One Fort Worth Person, helping another.
Thats exactly what I did. My first customer, and I made a cool $25 in half an hour.

[clinebarger]

No problem, Time to up the labor rate