S-10 Blazer Board? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

82 Silverado 4X · 06-12-2003, 05:55 PM

Anyone have a link to a good S-10 Blazer group. I picked up a 91 4wd that needs some work (and parts) for my son 15 year old son. Any suggestions would really be a big help.
Thanks

ItsNotABlazer · 06-13-2003, 02:32 PM

I am almost certain www.chevytalk.com has a S10 section. I know there are some sites dedicated strictly to S10's also but I do not know the links

Brad

Low83 · 06-13-2003, 03:56 PM

www.blazinlow.com

2000 BLAZER LS
Pewter Silver
2/3 BellTech drop
18" KRUZ rims
PIRELLI Scorpion Zeros
BILSTEIN shocks
KN
FLOWMASTER

**crossy** · 06-14-2003, 12:38 AM

http://forums.s-series.org

I just picked up the exact same one you have. I am fixing it to sell and needed a few questions answered.
I got NO response at Chevytalk so i went on a hunt and found the one above. I need 2 fenders and a door but Carlisle is in 2 weeks so i'll find what i need there. L8R, DAVE

82 Silverado 4X · 06-14-2003, 08:11 AM

Thanks. I joined Blazenlow.com last night and even found a few local members. The setup is very similar to this forum.
Crossy: If you can't find what you need at Carlisle they probably never made it. I'll check out the site you suggested tonight.

The PO owner of the Blazer sold it to me for $200.00 because he said it had a spun main bearing. The body had a new front clip still in primer but the core support was still damaged and it made the front of the front fenders sit too low leaving a gap at the top of the doors. The rest of the body really looked rough (small dents and lots of primer)but it was actually pretty solid. The black interior was really dirty but didn't have any rips. It has power everything except the seats. I figured if the motor was trashed I could always part it out to recoup my investment.
When I got it home I threw in a battery. It fired right up and something sounded like it was about to come apart but it didn't sound like a spun main to me. I removed the serpantine belt to eliminate the bolt on accesories and fired it up again. This time it sat there running as quiet and smooth as can be. It turns out that the alternator had a really bad bearing. The shaft had about a 1/4 of slop.
My son already gutted the interior and removed the front clip. We'll do the body and paint then clean up the interior and reinstall it.
It will make an excellent 1st car for him.

**crossy** · 06-14-2003, 08:39 AM

yeah, I'm not an S10 guy ,but I bought mine cheap with a' bad ' tranny and the intention of parting it out . it needs 2 fenders & a door.Not wrecked just beat up. looked into the tranny and I found a piece of rubber line that was kinked so hard it was pinched off. took 2 hours to fix it right but the tranny is fine. SOMETIMES you win, not often

but sometimes.

82 Silverado 4X · 06-14-2003, 08:48 AM

Yea, it's great when something finally works out your way. Hope you end up making a big profit on it when you sell.

TooMany2count · 06-14-2003, 04:55 PM

http://coloradok5.com/forums/ubbthreads.php?Cat=

http://www.v8s10.org/forum/

http://www.s10forum.com/forum/

here's a couple......joe

06-12-2003, 05:55 PM	#1
82 Silverado 4X Genuine Chevrolet Join Date: Feb 2003 Location: South West Pennsylvania. Posts: 582	S-10 Blazer Board? Anyone have a link to a good S-10 Blazer group. I picked up a 91 4wd that needs some work (and parts) for my son 15 year old son. Any suggestions would really be a big help. Thanks __________________ George 82 Silverado LWB 4x4 350 SM465 NP208 77 Chevrolet Blazer Chalet 400 TH350 NP203

06-13-2003, 02:32 PM	#2
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	I am almost certain www.chevytalk.com has a S10 section. I know there are some sites dedicated strictly to S10's also but I do not know the links Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

06-14-2003, 12:38 AM	#4
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	http://forums.s-series.org I just picked up the exact same one you have. I am fixing it to sell and needed a few questions answered. I got NO response at Chevytalk so i went on a hunt and found the one above. I need 2 fenders and a door but Carlisle is in 2 weeks so i'll find what i need there. L8R, DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

06-14-2003, 08:11 AM	#5
82 Silverado 4X Genuine Chevrolet Join Date: Feb 2003 Location: South West Pennsylvania. Posts: 582	Thanks. I joined Blazenlow.com last night and even found a few local members. The setup is very similar to this forum. Crossy: If you can't find what you need at Carlisle they probably never made it. I'll check out the site you suggested tonight. The PO owner of the Blazer sold it to me for $200.00 because he said it had a spun main bearing. The body had a new front clip still in primer but the core support was still damaged and it made the front of the front fenders sit too low leaving a gap at the top of the doors. The rest of the body really looked rough (small dents and lots of primer)but it was actually pretty solid. The black interior was really dirty but didn't have any rips. It has power everything except the seats. I figured if the motor was trashed I could always part it out to recoup my investment. When I got it home I threw in a battery. It fired right up and something sounded like it was about to come apart but it didn't sound like a spun main to me. I removed the serpantine belt to eliminate the bolt on accesories and fired it up again. This time it sat there running as quiet and smooth as can be. It turns out that the alternator had a really bad bearing. The shaft had about a 1/4 of slop. My son already gutted the interior and removed the front clip. We'll do the body and paint then clean up the interior and reinstall it. It will make an excellent 1st car for him. __________________ George 82 Silverado LWB 4x4 350 SM465 NP208 77 Chevrolet Blazer Chalet 400 TH350 NP203

06-14-2003, 08:39 AM	#6
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	yeah, I'm not an S10 guy ,but I bought mine cheap with a' bad ' tranny and the intention of parting it out . it needs 2 fenders & a door.Not wrecked just beat up. looked into the tranny and I found a piece of rubber line that was kinked so hard it was pinched off. took 2 hours to fix it right but the tranny is fine. SOMETIMES you win, not often but sometimes. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

06-13-2003, 03:56 PM	#3
Low83 Registered User Join Date: Aug 2002 Location: Porterville,Ca. Posts: 118	www.blazinlow.com 2000 BLAZER LS Pewter Silver 2/3 BellTech drop 18" KRUZ rims PIRELLI Scorpion Zeros BILSTEIN shocks KN FLOWMASTER

06-14-2003, 08:48 AM	#7
82 Silverado 4X Genuine Chevrolet Join Date: Feb 2003 Location: South West Pennsylvania. Posts: 582	Yea, it's great when something finally works out your way. Hope you end up making a big profit on it when you sell. __________________ George 82 Silverado LWB 4x4 350 SM465 NP208 77 Chevrolet Blazer Chalet 400 TH350 NP203

06-14-2003, 04:55 PM	#8
TooMany2count Who's in CHARGE?????????? Join Date: Nov 2002 Location: Cahokia, IL Posts: 455	http://coloradok5.com/forums/ubbthreads.php?Cat= http://www.v8s10.org/forum/ http://www.s10forum.com/forum/ here's a couple......joe __________________ Send a card to a soldier in Iraq My Music PlayList Large Marge Donate Blood,Plasma,Platelets & sign your DONORS CARD & SAVE a LIFE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.