Shocking Problem!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lo72 · 10-22-2010, 06:22 PM

Has anyone bought a drop kit from CPPJEFF? I bought a complete 4.5/6 drop flip kit shackles springs spindles and shocks for my 85 C-10. Problem is rear shocks are too short! The passenger side top shock mount is about 1 5/8 inches farther away than the driver side measuring to the axle centerline. The bed is off and the axle is square in the frame. I PMed Jeff a couple of days ago, but no response as yet. Could one of you guys measure your mounts and post it up? I'm stumped. The shocks are doesch 4052G and are 15 1/2 extended and 10 compressed. I don't have a fricking clue....Come on guys jump in here and help a GA boy out! Thanks Greg

*nbpro* · 10-22-2010, 07:23 PM

i don't have any pics to offer but did the kit come with Shock extenders ? not certain those would help your problem good luck

lo72 · 10-22-2010, 07:47 PM

No, the are no shock extenders. The shocks are too short.

48cj2a · 10-22-2010, 08:10 PM

Quote:

Originally Posted by lo72

I don't have a fricking clue....Come on guys jump in here and help a GA boy out!

Greg no offense but I would spell "Georgia" out rather then abbreviate in a statement like that if I was you

lo72 · 10-22-2010, 08:26 PM

Gotcha GEORGIA boy! better?
Posted via Mobile Device
Posted via Mobile Device

f.monroe · 10-22-2010, 08:35 PM

I have some of the same shocks and found that they seemed too short for my truck . I used the stock shocks . Are you trying to install the shocks with the truck at ride height or with the rear springs fully extended . If it is sitting on the ground with the springs compressed and it is still too short , then I imagine you will need different shocks. My drop shocks are still in the boxes for the same reason you mention . My truck is dropped 5 inches in back and they do not work for me .
Frank

cochino12 · 10-22-2010, 08:38 PM

Quote:

Originally Posted by 48cj2a

Greg no offense but I would spell "Georgia" out rather then abbreviate in a statement like that if I was you

lo72 · 10-22-2010, 10:04 PM

Thanks f.monroe. You used the stock shocks? Where did u get yours?
Posted via Mobile Device

f.monroe · 10-22-2010, 10:21 PM

Quote:

Originally Posted by lo72

Thanks f.monroe. You used the stock shocks? Where did u get yours?
Posted via Mobile Device

The shocks I used are just stock replacements .
Frank

*nbpro* · 10-22-2010, 10:42 PM

i thought shock extenders provide additional length for your shock absorbers and put the shock at a better angle for proper function. may be wrong tho

f.monroe · 10-22-2010, 11:10 PM

Quote:

Originally Posted by nbpro

i thought shock extenders provide additional length for your shock absorbers and put the shock at a better angle for proper function. may be wrong tho

I could use some extenders with the stock length shocks . The problem he is having ,and the problem I had ,i s that the Drop shocks are too short to fit. Shock extenders would just make the problem worse with the drop shocks.
Frank

bigblock73 · 10-22-2010, 11:35 PM

Are you sure you have the fronts on the front, and rears on the rear? I thought my back drop shocks were too short, turns out I was trying to put the fronts on the back...lol. Switched them around, fit like a glove.

lo72 · 10-23-2010, 08:13 AM

Thanks bigblock73, the front shocks are shorter than the rear shocks. Now i'm worried the front shocks may b too short as well. Thanks Greg
Posted via Mobile Device
Posted via Mobile Device

10-22-2010, 06:22 PM	#1
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Shocking Problem!! Has anyone bought a drop kit from CPPJEFF? I bought a complete 4.5/6 drop flip kit shackles springs spindles and shocks for my 85 C-10. Problem is rear shocks are too short! The passenger side top shock mount is about 1 5/8 inches farther away than the driver side measuring to the axle centerline. The bed is off and the axle is square in the frame. I PMed Jeff a couple of days ago, but no response as yet. Could one of you guys measure your mounts and post it up? I'm stumped. The shocks are doesch 4052G and are 15 1/2 extended and 10 compressed. I don't have a fricking clue....Come on guys jump in here and help a GA boy out! Thanks Greg

10-22-2010, 07:23 PM	#2
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Shocking Problem!! i don't have any pics to offer but did the kit come with Shock extenders ? not certain those would help your problem good luck Last edited by nbpro; 10-22-2010 at 07:24 PM.

10-22-2010, 07:47 PM	#3
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: Shocking Problem!! No, the are no shock extenders. The shocks are too short.

10-22-2010, 08:26 PM	#5
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: Shocking Problem!! Gotcha GEORGIA boy! better? Posted via Mobile Device Posted via Mobile Device

10-22-2010, 08:35 PM	#6
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Shocking Problem!! I have some of the same shocks and found that they seemed too short for my truck . I used the stock shocks . Are you trying to install the shocks with the truck at ride height or with the rear springs fully extended . If it is sitting on the ground with the springs compressed and it is still too short , then I imagine you will need different shocks. My drop shocks are still in the boxes for the same reason you mention . My truck is dropped 5 inches in back and they do not work for me . Frank __________________ Born and proudly residing in a Red State !

10-22-2010, 10:04 PM	#8
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: Shocking Problem!! Thanks f.monroe. You used the stock shocks? Where did u get yours? Posted via Mobile Device

10-22-2010, 10:42 PM	#10
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Shocking Problem!! i thought shock extenders provide additional length for your shock absorbers and put the shock at a better angle for proper function. may be wrong tho

10-22-2010, 11:35 PM	#12
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: Shocking Problem!! Are you sure you have the fronts on the front, and rears on the rear? I thought my back drop shocks were too short, turns out I was trying to put the fronts on the back...lol. Switched them around, fit like a glove. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

10-23-2010, 08:13 AM	#13
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: Shocking Problem!! Thanks bigblock73, the front shocks are shorter than the rear shocks. Now i'm worried the front shocks may b too short as well. Thanks Greg Posted via Mobile Device Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.