The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-19-2010, 07:09 PM   #1
Allens86
Registered User
 
Allens86's Avatar
 
Join Date: Sep 2008
Location: San Jose California
Posts: 111
Motor problems...

So lately when my truck shifts into a higher gear and its in the lower part of that gear everything will be very shaky. Also when I'm driving and have the gas pedal set at a certain point it will be going one speed and then start accelerating by itself until it shifts to the next gear without me moving my foot.


If anyone has had this similar problem or might know what it could be any help would be appreciated.
__________________
...............................____
.................________-|___\____
..;.;;.:;:;.,;.|__(O)___|____/_(O)|
1986 Chevy Custom Deluxe
Nothing like a square body
http://67-72chevytrucks.com/gallery/...0&ppuser=45891
Allens86 is offline   Reply With Quote
Old 10-19-2010, 08:51 PM   #2
old Rusty C10
Robert Olson Transport
 
old Rusty C10's Avatar
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,277
Re: Motor problems...

are you sure the part of shaky in the bottom end of the gear is not pre ignition?
__________________
Bob



1951 International running on a squarebody chassis


"If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board"
http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!)


PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport

Live each day to the fullest.. you never know when fate is going to pull the rug out from under you...
I hate cancer!!
old Rusty C10 is offline   Reply With Quote
Old 10-20-2010, 09:48 AM   #3
jchav62
1962 C-10
 
jchav62's Avatar
 
Join Date: Apr 2005
Location: Las Vegas, New Mexico
Posts: 4,978
Re: Motor problems...

When's the last time the trucks had a tune-up. Plugs, wires, cap, rotor...
__________________
Joseph Chavez
"See the USA in a Chevrolet!!"
......................_____
.........________//__{\_____
,,,,,,,/__(O)___//___/__(O)_/

1962 C10 Shortbed Fleetside 327/th350 GV overdrive
1974 C10 Longbed Fleetside 350/th350 "The Trash Truck"
1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4
2015 GMC Sierra SLE 1500 4x4

Last edited by jchav62; 10-20-2010 at 09:48 AM.
jchav62 is offline   Reply With Quote
Old 10-20-2010, 08:14 PM   #4
Allens86
Registered User
 
Allens86's Avatar
 
Join Date: Sep 2008
Location: San Jose California
Posts: 111
Re: Motor problems...

I just recently changed the plugs rotor and distributor cap. I also had thought it had to do with my fuel pump because it was staling out so I changed the pump and I've changed the fuel filter.
__________________
...............................____
.................________-|___\____
..;.;;.:;:;.,;.|__(O)___|____/_(O)|
1986 Chevy Custom Deluxe
Nothing like a square body
http://67-72chevytrucks.com/gallery/...0&ppuser=45891
Allens86 is offline   Reply With Quote
Old 10-20-2010, 09:56 PM   #5
GMC Guy
Registered User
 
GMC Guy's Avatar
 
Join Date: May 2009
Location: Sparks, NV
Posts: 913
Re: Motor problems...

possible vacuum leak? that would cause the motor to idle high and when put in gear, want to accelerate without you touching the gas
__________________
Greg
1974 GMC
1/2 Ton SWB Fleetside
L33 5.3/4l65e

.................__
............._____l __\__
..............l_(O)_ l___(O)]
GMC Guy is offline   Reply With Quote
Old 10-23-2010, 12:56 AM   #6
Allens86
Registered User
 
Allens86's Avatar
 
Join Date: Sep 2008
Location: San Jose California
Posts: 111
Re: Motor problems...

Turns out that my plug wire was laying up against my headers and was causing it to miss fire. Also there is a possibility that my carb is caked up figuring its still the original one that's never been touched. Also the mixture control solenoid is bad.


So I'm going to have to get a new carb that will also pass smog. Does anyone know where to get either another Quadrajet or any other carb that's California smog exempt.
__________________
...............................____
.................________-|___\____
..;.;;.:;:;.,;.|__(O)___|____/_(O)|
1986 Chevy Custom Deluxe
Nothing like a square body
http://67-72chevytrucks.com/gallery/...0&ppuser=45891
Allens86 is offline   Reply With Quote
Old 10-23-2010, 03:14 PM   #7
GMC Guy
Registered User
 
GMC Guy's Avatar
 
Join Date: May 2009
Location: Sparks, NV
Posts: 913
Re: Motor problems...

Quote:
Originally Posted by Allens86 View Post
Turns out that my plug wire was laying up against my headers and was causing it to miss fire. Also there is a possibility that my carb is caked up figuring its still the original one that's never been touched. Also the mixture control solenoid is bad.


So I'm going to have to get a new carb that will also pass smog. Does anyone know where to get either another Quadrajet or any other carb that's California smog exempt.
http://www.summitracing.com/parts/EDL-1400/
__________________
Greg
1974 GMC
1/2 Ton SWB Fleetside
L33 5.3/4l65e

.................__
............._____l __\__
..............l_(O)_ l___(O)]
GMC Guy is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:01 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com